• 스마트미디어저널
• /
• 제12권4호
• /
• pp.47-57
• /
• 2023

육각 그리드(hexagonal grid) 구조는 지리정보시스템에서 공간정보 데이터를 처리하고 표현하기에 우수하여 많은 연구가 이루어지고 있다. 육각 그리드를 이용한 시각화는 다른 그리드 표현 방법 대비 시인성이 높지만, 이에 표현된 공간정보 데이터에 따라 양적 정보와 그리드 간 데이터 차이를 효과적으로 전달하는 데 어려움이 있다. 따라서, 본 연구에서는 육각 그리드 외곽에 그림자를 생성하여 시각적으로 육각 그리드를 강조하는 방법을 제안한다. 이를 위해 강조하고자 하는 육각 그리드들의 최외곽 선분들을 오프셋 시키고, 그 정보를 바탕으로 베지어 곡선을 생성하여 최종적인 그림자 형상을 결정한다. 그림자는 육각 그리드에서 멀어질수록 서서히 옅어진다는 특성을 활용하여, 그림자의 가장자리로 갈수록 투명도를 가변적으로 적용한다. 제안하는 방법을 이용하여 하나의 육각 그리드뿐만 아니라 여러 개의 육각 그리드가 주어지더라도 그림자 영역을 효과적으로 생성할 수 있음을 보였으며, 사용자 인터페이스의 입력에 따라 다양한 그림자 형상을 생성할 수 있다. 서울특별시의 행정구 중 용산구에 제안하는 방법을 활용하여 그림자를 생성한 후 시각적으로 강조한 결과를 보인다.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.9-14
• /
• 2023

In this study, an experiment was conducted to confirm the applicability of the external shape control of the ultrasonic knife to the CFRTP material, which is the base material of thermoplastic. TC910 based on polyamide6 (PA6) was used as the material. The slope 와 and tool transfer speed of the material and tool were selected as process factors for processing, and the following results were obtained. Under all cutting conditions using an ultrasonic knife, friction heat caused by high-frequency vibration was issued at 150℃ at the contact part between the material and the knife during cutting. As a result of the cutting force analysis, the faster the transfer speed, the higher the cutting force as the angle of entry of the blade increased, and the size of the cutting force changed during cutting. As for the size of the burr in accordance with the transfer speed condition, the smallest burr occurred at 150mm/min in the side part, and the smallest burr occurred at 150mm/min and 200mm/min in the case of the outlet burr. The size of the burr according to the entry angle tended to decrease as the tool entry angle increased, and the side part tended to increase as the tool entry angle increased. As a result of the cutting surface analysis, it was confirmed that the base material was eluted under all conditions, and the faster the transfer speed, the lower the elution phenomenon of the base material. Based on the above results, cutting the CFRTP material with an ultrasonic knife is possible, but the effect on heat generation caused by friction needs to be minimized, and further research needs to be conducted on this.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.164-171
• /
• 2022

The number of facilities using radiation generators increases and related regulations are strengthened, the establishment of a shielding management and evaluation technology has become important. The characteristics of the radiation generator used in previous report differ from those of currently available high-frequency radiation generators. This study aimed to manufacture lead, iron, and concrete shielding materials for the re-verification of half-value layers, tenth-value layers, and attenuation curve. For a comparison of attenuation ratio, iron, lead, and concrete shields were manufactured in this study. The initial dose was measured without shielding materials, and doses measured under different types and thicknesses of shielding material were compared with the initial dose to calculate the transmission rate on 50-300 kVp X-ray. All the three shielding materials showed a tendency to require greater shielding thickness for higher energy. The attenuation graph showed an exponential shape as the thickness decreased and a straight line as the thickness increased. The difference between the measurement results and the previous study, except in extrapolated parts, may be due to the differences in the radiation generation characteristics between the generators used in the two studies. The attenuated graph measured in this study better reflects the characteristics of current radiation generators, which would be more effective for shield designing.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.91-92
• /
• 2023

With the development of technology, interest in the implementation of free-form buildings is increasing, and research on producing free-form panels is being conducted accordingly. Since free-form buildings are curved and consist of geometric shapes, there are many problems with the production technology of free-form panels that implement them. Due to the inability to reuse molds, the cost of disposal of construction waste and waste of manpower for assembly increase the construction period and construction cost. To improve these limitations, a 3D printed concrete nozzle for FCP production was developed. However, this technology is not quantitatively extruded according to the shape of the panel, and there is a problem that residues are generated. Therefore, an free-form panel extrusion experiment was conducted to analyze the limitations of existing nozzles and to analyze the requirements for the development of new concrete extrusion nozzles. Existing nozzles were unable to be quantitatively extruded, resulting in errors. Due to the weak pressure of the screw and the inability to adjust the internal pressure, detailed extrusion speed control was impossible, and residue generation in the opening and closing device seemed to be the cause. Therefore, a pump capable of quantitative concrete pressure transfer and a pressure control device for easy extrusion of concrete are required. In addition, it is judged that it is necessary to develop an opening and closing device and an extrusion device that do not generate residues. The results of this study are expected to provide information for FCP production and production and to be a basic study of technologies necessary for the production of free-form building panels.

• 한국음향학회지
• /
• 제43권2호
• /
• pp.168-177
• /
• 2024

수중 압전 에너지 하베스터(Piezoelectric Energy Harvester, PEH) 설계시 곡률변화를 통해 외팔보형 전체의 와류유기진동(Vortex Induced Vibration, VIV)을 생성시키고, VIV의 생성으로 곡면형 외팔보 PEH에 진동 변위가 증가한다는 것은 실제 전력을 증대 시키는 데 중요한 요소이다. 해석 모델인 곡면형 PEH의 재질은 Polyvinyline Di-Floride(PVDF) 압전 필름으로서 곡률이 다양한 50 mm, 130 mm, 210 mm 모델에 유속은 0.1 m/s ~ 0.50 m/s로 정하여 VIV에 의한 PEH의 스트레인 에너지 변화를 관찰하였다. 곡률 반경이 작을수록 큰 폭의 VIV가 나타났고, 유속이 증가할수록 VIV가 많이 나타났다. 작은 곡률로 인한 급격한 형상변환이 VIV의 생성에 효과적이었고 스트레인 에너지, 정규화 발생 전압, 평균 전력 등은 곡률이 증가할수록 감소하였다. PEH 자체의 전력량을 증대시키기 위해 급한경사의 곡률 개선뿐만 아니라 곡률형 PEH의 개수가 늘어남에 따라 평균 전력도 상승할 것으로 사료된다.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.99-109
• /
• 2024

This study aimed to assess the satisfaction levels of adolescents with beauty programs, investigate the factors influencing them, and present foundational insights for designing cosmetics and beauty education initiatives tailored to adolescents. Specifically focusing on the "Safety and Use Education for Youth Cosmetics" program implemented in Gwangju Metropolitan City, it examined the satisfaction of participants, including students, instructors, and school teachers involved in the education. The study was based on action research, a qualitative methodology. The conclusions are as follows: First, participants gained knowledge and information encompassing various aspects of cosmetics, such as types, expiration dates and usage span, face wash and skin types, shampooing methods, scalp care, role and significance of sunscreen, skin trouble management, and identification of skin type, through cosmetic education programs. Second, participants learned about techniques such as eyebrow trimming, eyebrow shape correction, facial contour correction, skin blush supplementation, color makeup, personal color, and tattooing. Third, there is an urgent need to develop different educational teaching resources suitable for implementation across elementary, middle, and high schools. Fourth, it is necessary to cultivate higher-quality instructors in this digital age. Fifth, it is crucial to explore new methods of delivering beauty education to adolescents. We hope the insights gleaned from this study will serve as useful foundational data, albeit modest, fostering new beauty trends amidst the challenging landscape of youth education.

• 헤리티지:역사와 과학
• /
• 제51권1호
• /
• pp.48-65
• /
• 2018

1874년 박규현이 기술한 '파산서당기'를 중심으로 분석한 파산서당의 영건과정과 조경식물의 변화상을 추적한 연구결과는 다음과 같다. 첫째, 대구 달성의 하빈면 묘리 파회에 자리한 살림집 삼가헌과 별당(파산서당)은 사육신 박팽년(1417~1456)의 11대손 박성수로부터 14대손 박규현에 이르기 까지 약 90년간(1783~1874)에 걸쳐 완성되었는데, 풍수적 회룡고미형(回龍顧尾形)으로 회자되는 길처이다. 둘째, 파회마을은 박성수가 1769년(영조 45)에 벗들과 교우하기 위해 초가를 짓고 자신의 호(삼가헌(三可軒))를 당호로 삼은 것으로부터 유래하는데, 둘째아들 박광석이 분가(1783)한 후 사랑채(1826)와 안채(1869)를 지었고, 박광석의 손자 박규현이 1874년에 연을 심어 가꾼 연못과 정자(하엽정)를 추가했으며, 파산서당 명칭은 삼가헌 뒷동산 지명과 연계된다. 셋째, 네모꼴 연못은 길이 21m, 너비 15m 규모로 연꽃을 심었는데, 못 가운데 원형 섬을 두어 조선시대의 보편적인 성리학적 세계관을 반영하고 있다. 파산서당에 부가된 정자(하엽정)의 명칭, 동쪽 방 이연헌(怡燕軒), 서쪽 방 몽양재(蒙養齋) 등은 군자적 삶의 염원, 그리고 자손들의 밝은 미래를 염원하는 뜻을 담았다. 넷째, 성리학적 규범(소나무, 연꽃, 대나무), 안빈낙도의 생활철학(버드나무), 은일사상과 태평성대의 염원(대나무), 그리고 구휼목적과 실용성(밤나무, 상수리나무, 가래나무, 옻나무 등)에 비중을 둔 식재수종의 반영을 추적할 수 있는데, 이는 서당이라고 하는 장소성과 상징성, 절제미학 등을 고려한 조경법이라 하겠다. 다섯째, 조영초기 식재수종은 회화나무와 연꽃을 제외하고 대부분 고사하여 다른 수종으로 대체되었는데, 서당 기능의 상실과 풍수적 가치(홍동백서 상징수종), 벽사기능(엄나무와 탱자나무), 심미성 및 실용적 가치(해당화, 매화, 배나무, 복숭아나무, 굴참나무), 가문의 번영과 변화지 않는 청백의 삶(자귀나무, 배롱나무, 주목), 심미관 등 후손들의 확장된 작정관을 보여주는 사례이다.

• 지역사회간호학회지
• /
• 제14권2호
• /
• pp.263-273
• /
• 2003

Objectives: The purpose of this study was to identify the family phenomenon and characteristics by ICNP such as family shape, life standard. area, and development stage. Method: 1. Sample size was 115. 2. Data analysis method included frequency analysis including ratio. Results: 1. On the distribution of the family phenomena by family shape, the nuclear family showed a higher ratio on the distribution in family communication and the unhealthy life style. The nuclear family was related to children andhad a higher ratio on the inadequate care management of the sick member. The extended family showed the highest ratio on the inadequate care management of sick member. 2. On the distribution of the family phenomena by family life standard, the family with medium life standard showed a higher ratio on the inappropriate family coping, whereas the family with lower life standard appeared to have a higher ratio on the inadequate care management of the sick member. 3. On the distribution of the family phenomena by area. the large city area showed the highest ratio on the inappropriate family coping, the medium and small city area appeared to have the highest ratio on the unhealthy life style. The county area showed the highest ratio on the inadequate care management of sick member. 4. On the distribution of the family phenomena by development stage, the family in rearing period showed a higher ratio on the inappropriate family coping and the lack of family intimacy. Families with preschool children showed a higher ratio on the unhealthy life style, and families with school age children showed the highest ratio on the inappropriate family coping. Families with adolescents appeared to have the highest ratio on the disturbance in family communication, and families with launching young adults showed the highest ratio on the inadequate care management of sick member. 5. On the distribution of the family characteristics by family shape, the nuclear family showed a higher ratio on the family characteristics such as less communication chances among family members and neglect of general child rearing, whereas the third generation family appeared to have a higher ratio on the characteristics such as overburden of housewife's role and short of caring among family members. 6. On the distribution of the family characteristics by family life standard, the family of medium life standard showed higher ratio on the family characteristics such as a few communication chance among family and overburden of housewife's role, and the family of lower life standard appeared to higher ratio on the family characteristics such as short of caring among family members. 7. On the distribution of the family characteristics by area. the large city area showed a higher ratio on the family characteristics such as overburden of housewife's role and neglect of general child rearing. The medium and small city area appeared to have a higher ratio on the family characteristics such as less communication chancec among family members. The county area showed a higher ratio on the family characteristics such as short-term care among family members. 8. On the distribution of the family characteristics by development stage, the family with rearing period showed a higher ratio on the family characteristics such as neglect of general child rearing. Families with preschool children showed a higher ratio on the family characteristics such as less communication chancec among family members. Families with school age children showed a higher ratio on the family characteristics such as overburden of housewife's role. Families with adolescents appeared to have a higher ratio on the family characteristics such as less communication chances among family members. Families with launching young adults showed a higher ratio on the family characteristics such as less communication chances and short-term care among family members.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.645-651
• /
• 2007

일반적으로 수치지도의 등고선은 항공사진을 해석 및 수치 도화기 상에서 입체시 하여 동일한 높이의 점들을 3차원으로 측정하고 도화하여 생성되므로 등고선 도화는 작업량이 많고 도화사의 주관적인 판단과 경험에 의해 결정된다. 그러므로 지형의 형태와 특성을 묘사하는 등고선의 도화는 도화사의 풍부한 경험이 요구된다. 또한 국내의 수치지도는 수치지형모델(DTM) 데이터를 포함하고 있지 않으므로 DTM이 필요한 경우 대부분 등고선 데이터로부터 간접적으로 생성한다. 본 연구에서는 지형의 특성에 대한 중요한 정보를 포함하고 있는 model key point를 등고선에서 추출하고, 이를 기반으로 지형적 특성을 고려하여 DTM의 격자간격을 효율적이고 융통적으로 조절하여 정량적 및 정성적인 측면에서 최적의 데이터를 이용하여 DTM을 생성하는 방법을 제안한다. 이를 위하여 progressive sampling 기법을 적용하여 지형이 복잡하여 기복이 큰 산악지역에는 격자간격을 작게하고 지형이 완만한 지역은 격자간격을 상대적으로 크게한다. 그러므로 고정된 하나의 격자간격을 사용하지 않고 지역별로 서로 다른 격자간격을 가지는 다중격자 DTM을 생성하였다. 다중격자 DTM은 용량이 최적화되어 계산량이 적고, 신속한 디스플레이 할 수 있는 장점이 있다.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.139-146
• /
• 2004

본 논문에서는 솔더페이스트의 이차원 및 삼차원 자동검사를 함께 할 수 있는 복합 검사 광학계와 그 구동유닛을 단일 프로브 시스템으로 구현하고, 그를 위한 효과적인 비젼검사 알고리즘을 제안하였다. 솔더페이스트의 이차원 검사에는 One-pass Run Length 레이블링 알고리즘을 제안하여 입력 영상으로부터 솔더 페이스트 형상을 효과적으로 추출하도록 하였고, 고속 검사를 위한 프로브의 최적 이동 경로도 구하였으며, 삼차원 검사에는 기존의 레이져 슬릿빔(slit-beam) 방식 대신 격자 투영식 모아레 간섭계에 기반한 위상이동 알고리즘을 도입하여 고정밀 검사가 가능토록 하였다. 전체 소프트웨어 구현에는 MMX 병렬처리기법도 적용함으로써 더욱 고속화 하였다. 10㎜×10㎜의 단위 측정영역(field of view: FOV)에 대하여 x, y 축으로 10㎛ Z축으로 l ㎛의 분해능을 가지는 이차원 및 삼차원 복합 광학 검사 시스템을 제작하여 실험한 결과, 한 FOV에 대한 솔더페이스트의 이차원 및 삼차원 검사를 영상포착 후 각각 평균 11msec와 15msec의 짧은 시간에 처리할 수 있었고, ±1㎛의 두께 측정 정밀도를 얻을 수 있었다.