• 한국의류학회지
• /
• 제27권2호
• /
• pp.219-228
• /
• 2003

The purpose of this study were to examine the characteristics of arm types proposed in the previous study and to present sleeve patterns according size and shape of 4 arm types. 31 direct and indirect items were measured. The subjects for this study were 132 females of twenties. The results were as follows. 1. All of the direct measurements showed significant difference by the arm types. especially at the front armhole part. Such a.: the items of arm gradients, armhole sizes belong to the indirect measurements made clear difference also. 2. By the discriminant analysis, 9 items including underarm length, front armhole girth, upper arm girth, degree of elbow point-wrist point discriminated arm type by the hit ratio of 90.4% Item related to shape of arm rather than size made a sharp distinction. 3. Through the examination of existing patterns and wearing tests on the subjects among 4 groups, sleeve patterns classified by the arm type were suggested.

• 소성∙가공
• /
• 제20권1호
• /
• pp.48-53
• /
• 2011

Fasteners are used to join the various electronic products and machines. So, the quality and reliability of the fastener are strongly requested. In this study, the analyses of the multi-stage cold forging of TORX screws for storage parts are carried out. In manufacturing of TORX screws, crack and folding defects are observed. Therefore, the analysis is focused on the prediction of the defects. Based on the analysis results, the upper die and process conditions are redesigned to reduce the defects. The upper die shape for preform forming is redesigned to prevent folding and sharp shape change. The Cockroft-Latham damage criterion is introduced to predict the crack initiation. Analysis results shows that the maximum Cockroft-Latham damage value is decreased by 40% in the forming using the modified upper die.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1047-1050
• /
• 1997

Rapid Prototyping(RP) is an efficient method for rapid design verification and trial manufacturing. In order to improve their unique characteristics according to the working principles. Variable Lamination Manufacturing process and corresponding CAD/CAM system is developed. The objective of this study is to improve dimensional accuracy of VLM-ST process, and it can be done by offset for cutting error correction, cutting path correction for sharp edge and reference shape generation. To verify the proposed algorithms, they applied to three-dimensional shapes, such as spanner and mechanical part.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.80-87
• /
• 2002

Tungsten carbide microshaft is used as micro-punch, electrode of MEDM (micro-electro-discharge machining), and micro-tool because it has high hardness and high rigidity. In this study, the tungsten carbide microshaft was fabricated using electrochemical machining. Concentration of material removal at the sharp edge and metal corrosion layer affect the shape of the microshaft. Control of microshaft shape was possib1e through conditioning the machining voltage and electrolyte concentration. By applying periodic voltage, material removal rate increased and surface roughness improved. The fabricated microshaft in $H_2 SO_4$ electrolyte maintained sharper end edge and better surface finish than those fabricated by other electrolytes.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2015년도 하계학술대회
• /
• pp.516-517
• /
• 2015

The automatic traffic sign detection and recognition has been one of the highly researched and an important component of advanced driver assistance systems (ADAS). They are designed especially to warn the drivers of imminent dangers such as sharp curves, under construction zone, etc. This paper presents a traffic sign recognition (TSR) system using morphological operations and multiple descriptors. The TSR system is realized in three stages: segmentation, shape classification and recognition stage. The system is designed to attain maximum accuracy at the segmentation stage with the inclusion of morphological operations and boost the computation time at the shape classification stage using MB-LBP descriptor. The proposed system is tested on the German traffic sign recognition benchmark (GTSRB) and on Korean traffic sign dataset.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.191-197
• /
• 2003

As mechanical components are miniaturized, the demand on micro die and mold is increasing. Micro mechanical components usually have high hardness and good conductivity. So micro electrical discharge machining (MEDM) is an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of cavity is distorted. Electric charges tend to be concentrated at the sharp edge. At the center of the bottom surface, debris can not be drawn off easily. These two phenomena make the bottom surface of the electrode and workpiece distort. As machining depth increases, the distorted shape of electrode approaches hemisphere. This process is affected by capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• 열처리공학회지
• /
• 제20권1호
• /
• pp.1-10
• /
• 2007

The deformation behaviors of full annealed and T6 treated 6061, 7075 aluminum tubes are investigated at various temperature performing uniaxial tensile test. Full annealed Al 6061 and Al7075 tubes, and T6 treated Al7075 tube don't show sharp local necking with an elongation of 50% at $300^{\circ}C$. So it is expected that influenced by elevated tempterature. At $300^{\circ}C$ and strain rate of 0.001/s, many micro-cracks are observed in T6 treated Al 6061 tube, which is believed to be responsible for the decrease of total elongation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.44-48
• /
• 2005

As mechanical components are miniaturized, the demands on micro die/mold are increasing. Micro mechanical components usually have high hardness and good conductivity. Micro electrical discharge machining (MEDM) can thus be an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of the cavity is distorted. Electric charges tend to be concentrated at the sharp edge, and debris cannot be drawn off easily at the center of the bottom surface. These two phenomena make the bottom surface of electrode and workpiece distort. As machining depth increases, the distorted shape of the electrode approaches hemisphere. This process is affected by both capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• 한국수자원학회논문집
• /
• 제40권1호
• /
• pp.51-62
• /
• 2007

횡월류위어의 월류량을 산정하기 위해서는 횡월류위어의 흐름특성을 분석하고 유량계수를 산정하는 것이 필요하다. 본 연구에서는 수리실험을 통하여 직사각형, 삼각형 횡월류위어에 대하여 본류의 Froude 수, 횡월류위어의 폭, 위어정각 등의 형상변화에 따른 유량계수를 산정하였다. 횡월류위어의 유량계수는 횡월류위어의 형상 및 기하학적 조건과 본류의 Froude수에 따라 변하는 것으로 나타났다. 다중 회귀분석을 통하여 직사각형과 삼각형 횡월류위어의 유량계수식을 제시하였으며, 측정된 월류량과의 비교 분석을 통해 적용성을 확인하였다.

• 패션비즈니스
• /
• 제12권5호
• /
• pp.77-93
• /
• 2008

The purpose of the study was to examine make-up expression elements of horror characters as an evil spirit, a vampire, a zombie, a monster and a psycho murderer through make-up, focused on horror movies of the United States after1960s. First, an evil spirit was expressed that the pupil grew dim without a focus and the skin was torn by going bad and rot completely. Also, it was expressed that its teeth was changed to pointed canine teeth as a wild beast and its pale and bloodless face showed blood vessels clearly. To express its bloodless and pale skin, air brush was swept into the skin over several times. Its canine tooth was made acryl powder into its shape and was harden to make its shape smooth. Also, it was colored to show people like the real thing. Second, a vampire was expressed by make-up elements as long nails, a sharp canine tooth, a pale skin with a blood vessel and dead eyes. Its rough skin and long nails were manufactured with latex foam, which was colored like the skin. Third, a monster image as a werewolf was expressed by make-up elements as fur, sharp teeth, changed nails and toenails, a rough skin and a face changed to a wolf. Rubber mask and rubber body suit were manufactured as a make-up of special character and so all its body was changed. Fourth, a psycho murderer and body-deformed man were expressed by make-up elements as a distorted mask, swelled-up and deformed skull and face form, terribly deformed body, discolored and hang down skin and teeth with an indeterminate form. Its body and face were manufactured by the foam latex technology according to make-up design as a make-up of special character.