• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.111-116
• /
• 2005

We propose a BASK (Binary Amplitude Shift Keying) system for Giga-bit Modem in millimeter band. The proposed system consists of a high speed shutter of the transmitter and a repeater of the receiver. The shutter of the proposed system is introduced for pulse shaping to improve the intersymbol interference (ISI). The repeater consists of several stage converters. A converter is constructed with a low pass filter and a limiter. The repeater can improve the signal-to-noise ratio (SNR) and make the rectangular pulse train. The proposed system is a simple system that uses conversion method without IF (Intermediate Frequency) process.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.99-101
• /
• 2015

Massive stars are some of the most influential objects in the Universe, shaping the evolution of galaxies, creating chemical elements and hence shaping the evolution of the Universe. However, the processes by which they form and how they shape their environment during their birth processes are not well understood. We use $NH_3$ data from "The $H_2O$ Southern Galactic Plane Survey" (HOPS) survey to define the positions of dense cores/clumps of gas in the southern Galactic plane that are likely to form stars. Then, using data from "The Millimetre Astronomy Legacy Team 90 GHz" (MALT90) survey, we search for the presence of infall and outflow associated with these cores. We subsequently use the "3D Molecular Line Radiative Transfer Code" (MOLLIE) to constrain properties of the infall and outflow, such as velocity and mass flow. The aim of the project is to determine how common infall and outflow are in star forming cores, and therefore to provide valuable constraints on the timescales and physical process involved in massive star formation. Preliminary results are presented here.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.737-744
• /
• 2012

EDM is the manufacturing process that uses the thermal energy to machine electrically conductive part. Despite a lot of research has been conducted for decades, the best aspect ratio of the micro hole using micro-EDM has not been over 30, yet. In the present study, new fabrication scheme was introduced to increase the aspect ratio of micro hole dramatically. Micro holes with less than 10 aspect ratio were aligned and welded together to manufacture a micro hole with extreme aspect ratio. Alignment of the micro hole with over 380 aspect ratio was conducted by the home-made apparatus installed with microscope and laser beam. The micro hole with extreme aspect ratio was used to shape pencil beam from proton beam generated from MC-50 cyclotron. The pencil beam was utilized to machine test specimen whose result was compared with GEANT4 computer simulation. It was shown that the experimental and simulation result were closer as the aspect ratio of the micro hole was bigger.

• Journal of architectural history
• /
• v.33 no.1
• /
• pp.45-60
• /
• 2024

This study aims to examine the cutting traces remaining on the bracket tie beams of Sungnyemun gate, identifying the tools employed during the late Goryeo to early Joseon periods by specific processes, and deliberating on the timber shaping techniques utilized in advanced architectural construction during the late Goryeo to early Joseon eras. Through the research, it was confirmed that in the production of Sungnyemun Gate's bracket tie beams during the 14th to 15th centuries, both the timber splitting and ripsawing methods were used in conjunction. Moreover, the wood finishing process revealed the use of a plane. It can be inferred that the characteristics of the plane used during that time were not significantly different from those observed in the later period of the Joseon dynasty. The ripsawing and plane finishing techniques were evident in various parts of the bracket tie beams of Sungnyemun gate across the reigns of king Taejo and Sejong, indicating that the techniques involving ripsaw and plane were already prevalent in the late Goryeo period. Consequently, it can be inferred that the ripsawing and plane finishing techniques might have been applied in the construction of prominent government buildings in Hanyang(Seoul), including Gyeongbokgung Palace, and in the residences of royalty and nobility after the establishment of the Joseon dynasty.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.111-118
• /
• 2007

Hydroforming is a cost-effective way of shaping malleable metals such as steel into lightweight, structurally stiff and strong pieces. With the increased use of the hydroformed components in automotive and aerospace industries, it is important to know the variations of the mechanical properties in the hydroforming process far the safe and durable design purposes. The principal goal of this paper is to suggest a procedure to evaluate the variations of tensile and fatigue properties before and after a hydroforming process. A miniature specimen, which is 0.2 mm thick and 2.3 mm wide, is devised and tested to measure local mechanical properties. The effects of specimen size, defects, surface roughness, and hydroforming on the tensile and fatigue behaviors are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.825-829
• /
• 1993

As a part of the Department of Energy's Environmental Restoration and Waste Management Program, long-reach manipulators are being considered for the retrieval of waste from large storage tanks. Long-reach manipulators may have characteristics significantly different from those of typical industrial robots because of the flexibility of long links needed to cover the large workspace. To avoid structural vibrations during operation, control algorithms employing various types of shaping filters were investigated. A new approach that uses imbedded simulation was developed and compared with others. In the new approach, generation of joint trajectories considering link flexibility was also investigated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2010

Recently optical and electric and electronic forms in the field of ultra fine patterns has been used extensively, and techniques of the optical parts are required that can precision-machine this micro-patterns such as V or R-shaped micro-groove patterns. In this study, V and R type, shaping the way micro groove brass machining process to characterize the material feed rate and cutting depth and the V and R as a variable brother, using two kinds of diamond tools for each picture shape and surface roughness caused by conditions such as chips, processed through the analysis of effects of geometry and analysis such as precision machining.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.489-495
• /
• 2015

Forging is a manufacturing process involving the shaping of metal using localized compressive forces and the process of deforming metal into a predetermined shape using certain tools and press according to the temperature. Forging provides stronger metal parts than that possible by casting or machining. Conventional clutch jaw parts have been developed through cold forging and precision machining; however, fabrication of integral clutch jaw parts for farm machinery has not been reported yet. These parts were developed by applying a complex forging technology combining cold and hot forging. The integrated forming technology proposed in this study will be useful for reducing the lead-time for manufacturing, improving the accuracy of products, and eliminating the welding process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.83-84
• /
• 2006

Due to the capability of net shaping for complex 3D geometry, powder injection molding (PIM) is widely used for automotive parts, electronics and medical industry. In this study, an ultrasonic dental scaler tip produced by machining process was redesigned for the PIM process. An injection mold was designed and manufactured to produce the dental scaler tip by the PIM process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.501-502
• /
• 2006

The present investigation has been performed on full densification behavior and mechanical property of the powder injection molded Fe-8wt%Ni nanoalloy powder. The net shaping process of the nanopowder was conducted by powder injection molding (PIM) process. The key-process for fabricating fully densified net-shaped nanopowder by pressureless sintering is an optimal control of agglomerate size of nanopowder. Enhanced mechanical property of PIMed Fe-Ni nanopowder is explained by grain refinement and microstructural uniformity.