• International Journal of Oral Biology
• /
• v.48 no.4
• /
• pp.33-44
• /
• 2023

In this review, the regulatory mechanisms of autophagy were described, and its interaction with apoptosis was identified. The role of autophagy in embryogenesis, tooth development, and cell differentiation were also investigated. Autophagy is regulated by various autophagy-related genes and those related to stress response. Highly active autophagy occurrences have been reported during cell differentiation before implantation after fertilization. Autophagy is involved in energy generation and supplies nutrients during early birth, essential to compensate for their deficient supply from the placenta. The contribution of autophagy during tooth development, such as the shape of the crown and root formation, ivory, and homeostasis in cells, was also observed. Genes control autophagy, and studying the role of autophagy in cell differentiation and development was useful for understanding human aging, illness, and health. In the future, the role of specific mechanisms in the development and differentiation of autophagy may increase the understanding of the pathological mechanisms of disease and development processes and is expected to reduce the treatment of various diseases by modulating the autophagic phenomenon.

• Journal of Information Processing Systems
• /
• v.20 no.1
• /
• pp.85-92
• /
• 2024

In recent years, Bitcoin and Ethereum have witnessed a surge in trading activity, driven by venture capital investment and funding through initial coin offerings (ICOs) and initial exchange offerings (IEOs). This heightened interest has led to kickstarting a vibrant ecosystem for blockchain development. The total number of cryptocurrencies listed on CoinMarketCap.com has reached 2,274 highlights how dynamic and wide blockchain development landscape has grown. In blockchain development, new blockchain projects are being created by forking blockchains inspired by major cryptocurrencies such as Bitcoin and Ethereum. These projects aim to address the perceived shortcomings and improve existing technologies. Altcoins, representing these alternative cryptocurrencies, are an ongoing industry effort to improve performance and security with enhancement proposals such as Bitcoin Improvement Proposals (BIP), Ethereum Improvement Proposals (EIP), and EOSIO Enhancement Proposals (EEP). With competitive attempts to improve blockchain performance and security, an ongoing performance race between various blockchains has taken shape, each claiming its own performance advantages. In this paper, we describe the transactions contained in the blocks of each representative blockchain, and find the factors that affect the transactions per second (TPS) through transaction processing and block generation processes, and suggest their relationship with scalability.

• Journal of Animal Science and Technology
• /
• v.66 no.1
• /
• pp.219-231
• /
• 2024

Feed has a great influence on the composition of swine manure, which is the principal cause of odor. Therefore, the purpose of this study is to simply change the shape of pig feed and control calories to find a suitable feed form for reducing the smell of swine manure. The experiment was conducted on 15 pigs from July to August 2021, and a total of three measurements were done. Three types of feed were evaluated in this study. The analysis items related to odor of swine manure are complex odor, ammonia, sulfur-based odors, and volatile organic compounds (VOCs). In the case of complex odor, dilution multiples tended to decrease over time, except for type A feed. The concentration of ammonia in all types of feed decreased over time. Most sulfur-based odorous substances except hydrogen sulfide at the first measurement were not detected. Representatively, Decane, 2,6-Dimethylnonane, and 1-Methyl-3-propylcycolhexane were detected in VOCs generated from swine manure. The major odorous substansces in swine manure have changed from ammonia and sulfur compounds to VOCs. In order to reduce the odor caused by swine manure, it is ad-vantageous to use low-calorie feed consisting of pellet-type.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2015

This study analyzed the coat color-related genes of MC1R, ASIP, ECA3-inversion, and STX17 of 1,462 Jeju horses administered by the Jeju Special Self-Governing Province. This was done to investigate the distributional characteristics of coat color-related genes in the Jeju horse group and the changes of its coat color-related genes by generation. The genotype frequency of the MC1R gene of $E^+/E^+$ and $E^+/E^e$ related to black coat color was 0.122 and 0.447, respectively, while $E^e/E^e$ of the chestnut genotype was 0.429. The genotype frequency of the ASIP gene of $A^A/A^A$, $A^A/A^a$, and $A^a/A^a$ was 0.46, 0.448, and 0.091, respectively, where the genotype frequency of $A^a/A^a$ turned out to be relatively low. The To/To and +/To genotype that manifests the Tobiano shape was 0.001 and 0.119, respectively, with the share of Tobiano shape around 12%. The genotype frequency of G/G and G/g of STX17 related to grey coat color was 0.002 and 0.680, respectively, with the share of grey horses among the Jeju horse group at 68.2%. As for the change of coat color genes by generation, no large changes were observed in the MC1R and ASIP genes. In ECA3-inversion, the To allele that manifests Tobiano significantly decreased following the generational change (p<0.05), while the STX17 G allele related to grey coat color significantly increased following the generational change (p<0.05). It will be necessary to examine the coat color genes when selecting breeding horses so that the diversity of coat colors among the Jeju horse group can be maintained.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.143-152
• /
• 2019

This paper presents two new techniques for solving the two problems of the water curtain: 'shape distortion' caused by gravity and 'resolution degradation' caused by fine satellite droplets around the shape. In the first method, when the user converts a three-dimensional model to a vertical sequence of slices, the slices are evenly spaced. The method is to adjust the time points at which the equi-distance slices are created by the nozzle array. In this method, even if the velocity of a water drop increases with time by gravity, the water drop slices maintain the equal interval at the moment of forming the whole shape, thereby preventing distortion. The second method is called the minimum time interval technique. The minimum time interval is the time between the open command of a nozzle and the next open command of the nozzle, so that consecutive water drops are clearly created without satellite drops. When the user converts a three-dimensional model to a sequence of slices, the slices are defined as close as possible, not evenly spaced, considering the minimum time interval of consecutive drops. The slices are arranged in short intervals in the top area of the shape, and the slices are arranged in long intervals in the bottom area of the shape. The minimum time interval is pre-determined by an experiment, and consists of the time from the open command of the nozzle to the time at which the nozzle is fully open, and the time in which the fully open state is maintained, and the time from the close command to the time at which the nozzle is fully closed. The second method produces water drop sculptures with higher resolution than does the first method.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.128-137
• /
• 2019

A lithium is the lightest metal on the earth. It has some attractive characteristics as a negative electrode material such as a low reduction potential (-3.04 V vs. SHE) and a high theoretical capacity ($3,860mAh\;g^{-1}$). Therefore, it has been studied as a next generation anode material for high energy lithium batteries. The thin lithium electrode is required to maximize the efficiency and energy density of the battery, but the physical roll-press method has a limitation in manufacturing thin lithium. In this study, thin lithium electrode was fabricated by electrodeposition under various conditions such as compositions of electrolytes and the current density. Deposited lithium showed strong relationship between process condition and its characteristics. The concentration of electrolyte affects to the shape of deposited lithium particle. As the concentration increases, the shape of particle changes from a sharp edged long one to a rounded lump. The former shape is favorable for suppressing dendrite formation and the elec-trode shows good stripping efficiency of 92.68% (3M LiFSI in DME, $0.4mA\;cm^{-2}$). The shape of deposited particle also affected by the applied current density. When the amount of current applied gets larger the shape changes to the sharp edged long one like the case of the low concentration electrolyte. The combination of salts and solvents, 1.5M LiFSI + 1.5M LiTFSI in DME : DOL [1 : 1 vol%] (Du-Co), was applied to the electrolyte for the lithium deposition. The lithium electrode obtained from this electrolyte composition shows the best stripping efficiency (97.26%) and the stable reversibility. This is presumed to be due to the stability of the surface film induced by the Li-F component and the DOL effect of providing film flexibility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.147-154
• /
• 2018

This paper focuses on the development of a support system that can rapidly generate the design data of a hot-form die with cooling channels, commonly known as hot stamping technology. We propose a new process for designing hot-form dies based on our (automated) system, whose main features are derived from the analysis of the design requirements and design process in the current industry. Our design support system consists of two modules, which allow for the generation of a 3D geometry model and its 2D drawings. The module for 3D modeling automation is implemented as a type of CATIA template model based on CATIA V5 Knowledgeware. This module automatically creates a 3D model of a hot-form die, including the cooling channels, that depends on the shape of the forming surface and the number of STEELs (subsets of die product) and cooling channels. It also allows for both the editing of the positions and orientations of the cooling channels and testing for the purpose of satisfying the constraints on the distance between the forming surface and cooling channels. Another module for the auto-generation of the 2D drawings is being developed as a plug-in using CAA (CATIA SDK) and Visual C++. Our system was evaluated using the S/W test based on a user defined scenario. As a result, it was shown that it can generate a 3D model of a hot form die and its 2D drawings with hole tables about 29 times faster than the conventional manual method without any design errors.

• Composites Research
• /
• v.30 no.3
• /
• pp.181-187
• /
• 2017

The effect of nanoscopic and microscopic Fe, $Fe_3O_4$, and Ni particles and their shapes and substrate materials on the heating behavior of thermoplastic polyurethane (TPU) adhesive films was investigated via induction heating. The heat generation tendency of $Fe_3O_4$ particles was higher than that shown by Fe and Ni particles in the TPU adhesive films. When the Fe and Ni particle size was larger than the penetration skin depth, the initial heating rate and maximum temperature increased with an increase in the particle size. This is attributed to the eddy current heat loss. The heating behavior of the TPU films with Ni particles of different shapes was examined, and different hysteresis heat losses were observed depending on the particle shape. Consequently, the flake-shaped Ni particles showed the most favorable heat generation because of the largest hysteresis loss. The substrate materials also affected the heating behavior of the TPU adhesive films in an induction heating system, and the thermal conductivity of the substrate materials was determined to be the main factor affecting the heating behavior.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.49-53
• /
• 2018

Since various methods to form well-aligned nano-/micro- patterns are underlying technologies to fabricate next generation wearable electronic devices, many efforts have been made to realize finer patterns in recent years. Among lots of patterning methods, the present invention includes a nano-transfer printing (n-TP) process which is advantageous in that a processing cost is low and high-resolution patterns can be formed within a short processing time. We successfully achieved pattern formation of highly ordered Pt lines with line-width of 250 nm, 500 nm, and $1{\mu}m$ on transparent and flexible substrates. In addition, we analyzed the durability of the patterns, showing excellent stability of line-shape even after a physical and repeated bending test of 500 times using a bending machine. As a result, it is expected that a n-TP process is very useful for forming various metal patterns, and it is also expected to be applied to wiring and interconnection technology of next generation flexible electronic devices.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.139-150
• /
• 2006

A schematic map is a special purpose map which is generated to recognize it's objects easily and conveniently via simplifying and highlighting logical geometric information of a map. To manufacture the schematic map with road, label and icon, we must generate simplified route map and replace many geometric objects. Performing a give task, however, there are an amount of overlap areas between geometric objects whenever we process the replacement of geometry objects. Therefore we need replacing geometric objects without overlap. But this work requires much computational resources, because of the high complexity of the original geometry map. We propose the schematic map generation system whose map consists of icons and label. The proposed system has following steps: 1) eliminating kinks that are least relevant to the shape of polygonal curve using DCE(Discrete Curve Evolution) method. 2) making an evenly distributed route using CVT(Centroidal Voronoi Tessellation) and Grid snapping method. Therefore we can keep the structural information of the route map from CVT method. 3) replacing an icon and label information with collision avoidance algorithm. As a result, we can replace the vertices with a uniform distance and guarantee the available spaces for the replacement of icons and labels. We can also minimize the overlap between icons and labels and obtain more schematized map.