• Water for future
• /
• v.20 no.2
• /
• pp.117-126
• /
• 1987

A Synthetic unit hydrograph method was suggested for the representation of a direct runoff hydrograph with empirical geomorphologic laws and geomorphologic parameters by applying geomorphologic instantaneous unit hydrograph theory and Rossois results of application of GIUH theory to the Nash Model which is a linear reservoir model. The shape parameter m and scale parameter k can be derived by the Horton's empirical geomorphologic laws $R_A,R_B,R_L$ when ordered according to Strahler's ordering Scheme, main stream length and using the maximum velocity for the dynamic characteristics of a river basin, The derived response function was tested on some observed flood datas and showed promising. For the determination of the shape parameter m, eq. (16) was showed applying and m showed a good regression with the size of basin area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1314-1319
• /
• 2004

In this study, parameter optimization of micro-static mixer with a cantilever beam was accomplished for maximizing the mixing efficiency by using successive response surface approximations. Variables were chosen as the length of cantilever beam and the angle between horizontal and the cantilever beam. Sequential approximate optimization method was used to deal with both highly nonlinear and non-smooth characteristics of flow field in a micro-static mixer. Shape optimization problem of a micro-static mixer can be divided into a series of simple subproblems. Approximation to solve the subproblems was performed by response surface approximation, which does not require the sensitivity analysis. To verify the reliability of approximated objective function and the accuracy of it, ANOVA analysis and variables selection method were implemented, respectively. It was verified that successive response surface approximation worked very well and the mixing efficiency was improved very much comparing with the initial shape of a micro-static mixer.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.91-98
• /
• 2014

In this investigation, the effect of crack orientation on spatial randomness of fatigue crack growth rate (FCGR) in friction stir welded (FSWed) 7075-T651 aluminum alloy joints has been statistically analyzed by Weibull distribution. The fatigue crack growth tests are conducted under three different constant stress intensity factor range (SIFR) control at room temperature with R = 0.1 and frequency 10Hz on compact tension (CT) specimen machined at base metal (BM) and weld metal (WM). The experimental fatigue crack growth rate data were obtained for two types of specimens having LT and TL orientations. LT specimens both base metal and weld metal showed higher fatigue crack growth rate as compared to TL specimens. In the lower SIFR region, FCGR were found to be almost 3 times higher in higher SIFR region. The shape parameter of Weibull both LT and TL orientation for FCGR was increased with increasing SIFR, the scale parameter was also increased with increasing SIFR. The smallest value of the shape parameter was shown in weld metal specimens having LT orientation at lower SIFR region.

• Journal of Drive and Control
• /
• v.10 no.3
• /
• pp.27-33
• /
• 2013

Solenoid valve has used in various industrial field extensively. A solenoid valve has different size, shape and method of operation accordantly to industrial field. Many researchers study on kinds of solenoid valve such as flow rate, dynamic, magnetic field, valve shape and operating method. But the flow rate characteristic and dynamic response time performance on the diaphragm valve are not studied. This paper describes the flow rate characteristic and dynamic response time performance on the diaphragm valve. At first, the diaphragm valve is simulated in AMESim simulation tool. AMESim model found that an effect of valve performance depends on parameter. The parameter is the diaphragm orifice area. And the performance test bench confirms the effect in this parameter. Finally, it finds out the flow rate characteristic and dynamic response time performance on the diaphragm valve.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.195-202
• /
• 2011

The study interprets each of three classification models based on Bath-Tub Failure Rate (BTFR), Extreme Value Distribution (EVD) and Conjugate Bayesian Distribution (CBD). The classification model based on BTFR is analyzed by three failure patterns of decreasing, constant, or increasing which utilize systematic management strategies for reliability of time. Distribution model based on BTFR is identified using individual factors for each of three corresponding cases. First, in case of using shape parameter, the distribution based on BTFR is analyzed with a factor of component or part number. In case of using scale parameter, the distribution model based on BTFR is analyzed with a factor of time precision. Meanwhile, in case of using location parameter, the distribution model based on BTFR is analyzed with a factor of guarantee time. The classification model based on EVD is assorted into long-tailed distribution, medium-tailed distribution, and short-tailed distribution by the length of right-tail in distribution, and depended on asymptotic reliability property which signifies skewness and kurtosis of distribution curve. Furthermore, the classification model based on CBD is relied upon conjugate distribution relations between prior function, likelihood function and posterior function for dimension reduction and easy tractability under the occasion of Bayesian posterior updating.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.86-93
• /
• 2013

This paper deals with the effects of driving force and material properties on statistical distribution of fatigue crack growth rate (FCGR) for the friction stir welded joints of Al 7075-T651 aluminum plate. In this work, the statistical probability distribution of fatigue crack growth rate was analyzed by using our previous constant stress intensity factor range controlled fatigue crack growth test data. As far as this study are concerned, the statistical probability distribution of fatigue crack growth rate for the friction stir welded (FSWed) joints was found to evaluate the variability of fatigue crack growth rate for base metal (BM), heat affected zone (HAZ) and weld metal (WM) specimens. The probability distribution of fatigue crack growth rate for FSWed joints was found to follow well log-normal distribution. The shape parameter of BM and HAZ was decreased with increasing the driving force, however, the shape parameter of WM was decreased and increased with increasing the driving force. The scale parameter of BM, HAZ and WM was increased with the driving force.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.172-175
• /
• 2002

This paper presents perceptual model with a stochastic rnultiresolution characteristic that can be applied with watermark embedding in the biorthogonal wavelet domain. The perceptual model with adaptive watermarking algorithm embed at the texture and edge region for more strongly embedded watermark by the SSQ(successive subband quantization). The watermark embedding is based on the computation of a NVF(noise visibility function) that have local image properties. This method uses non-stationary Gaussian model stationary Generalized Gaussian model because watermark has noise properties. In order to determine the optimal NVF, we consider the watermark as noise. The particularities of embedding in the stationary GG model use shape parameter and variance of each subband regions in multiresolution. To estimate the shape parameter, we use a moment matching method. Non-stationary Gaussian model use the local mean and variance of each subband. The experiment results of simulation were found to be excellent invisibility and robustness. Experiments of such distortion are executed by Stirmark benchmark test.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.4
• /
• pp.253-260
• /
• 2010

This paper presents algorithms for computing offsets of freeform curves. The approach first divides the original curve into several segments at the inflexion points. Based on the obtained new control polygon and its offsets, quadratic trigonometric splines are constructed to approximate the offset curves. Finally, the shape parameter value of trigonometric spline is determined to satisfy the required tolerance. The degree of the output curve is two, independent of the original curve's degree. Because of the great controllability, the proposed method can generate a completely overestimating offset curve by adjusting the value of the shape parameter, which guarantees no overcutting in NC machining. Furthermore, it also produces the lowest number of control points compared with other works.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.833-839
• /
• 2003

The effects of stiffeners on the modal characteristics of rectangular plates are investigated. A modeling method for the modal analysis of rectangular plates with stiffeners is presented. A mass density Dirac's delta function is used to idealize the stiffeners mathematically. The equations of motion for the plates are derived and transformed into a dimensionless form. To confirm the accuracy of the method presented in this study, numerical result are obtained and compared to those of a commercial program. The mode shape variations due to some parameter variations are also exhibited.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.312-318
• /
• 2000

A modeling method for the vibration analysis of rotating cantilever plastes with stiffeners is presented. The equations of motion for the plates aer derived and trnasformed into a dimensionless form. A mass density Dirac's delta function is used to idealize the stiffener mathematically. The effects of stiffeners on the model characteristics of the plate are investigated, and mode shape variations due to some parameter variation are exhibited. It is found that veering phenomena occur between some loci and associated mode shapes change significantly during the veering phenomena.