Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Cutting Chip and Surface Roughness in Micro Groove Cutting of Brass

황동의 Micro Groove 가공시 절삭칩과 표면거칠기

  • 민경탁 (인천대학교 기계공학과) ;
  • 장호수 (인천대학교 대학원 기계공학과)
  • Received : 2010.02.27
  • Accepted : 2010.07.15
  • Published : 2010.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently optical and electric and electronic forms in the field of ultra fine patterns has been used extensively, and techniques of the optical parts are required that can precision-machine this micro-patterns such as V or R-shaped micro-groove patterns. In this study, V and R type, shaping the way micro groove brass machining process to characterize the material feed rate and cutting depth and the V and R as a variable brother, using two kinds of diamond tools for each picture shape and surface roughness caused by conditions such as chips, processed through the analysis of effects of geometry and analysis such as precision machining.

Keywords

References

  1. Tae-Jin Je, 2004, A Study on Micro Cutting Technology for Micro Parts, Department of Engineering Science & Mechanics Graduate School Kum-Oh National Institute of Technolohy
  2. Zinan Lu, Takeshi Yoneyama, 1999, "Micro cutting in the micro lathe turning system", International Journal of Machine Tools & Manufacture, Vol. 39, pp. 1171?1183 https://doi.org/10.1016/S0890-6955(98)00092-3
  3. M.A. Davies, C.J.Evans, S.R.Patterson, R. Vohra, B.C.Bergner, "Application of precision diamond machining to the manufacture of micro-photonics components", Proc. of SPIE, Vol. 5183.
  4. J.B. Ko, G. H. Kim, J. H. Won, 2001, "A Study on the cutting characteristics of non-ferrous metals using diamond turning machine", Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, No, 5
  5. Han Seok Lim, 1997, Accuracy Improvement in Micro-Grooving by Diamond Tool, Department of Mechanical and Precision Engineering Graduate School, Pusan National University
  6. Seong Min Son, Han Seok Lim and Jung Hwan Ahn, 2005, "effects of the friction coefficient on the minimum cutting thickness in cutting", International Journal of Machine Tools and Manufacture Volume 45. Issues 4-5, pp. 529-535 https://doi.org/10.1016/j.ijmachtools.2004.09.001
  7. Han Bock Soo, Lee So Young, 2001, "Characteristics of Surface Roughness in Micro Turning using PCD Tools", Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, No. 5
  8. Keon-Hee Kim, 1999, The cutting property of non-ferrous metals using diamond turning machine, Department of Mechanical Engineering Graduate School Chung-Nam National University
  9. Lee Sun-Woo, Lee Dong-Ju, Lee Eung-Sug, Je Tae-Jin, 2001, "Micro-groove Cutting Experiments using Micro-Machining System", Proceedings of the Ksmte Spring Conference 2001, pp. 263-268