• Science of Emotion and Sensibility
• /
• v.12 no.1
• /
• pp.87-96
• /
• 2009

Recently, there is a tendency of consumer's participation gradually increasing in the design shaping process. Consumers make evaluation or suggestion about the shape of the product, and the industries lay out schemes to elicit consumers' participation. However, when it comes to dealing with the shape of the product, consumer and designer has a fundamental difference in their point of view, and it works as interruption to the efficient communication between the consumer and designer. Therefore, this study will examine the difference of consumer's and designer's view of products' shape, and the guidelines of effective molding which elicit the consumers' affective responses. First, I established the sensible image vocabulary based on the shape of the product. And based on the vocabulary, I carried out the same experiments to the consumers and designers. As a result, the affective responses of the two groups toward the shape have similar characteristics and designers' reactions found out to be more dramatic than consumers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1106-1112
• /
• 2009

The SC-FDMA(single carrier-frequency division multiple access) was recently adopted as the uplink multiple access scheme from 3GPP LTE(3rd Generation Partnership Project Long Tenn Evolution) due to its low PAPR (Peak-to-averaged power ratio). The bandwidth of IFDMA(interleaved FDMA), one of the sub-carrier mapping methods of SC-FDMA, gets narrower as the roll-off factor of RRC(root raised cosine) filter decreases from 1 to 0, whereas its PAPR can increase significantly. In practice, to increase the power efficiency of an amplifier, signals with high PAPR undergo the process of clipping. Clipping of signals may cause regeneration of high-frequency components as well as distortion of signals. The current paper deals with the effect of clipping on the spectrum and BER of IFDMA signals with RRC filters.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.251-271
• /
• 2015

This article examines the HRD implications of using robotic technology in the workplace. Because existing literature has been primarily about the technical engineering aspects of robotics, it is difficult to understand the socio-cultural perspective about the challenges and potentials of robotization in the workplace. Especially, in order to identify the best organizational support appropriate for working with robots, this article indicates alternative perspective for observing human-robot interaction in the workplace. In addition, this article points out four implications of robotic technology in organizations for practice and research development in HRD. These implications were identified as (1) defining the components of expertise in terms of human-robot interaction, (2) coping with organizational change process resulting from robotic technology, (3) designing appropriate interventions for an organization to effectively assist human-robot interaction, and (4) establishing the code of work ethics in the robotic age. The suggested implications can contribute to shaping conceptual frameworks for further empirical social science research.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.1
• /
• pp.37-43
• /
• 2008

A lot of models have been developed for prevention of human errors. Nevertheless most of them failed to attract attention of industry which has been looking for an integrative model that can show practical countermeasures as well as causal factors of human errors. This research aimed to develop a comprehensive model that can mainly be applied to industrial fields. Therefore, in the model, it was tried to explain sequences of an operator's information process that might cause human errors on one hand, and life cycle stages of facilities involved when human errors occur on the other hand. This model was validated by using a typical accident case. With the comprehensive model presented in this research, one could follow up the sequence of human errors caused by operators, and errors made at the design stage which might cause accidents could be tracked. As a consequence, it is expected that much attention would be paid to preventing human errors in industrial fields since safety personnel can easily find out cause of human errors throughout life cycle stages of man-machine facilities if utilizing the suggested model.

• Journal of the Economic Geographical Society of Korea
• /
• v.8 no.2
• /
• pp.285-299
• /
• 2005

The economic reform in China since 1978 has been increasingly sped up and deepened. The recent development of private enterprises, especially, has significant economic and political implications, whereas its regional differentiation has considerable impacts on both the development potential of certain regions and overall regional growth pattern. This study aims to understand the regional pattern of private enterprise growth as well as the institutional change which has structured the growth process. The development of private enterprises turned out to be closely tied to the marketization strategy of dual-track system and policy needs to reduce the unemployment level in both urban and 겨ral China. The regional pattern of the private enterprise growth can be characterized as ever-increasing spatial differentiation. Based on the basic statistical analysis results, it is argued that the private enterprise growth is closed related with the marketization level of the regional economy. Therefore, the strategy of developing private sector will be more important in shaping the regional development path as well as potential.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.153-160
• /
• 2015

The marble powder is a by-product that can be freely collected during the manufacturing process of marble, such as sawing, shaping, and polishing. Disposal of this waste powder is one of the environmental problems worldwide today. Therefore, this study investigated to solve this problem by consuming the waste marble powder in high fluidity concrete, as a pore filler. For this purpose, the waste marble powder was used as a binder replacing 5%, 10%, 15%, and 20% of cement in high fluidity concrete. After mixing, slump flow test, time-to-reach the slump flow of 500mm test, O-lot test and U-box test were conducted with fresh concrete. For the hardened concrete, compressive strength was determined at the age of 28 days. According to the test results, the workability of high fluidity concrete increased with the powder of 15% replacement, and the compressive strength of high fluidity concrete also increased with the same amount of powder.

• Phonetics and Speech Sciences
• /
• v.2 no.4
• /
• pp.83-92
• /
• 2010

The present study examined how listeners of Seoul Korean would recover deleted phonemes in consonant cluster simplification. In a phoneme monitoring experiment, listeners had to monitor for C2 (/k/ or /p/) in C1C2C3 when C2 was deleted (C1 was preserved) or preserved (C1 was deleted). The target consonant (C2) was either /k/ or /p/ (e.g., i$\b{lk}$-t${\partial}$lato vs. pa$\b{lp}$-t${\partial}$lato), and there were two listener groups, one group tested in 2002 and the other in 2009. Some points have emerged from the results. First, listeners were able to detect deleted phonemes as accurately and rapidly as preserved phonemes, showing that the physical presence of the acoustic information did not improve the listeners' performance. This suggests that listeners must have relied on language-specific phonological knowledge about the consonant cluster simplification, rather than relying on the low-level acoustic-phonetic information. Second, listener groups (participants in 2002 vs. 2009), differed in processing /p/ versus /k/: listeners in 2009 failed to detect /p/ more frequently than those in 2002, suggesting that the way the consonant cluster sequence is produced and perceived has changed over time. This result was interpreted as coming from statistical patterns of speech production in contemporary Seoul Korean as reported in a recent study by Cho & Kim (2009): /p/ is deleted far more often than /p/ is preserved, which is likely reflected in the way listeners process simplified variants. Finally, listeners processed /k/ more efficiently than /p/, especially when the target was physically present (in C-preserved condition), indicating that listeners benefited more from the presence of /k/ than of /p/. This was interpreted as supporting the view that velars are perceptually more robust than labials, which constrains shaping phonological patterns of the language. These results were then discussed in terms of their implications for theories of spoken word recognition.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.404-409
• /
• 2008

This paper consists largely of two parts: the first part introduces the revised railway human reliability analysis (R-HRA) method which is to be used under the railway risk assessment framework, and the second part presents the features of a computer software which was developed for aiding the R-HRA process. The revised R-HRA method supplements the original R-HRA method by providing a specific task analysis guideline and a classification of performance shaping factors (PSFs) to support a consistent analysis between analysts. The R-HRA software aids the analysts in gathering information for HRA, qualitative error prediction including identification of external error modes and internal error modes, quantification of human error probability, and reporting the overall analysis results. The revised R-HRA method and software are expected to support the analysts in an effective and efficient way in analysing human error potential in railway event or accident scenarios.

• Human Ecology Research
• /
• v.56 no.1
• /
• pp.33-54
• /
• 2018

This study devised an instruction that applies the content factors of Family Life Planning to backward design by exploring the fundamental concepts of backward design and the structure of developing a systematic instruction. Furthermore, it was conducted to improve the developed instruction by examining its validity with the help of experts and to find the method of applying it to the curriculum. The lesson design of this study was as follows. 1) Making a unit outline, 2) Identifying the expected results (Shaping the objectives), 3) Deciding acceptable evidence (Planning evaluation), 4) Making a detailed blueprint for class tasks, 5) Planning learning experience, 6) Making a learning experience plan per time, 7) Checking the lesson design. Second, experts participated in this study for the internal validity test about the process of the systematic lesson development of Family Life Design based on a backward design. The results were shown to be valid because the average was 3.7 out of a perfect score 4 and the CVI of all was over 0.9. The result of the IRA was also score 1, meaning that most of the experts agreed on the results of the test. The details of the lesson design were clear at every stage and the tasks and the results of each stage were specific. This study included most of the necessary stages for a backward design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.641-647
• /
• 2018

Recently, CCTV, which provides video information for multiple purposes, has been transformed into an intelligent, and the range of automation applications increased using the computer vision. A highly reliable detection method must be performed for accurate recognition of pedestrians and vehicles and various methods are being studied for this purpose. In such an object detection system. In this paper, we propose a method to detect a large number of pedestrians by acquiring three characteristic information that features of color information using HSI, motion vector information and shaping information using HOG feature information of a pedestrian in a situation where a large number of pedestrians are moving. The proposed method distinguishes each pedestrian while minimizing the failure or confusion of pedestrian detection and tracking. Also when pedestrians approach or overlap, pedestrians are identified and detected using stored frame feature data.