• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권2호
• /
• pp.53-59
• /
• 2005

In this paper, optimum shape design of permanent magnet in slotted type Permanent Magnet Linear Synchronous Motor(PMLSM) is progressed for minimization of detent force owing to structure of slot-teeth and thrust ripple by harmonic magnetic flux of permanent magnet. In order to reduce remodeling time as changing design parameter for Permanent Magnet shape optimization, the moving model node technique was applied. The characteristics of thrust and detent force computed by finite element analysis are acquired equal effect both skewed basic model and optimum model which is optimization of permanent magnet shape. In addition to, thrust per unit volume is improved 4.l2[%] in optimum model.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.42-48
• /
• 2009

Pipe welding is used in various ranges such as civil engineering and ship building engineering. Until now, many technicians work for pipe welding manually under harmful, dangerous and difficult conditions. So it is necessary to install automation process. For automation pipe welding, relation between welding parameters & bead shape should be considered. Using this relation, bead shape could be expected from welding parameters. FCAW was used in this study. Instead of pipe workpiece, fillet joint plate is used, which were inclined 0,45,90,135,180 degree. By analyzing between welding parameters (current, welding speed, voltage) and bead shape parameters with non-linear multiple regression, bead shape parameters could be expected. Piecewise Cubic Hermite Interpolation was used to expect smooth curved bead shape with bead shape parameters. From these processes, bead shape could be expected from welding parameters.

• 소성∙가공
• /
• 제8권1호
• /
• pp.92-100
• /
• 1999

A procedure is proposed for determining the initial thickness distribution in oder to produce a specified final thickness distribution for the axisymmetrical superplastic blow forming processes. Weighted parameter is introduced to improve the simple ad $d_traction method and the initial blank thickness distribution is obtained by optimizing the weighted parameter. This method is applied to superplastic free bulging process with the uniform thickness distribution of final shape to confirm its validity. The optimum initial blank thickness distributions is obtained from arbitrary axisymmetrical superplastic blow forming processes such as dome, cone and cylindrical cup forming with die contact. It is concluded that the ad $d_traction method with weighted parameter is an effective method for an optimum blank thickness distribution design.esign.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.41-44
• /
• 2008

In this paper, major species of tree were discriminated in compartment by using LiDAR data and optic imagery. This is an important work in forest field. A current digital stock map has created the aerial photo and collecting survey data. Unlike high resolution imagery, LiDAR data is not influenced by topographic effects since it is an active sensory system. LiDAR system can measure three dimension information of individual tree. And the main methods of this study were to extract reliable the individual tree and analysis techniques to facilitate the used LiDAR data for calculating tree crown 2D parameter. We should estimate the forest inventory for calculating parameter. 2D parameter has need of area, perimeter, diameter, height, crown shape, etc. Eventually, major species of tree were determined the tree parameters, compared a digital stock map.

• Communications for Statistical Applications and Methods
• /
• 제24권1호
• /
• pp.15-27
• /
• 2017

This paper introduces a two-parameter discrete distribution based on a continuous two-parameter bathtub distribution. It is the only two-parameter discrete distribution that shows a bathtub-shaped hazard function. Some statistical properties of the distribution are discussed. Three different methods are used to estimate its two unknown parameters. The point estimators of the parameters have no closed form. The bootstrap method is used to estimate the distributions of these point estimators. Different approximations of the interval estimations for the two-parameters are discussed. Real data sets are analyzed to show how this distribution works in practice. A simulation study is performed to investigate the properties of the estimations obtained and compare their performances.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.64-69
• /
• 2004

The characteristics of the probability distribution for mechanical properties, e.g. tensile strength, reduction of area, and elongation, for STS304 stainless steel in elevated temperature are investigated. Tensile test is performed by constant crosshead speed controls with 1mm/min. The probability distribution function of measured mechanical properties seems to follow $\alpha$ 3-parameter Weibull, and shows a slight dependence on the temperature. When the temperature is raised, the shape parameter a is increased, but both the scale parameter $\beta$ and location parameter v are decreased.

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.249-267
• /
• 2003

In this study, circular plates subjected to general type of loads and supported on a two-parameter elastic foundation are analysed. The stiffness, elastic bedding and soil shear effect matrices of a fully compatible ring sector plate element, developed by Saygun (1974), are obtained numerically assuming variable thickness of the element. Ring sector soil finite element is also defined to determine the deflection of the soil surface outside the domain of the plate in order to establish the interaction between the plate and the soil. According to Vallabhan and Das (1991) the elastic bedding (C) and shear parameters ($C_T$) of the foundation are expressed depending on the elastic constants ($E_s$, $V_s$) and the thickness of compressible soil layer ($H_s$) and they are calculated with a suitable iterative procedure. Using ring sector elements presented in this paper, permits the generalization of the loading and the boundary conditions of the soil outside the plate.

• Structural Engineering and Mechanics
• /
• 제70권2호
• /
• pp.209-219
• /
• 2019

By normalizing the internal hysteresis variable and eliminating the redundant parameter, the normalized Bouc-Wen model is considered to be an improved and more reasonable form of the Bouc-Wen model. In order to facilitate application and further research of the normalized Bouc-Wen model, some key aspects of the model need to be uncovered. In this paper, hysteresis characterization of the normalized Bouc-Wen model is first studied with respect to the model parameters, which reveals the influence of each model parameter to the shape of the hysteresis loops. The parameter identification scheme is then proposed based on an improved genetic algorithm (IGA), and verified by experimental test data. It is proved that the proposed method can be an efficacious tool for identification of the model parameters by matching the reconstructed hysteresis loops with the target hysteresis loops. Meanwhile, the IGA is shown to outperform the standard GA. Finally, a simplified identification method is proposed based on parameter sensitivity, which indicates that the efficiency of the identification process can be greatly enhanced while maintaining comparable accuracy if the low-sensitivity parameters are reasonably restricted to narrower ranges.

• 한국해안·해양공학회논문집
• /
• 제26권6호
• /
• pp.381-387
• /
• 2014

최근 우리나라 동해안에는 너울성 고파의 반복적인 내습이 빈발하고 있다. 외해에서 발생하여 갑작스런 내습과 함께 인명과 시설에 피해를 끼치는 너울성 고파를 대상으로 그 처오름 특성을 확인하였다. 파랑 스펙트럼의 형상을 정량화하기 위해 스펙트럼 형상모수 $Q_p$, ${\varepsilon}$, ${\nu}$ 등을 도입하여 이들 모수들과 유의파고 및 첨두주기와의 상관관계를 파악하였고, MIKE21 BW 모듈을 사용하여 완경사 해안에 대한 처오름 수치실험을 수행하였다. 파고와의 상관관계가 가장 낮은 $Q_p$를 추가적인 형상 변수로 채택하여 파랑 스펙트럼의 형상 변화에 따른 처오름 높이의 변화와 특성을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제6권3호
• /
• pp.419-428
• /
• 2003

어떤 물체 영역의 골격(skeleton)을 얻기 위해 세건화(thinning)하는 과정에서 잔가지(parasitic branch)가 발생하므로, 이러한 것을 효과적으로 제거하기 위한 여러 가지 연구가 이루어져 왔다. 이중에서 잔가지가 한 픽셀 두께의 가지로 나타나는 속성에 착안하여, 윤곽선 추적에 의한 대칭 경로(symmetric path)를 검출함으로써 잔가지를 제거하는 방법이 매우 효과적인 것을 알 수 있었다. 본 연구에서는, 이 방법을 영상 분할이나 연결 요소 추출 등에 의해 구해진 물체 영역의 윤곽선 부분에 나타나는 잡영가지 (noise branch)를 제거하는데 활용할 수 있도록 개선한 방법을 제안한다. 즉, 한 픽셀 두께의 잡영가지 뿐만 아니라, 부분적으로 두 픽셀 이상이 뭉쳐져 둥그스름한 덩어리(잡영블랍, noise blob)를 형성하고 있는 잡영가지도 제거할 수 있는 개선된 방법을 제안한다. 대칭 경로를 찾기 위해 4-8방향 윤곽선 추적 알고리즘을 이용하며, 잡영블랍이 포함된 경우에는 준대칭(quasi-symmetric) 경로를 정의하여 추출한다. 제안한 방법의 시간 복잡도는 윤곽선 픽셀수의 선형 함수로 표현되며, 사용자가 잡영블랍과 잡영가지의 크기를 임의로 설정하도록 하여 융통성있고 다양하게 잡영가지를 제거할 수 있도록 하였다. 실제 형상과 인위적 형상에 대한 실험을 통해 제안된 방법의 유용성을 확인할 수 있었다.