• The KIPS Transactions:PartB
• /
• v.14B no.4
• /
• pp.263-272
• /
• 2007

This paper proposes a skeleton-based hierarchical shape description scheme, called a skeleton tree, for accurate shape-based image retrieval. A skeleton tree represents an object shape as a hierarchical tree where high-level nodes describe parts of coarse trunk regions and low-level nodes describe fine details of boundary regions. Each node refines the shape of its parent node. Most of the noise disturbances are limited to bottom level nodes and the boundary noise is reduced by decreasing weights on the bottom levels. The similarity of two skeleton trees is computed by considering the best match of a skeleton tree to a sub-tree of another skeleton tree. The proposed method uses a hybrid similarity measure by employing both Fourier descriptors and moment invariants in computing the similarity of two skeleton trees. Several experimental results are presented demonstrating the validity of the skeleton tree scheme for the shape description and indexing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.166-169
• /
• 2017

Currently, studies using Deep Learning are actively carried out showing good results in many fields. A template matching method is mainly used to recognize parts mounted on PCB(Printed Circuit Board). However, template matching should have multiple templates depending on the shape, orientation and brightness. And it takes long time to perform matching because it searches for the entire image. And there is also a disadvantage that the recognition rate is considerably low. In this paper, we use the Faster-RCNN method for recognizing PCB components as machine learning for classifying several objects in one image. This method performs better than the template matching method, execution time and recognition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1231-1236
• /
• 2006

The contrast control of images with narrow dynamic range is a simple method among enhancement methods for low intensity of image. Histogram equalization is the most common method for this purpose, which stretches the dynamic range of intensity Conventional methods would fail to enhance images with extremely dark and bright regions, because of not considering the shape of histogram. In this paper, we propose a novel adaptive histogram equalization based on histogram matching with multiple Gaussian transformation function. As a result, output images with a couple of peaks of histogram could be improved and the details such as edges in dark regions could be appeared better than conventional method subjectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.337-346
• /
• 2022

This paper addresses the problem of vision-based ear loops ansd attachment inspection in mask production lines. This paper focuses on connections with ear loops and mask filter by an efficient combined approach. The proposed method used a template matching, shape detection and summation of histogram with preprocessing. We had a parameter for detecting defects heuristically. If the shape vertices are lower than the parameters our proposed method will find defective mask automatically. After finding normal masks in mask ear loops attachment status inspection algorithm our proposed method conducts attachment amount inspection. Our experimental results showed that the precision is 1 and the recall is 0.99 in the mask attachment status inspection and attachment amount inspection.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.357-368
• /
• 2003

Evaluation of shape similarity for 3D models is essential in many areas - medicine, mechanical engineering, molecular biology, etc. Moreover, as 3D models are commonly used on the Web, many researches have been made on the classification and retrieval of 3D models. In this paper, we describe methods for 3D shape representation and major concepts of similarity evaluation, and analyze the key features of recent researches for shape comparison after classifying them into four categories including multi-resolution, topology, 2D image, and statistics based methods. In addition, we evaluated the performance of the reviewed methods by the selected criteria such as uniqueness, robustness, invariance, multi-resolution, efficiency, and comparison scope. Multi-resolution based methods have resulted in decreased computation time for comparison and increased preprocessing time. The methods using geometric and topological information were able to compare more various types of models and were robust to partial shape comparison. 2D image based methods incurred overheads in time and space complexity. Statistics based methods allowed for shape comparison without pose-normalization and showed robustness against affine transformations and noise.

• Korean Journal of Remote Sensing
• /
• v.20 no.5
• /
• pp.289-305
• /
• 2004

Atmospheric correction of Landsat Visible and Near Infrared imagery (VIS/NIR) over aquatic environment is more demanding than over land because the signal from the water column is small and it carries immense information about biogeochemical variables in the ocean. This paper introduces two methods, a modified dark-pixel substraction technique (path--extraction) and our spectral shape matching method (SSMM), for the correction of the atmospheric effects in the Landsat VIS/NIR imagery in relation to the retrieval of meaningful information about the ocean color, especially from Case-2 waters (Morel and Prieur, 1977) around Korean peninsula. The results of these methods are compared with the classical atmospheric correction approaches based on the 6S radiative transfer model and standard SeaWiFS atmospheric algorithm. The atmospheric correction scheme using 6S radiative transfer code assumes a standard atmosphere with constant aerosol loading and a uniform, Lambertian surface, while the path-extraction assumes that the total radiance (L/sub TOA/) of a pixel of the black ocean (referred by Antoine and Morel, 1999) in a given image is considered as the path signal, which remains constant over, at least, the sub scene of Landsat VIS/NIR imagery. The assumption of SSMM is nearly similar, but it extracts the path signal from the L/sub TOA/ by matching-up the in-situ data of water-leaving radiance, for typical clear and turbid waters, and extrapolate it to be the spatially homogeneous contribution of the scattered signal after complex interaction of light with atmospheric aerosols and Raleigh particles, and direct reflection of light on the sea surface. The overall shape and magnitude of radiance or reflectance spectra of the atmospherically corrected Landsat VIS/NIR imagery by SSMM appears to have good agreement with the in-situ spectra collected for clear and turbid waters, while path-extraction over turbid waters though often reproduces in-situ spectra, but yields significant errors for clear waters due to the invalid assumption of zero water-leaving radiance for the black ocean pixels. Because of the standard atmosphere with constant aerosols and models adopted in 6S radiative transfer code, a large error is possible between the retrieved and in-situ spectra. The efficiency of spectral shape matching has also been explored, using SeaWiFS imagery for turbid waters and compared with that of the standard SeaWiFS atmospheric correction algorithm, which falls in highly turbid waters, due to the assumption that values of water-leaving radiance in the two NIR bands are negligible to enable retrieval of aerosol reflectance in the correction of ocean color imagery. Validation suggests that accurate the retrieval of water-leaving radiance is not feasible with the invalid assumption of the classical algorithms, but is feasible with SSMM.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.27-40
• /
• 2006

The exchange of parameterized feature-based CAD models is important for product data sharing among different organizations and automation systems. The role of feature-based modeling is to gonerate the shape of product and capture design intends In a CAD system. A feature is generated by referring to topological entities in a solid. Identifying referenced topological entities of a feature is essential for exchanging feature-based CAD models through a neutral format. If the CAD data contains the modification history in addition to the construction history, a matching mechanism is also required to find the same entity in the new model (post-edit model) corresponding to the entity in the old model (preedit model). This problem is known as the persistent naming problem. There are additional problems arising from the exchange of parameterized feature-based CAD models. Authors have analyzed previous studies with regard to persistent naming and characteristics for the exchange of parameterized feature-based CAD models, and propose a solution to the persistent naming problem. This solution is comprised of two parts: (a) naming of topological entities based on the object spore information (OSI) and secondary name (SN); and (b) name matching under the proposed naming.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.6
• /
• pp.363-368
• /
• 2016

Rectangular shape detection plays an important role in many image recognition systems. However, it requires continued research for its improved performance. In this study, we propose a strong rectangular shape detection algorithm, which combines the canny edge and line detection algorithms based on the perpendicularity and parallelism of a rectangle. First, we use the canny edge detection algorithm in order to obtain an image edge map. We then find the edge of the contour by using the connected component and find each edge contour from the edge map by using a DP (douglas-peucker) algorithm, and convert the contour into a polyline segment by using a DP algorithm. Each of the segments is compared with each other to calculate parallelism, whether or not the segment intersects the perpendicularity intersecting corner necessary to detect the rectangular shape. Using the perpendicularity and the parallelism, the four best line segments are selected and whether a determined the rectangular shape about the combination. According to the result of the experiment, the proposed rectangular shape detection algorithm strongly showed the size, location, direction, and color of the various objects. In addition, the proposed algorithm is applied to the license plate detecting and it wants to show the strength of the results.

• Smart Structures and Systems
• /
• v.7 no.5
• /
• pp.417-432
• /
• 2011

The present paper is devoted to vibration canceling and shape control of piezoelastic slender beams. Taking into account the presence of electric networks, an extended electromechanically coupled Bernoulli-Euler beam theory for passive piezoelectric composite structures is shortly introduced in the first part of our contribution. The second part of the paper deals with the concept of passive shape control of beams using shaped piezoelectric layers and tuned inductive networks. It is shown that an impedance matching and a shaping condition must be fulfilled in order to perfectly cancel vibrations due to an arbitrary harmonic load for a specific frequency. As a main result of the present paper, the correctness of the theory of passive shape control is demonstrated for a harmonically excited piezoelelastic cantilever by a finite element calculation based on one-dimensional Bernoulli-Euler beam elements, as well as by the commercial finite element code of ANSYS using three-dimensional solid elements. Finally, an outlook for the practical importance of the passive shape control concept is given: It is shown that harmonic vibrations of a beam with properly shaped layers according to the presented passive shape control theory, which are attached to an resistor-inductive circuit (RL-circuit), can be significantly reduced over a large frequency range compared to a beam with uniformly distributed piezoelectric layers.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.103-111
• /
• 2011

In this paper, we propose a Geometrical Centroid Contour Distance(GCCD) which is described by shape signature based on contour sequence. The proposed method uses geomertrical relation features instead of the absolute angle based features after it was normalized and aligned with dominant feature of the shape. Experimental result with MPEG-7 CE-Shape-1 Data Set reveals that our method has low time/spatial complexity and scale/rotation robustness than the other methods, showing that the precision of our method is more accurate than the conventional desctiptors. However, performance of the GCCD is limited with concave and complex shaped objects.