• Elastomers and Composites
• /
• 제49권3호
• /
• pp.220-224
• /
• 2014

자동차 타이어의 트레드는 노면과 직접적으로 접촉하며 제동력, 구동력, 소음 등 중요한 역할을 한다. 트레드는 많은 그루브로 이루어져 있는데 고무의 형상을 형성하는 가류 공정에서 불량이 발생하게 되면 트레드의 기능이 저하되어 자동차 성능의 문제로 이어지게 된다. 본 논문은 CAE 해석을 통하여 가류 공정 중 구체적인 고무의 흐름을 분석하였다. 트레드 형상에 따라 고무 흐름의 편차가 발생하기 때문에 형상에 따른 트레드의 고무가 금형에 접촉되는 순서와 속도 그리고 고무의 흐름을 관찰하였다. 트레드의 형상에 따라서 고무가 금형에 안착되는 양상이 다르게 나타났으며 고무의 흐름에 큰 변화를 주는 것을 확인할 수 있었다.

• 한국가스학회지
• /
• 제16권3호
• /
• pp.65-70
• /
• 2012

폭발챔버에서 water gel barrier의 표면형상의 크기에 따른 폭발거동 특성을 조사하기 위하여 실험적 연구를 수행하였다. 단면적 $100{\times}100\;mm^2$, 길이 1600 mm를 가지는 폭발챔버 그리고 점화원으로부터 각각 300 mm, 700 mm 및 1100 mm 떨어진 챔버 바닥면에 $100{\times}200\;mm^2$의 크기에 서로 다른 크기의 표면형상을 고려한 gel barrier를 설치할 수 있도록 제작하였다. 젤라틴 gel과 물을 혼합하여 4가지 크기의 표면형상을 가지는 water gel barrier를 제조하여 실험변수로 사용하였다. 폭발과정 동안 화염전파 과정을 가시화하기 위해 고속카메라 그리고 폭발압력 변화를 관찰하고자 압력획득시스템을 사용하였다. 실험결과, gel barrier의 표면형상의 크기가 커질수록 화염전파과정 및 최대 폭발압력 도달시간은 빠르게 진행되는 것으로 나타났으며, 화염속도 및 폭발압력 또한 증가하는 경향으로 나타났다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.117-120
• /
• 2002

In this paper, several methods to predict the solder joint shape are studied. Although there are various methods to predict the solder joint shape, such as truncated sphere method, force-bal tranced analytical solution, and energy-based methods like surface evolver developed by Ken Brakke, we calculate solder joint shape of $\mu$BGA by two solder joint shape prediction methods(truncated sphere method and surface evolver) and then compare results of each method. The results in dicate that two methods can accurately predict the solder joint shape in an accurate range. After that, we calculate reliability solder joint shape under thermal cycle test by FEA program ANSYS. As a result, it could be found that optimal solder joint shape calculated by solder joint prediction method has best reliability in thermal cycle test.

• 한국CDE학회논문집
• /
• 제14권2호
• /
• pp.129-136
• /
• 2009

Generally, curved surfaces of ship hull are deformed by flame bending (line heating), multi-press forming, and die-less forming method. The forming methods generate the required in-plane/bending strain or displacement on the flat plate to make the curved surface. Multi-press forming imposes the forced displacements on the flat plate by controlling the position of each pressing points based upon the shape difference between the unfolded flat plate and the curved object shape. The flat plate has been obtained from the unfolding system that is independent of the ship CAD. Apparently, the curved surface and the unfolded-flat surface are expressed by different coordinate systems. Therefore, one of the issues is to find a registration of the unfolded surface and the curved shape for the purpose of minimum amount of forming works by comparing the two surfaces. This paper presents an efficient algorithm to get an optimized registration of two different surfaces in the multi-press forming of ship hull plate forming. The algorithm is based upon the ICP (Iterative Closest Point) algorithm. The algorithm consists of two iterative procedures including a transformation matrix and the closest points to minimize the distance between the unfolded surface and curved surfaces. Thereby the algorithm allows the minimized forming works in ship-hull forming.

• 대한기계학회논문집B
• /
• 제29권5호
• /
• pp.625-632
• /
• 2005

This paper describes the shape optimization of a stator blade in a single-stage transonic axial compressor. The blade optimization has been performed using response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the stator blade, which are used to define a stacking line, are introduced to increase an adiabatic efficiency. Data points for response evaluations have been selected by D-optimal design, and linear programming method has been used for an optimization on a response surface. Throughout the shape optimization of a stator blade, the adiabatic efficiency is increased to 5.8 percent compared to that of the reference shape of the stator. The increase of the efficiency is mainly caused by the pressure enhancement in the stator blade. Flow separation on the blade suction surface of the stator is also improved by optimizing the stator blade. It is noted that the optimization of the stator blade is also useful method to increase the adiabatic efficiency in the axial compressor as well as the optimization of a rotor blade, which is widely used now.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.48-54
• /
• 2004

This paper describes the development of automatic shape design program for spur gear. It produces automatically third-dimensional surface and solid model used in CAD/CAM system with inputting simple measurements. This program can maximize user's convenience and get surface and solid model quickly as accepting GUI(graphic user interface). Automatic shape design program for spur gear was developed by Visual LISP, a developer program. Besides, a geometrical method and a mathematical algerian are used in this program. Use frequency of a fine spur gear is on the increase recently and manufacture process of this gear is heat treatment after press processing with molding. In this press processing, the upper punch portion of a fine spur gear shape is drafted by CAM. Therefore, estimated that surface and solid model of spur gear used to CAM are needed in this research. In this research, after 2 ㎜ gear was modeled by auto shape design program, the upper punch portion of a fine spur gear was manufactured as giving third-dimensional model to CAM software and then, displayed the result as applying to press process.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.881-886
• /
• 2009

Research into the replacement of injured systems and tissue in the human body is advancing rapidly. Recently, Ti-Ni shape memory alloys have shown excellent biofunctionality related to their shape memory effect and superelasticity. In this study, the effect of an acid or an alkali treatment on the bioactivity in 49Ti-Ni and 51.5Ti-48.5Ni alloys is investigated in an effort to utilize Ti-Ni alloy as a biomaterial. In addition, the biocompatibility in a SBF solution is assessed through in vitro testing. A porous surface was formed on the surface of both alloys after a chemical treatment. According to the in vitro test, apatite formed on the surfaces of both alloys. The forming rate of apatite in the Ti-rich alloy was faster that in the Ni-rich alloy. The formation of apatite provided proof of the bioactivity of the Ti-Ni alloy. A small quantity of Ni was eluted at the initial stage, whereas Ni was not found for 12 days in the Ti-rich alloy and for 8 days in the Ni-rich alloy. In the case of the treated 51.5Ti-Ni alloy, the shape memory property was worsened but the biocompatibility was improved.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.66-73
• /
• 2011

This paper deals with free vibrations of the tapered beams with the constant surface area. The surface area of the objective beams are always held constant regardless shape functions of the cross-sectional depth. The shape functions are chosen as the linear and parabolic ones. Ordinary differential equations governing free vibrations of such beams are derived and solved numerically for determining the natural frequencies. In the numerical examples, hinged-hinged, hinged-clamped and clamped-clamped end constraints are considered. As the numerical results, the relationships between non-dimensional frequency parameters and various beam parameters such as section ratio, surface area ratio, end constraint and taper type are reported in tables and figures. Especially, section ratios of the strongest beam are calculated, under which the maximum frequencies are achieved.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.217-220
• /
• 2014

We studied the plating properties of Sn-Pb solder according to the shape of the Cu wire's cross-section for photovoltaic ribbon. The thickness of the Sn-Pb layer largely decreased to 29% on a curved Cu surface, compared to a flat Cu surface. This phenomenon is caused by the geometrical decrease in the contact angle of the liquid Sn-Pb solder and an increase in the surface energy of the solid/vapor on the curved Cu surface. We suggest a new ribbon's design where the Cu wire's cross-section is a semi-ellipse. These semi-ellipse ribbons can decrease the use of Sn-Pb solder to 64% and increase the photovoltaic efficiency, by reducing the contact area between the ribbon and cell, to 84%. We also see an improvement of reflectivity in the curved surface.

• 대한수학회지
• /
• 제43권6호
• /
• pp.1339-1355
• /
• 2006

This paper develops in detail the differential geometry of ruled surfaces from two perspectives, and presents the underlying relations which unite them. Both scalar and dual curvature functions which define the shape of a ruled surface are derived. Explicit formulas are presented for the computation of these functions in both formulations of the differential geometry of ruled surfaces. Also presented is a detailed analysis of the ruled surface which characterizes the shape of a general ruled surface in the same way that osculating circle characterizes locally the shape of a non-null Lorentzian curve.