• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.446-457
• /
• 2012

Aeroelastic analysis of an aircraft with a high aspect ratio wing for medium altitude and long endurance capability was attempted in this paper. In order to achieve such an objective, various structural models were adopted. The traditional approach has been based on a one-dimensional Euler-Bernoulli beam model. The structural analysis results of the present beam model were compared with those by the three-dimensional NASTRAN finite element model. In it, a taper ratio of 0.5 was applied; it was comprised of 21 ribs and 3 spars, and included two control surfaces. The relevant unsteady aerodynamic forces were obtained by using ZAERO, which is based on the doublet lattice method that considers flow compressibility. To obtain the unsteady aerodynamic force, the structural mode shapes and natural frequencies were transferred to ZAERO. Two types of unsteady aerodynamic forces were considered. The first was the unsteady aerodynamic forces which were based on the one-dimensional beam shape; the other was based on the three-dimensional FEM model shape. These two types of aerodynamic forces were compared, and applied to the foregoing flutter analysis. The ultimate goal of the present research is to analyze the possible interaction between the rigid-body degrees of freedom and the aeroelastic modes. This will be achieved after the development of a reliable nonlinear beam formulation that would validate the current results as well as enable a thorough investigation of the nonlinearity. Moreover, such analysis will allow for an examination of the above-mentioned interaction between the flight dynamics and aeroelastic modes with the inclusion of the rigid body degrees of freedom.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.107-114
• /
• 2011

본 논문에서는 나노 래핑 표면의 형상과 레이저산란 패턴 사이의 실험적 모델링에 관한 연구를 하였다. 우선, 반사표면에서 나타나는 산란광 속성들을 고찰하여 암시야 기반의 레이저산란 검사 메커니즘을 구성하였다. 이 메커니즘을 이용한 레이저산란 패턴 분석의 경우, 나노 래핑 표면 형상으로부터 산란된 레이저산란 성분은 불규칙하게 사선형태로 교차됨을 알 수 있다. 또한, 실험 계획법을 기반으로 도출된 매개변수로 적용된 최적의 레이저산란 영상에서 나노 래핑 표면 거칠기와 레이저산란 성분 사이의 상관관계를 회귀분석법을 이용하여 수학적 모델링을 시도 하였다. 이 모델의 검증을 위해 나노 래핑 표면 3 종류의 거칠기에 대해 50 번의 반복실험을 수행한 결과, 제시된 수학적 모델은 실제 거칠기 값에 근접하게 추정할 수 있음을 보였다.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.985-995
• /
• 2003

본 논문에서는 $\pm$20$^{\circ}$의 구형 빔 패턴 형성을 위한 삼차원 다층 원형 도체 배열 구조의 최적화 설계 변수들에 대하여 연구하였다. 원형 도파관 여기에 의한 다층 원형 도체 배열 구조의 각 방사 소자는 입력 원형 도파관, 임피이던스 정합용 원형 도파관, 방사 원형 도파관 그리고 그 위에 적층된 유한개의 원형 도체 배열층들로 구성되며, 각 방사 소자들은 원추형 빔 스캐닝에 적합한 정육각형 격자 배열 구조를 이룬다. 본 논문에서는 다층 원형 도체 배열 구조에 대한 해석 알고리듬을 제시하고, 이것을 프로그램 코드화하여 최적화 설계 변수 추출을 위한 다양한 설계 변수 변화에 대한 시뮬레이션을 수행하였다. 또한, 다층 원형 도체 배열 구조의 구형 빔 패턴 및 반사 계수에 대한 대역폭 특성을 살펴 보았으며, 그 결과 다층 원형 도체 배열 구조는 최소한 5.6 %의 주파수 대역폭내에서 $\pm$20$^{\circ}$의 양호한 구형 빔 패턴을 형성함을 알 수 있었다.

• 한국통신학회논문지
• /
• 제23권8호
• /
• pp.1998-2009
• /
• 1998

본 논문에서는 배경의 움직임이 유발되는 능동 CCD 카메라를 통하여 실시간으로 포착되는 영상 데이터를 대상으로 카메라의 사전 설치 정보나 좌표 보정(calibration) 없이 강체(rigid body) 혹은 비 강체(non-rigid body)의 움직이는 물체를 추출하고 이의 이동 방향을 판단하여, 추적하는 효율적인 알고리즘을 제안한다. 이동 물체의 영역분할을 위하여 동체의 형태를 규정하는 특징 점을 추출하고, 시간에 따른 특징 점의 이동 벡터로 구성된 특정 플로우 필드(feature flow field)를 구한 후 이들을 다차원 특정 공간상에서 군집화(clustering)함으로써 동체를 추출한다. 제안하는 IRMAS(lncremenatal Rotational Minimum Angle Search)에 의하여 군집화된 특정점들의 볼록 다각형(convex hull)올 구함으로써 이동 물체의 개괄적인 외곽 형태를 재 구성한다. 또한, 이동 궤적의 갑작스러운 변화를 가져올 수 있는 동작 특성을 가지는 이동 물체의 효과적인 추적을 목적으로 개선된 선형 예측기를 사용하였다. 이동 궤적 예측기는 기존의 선형 예측기의 차수를 이동의 변화도에 따라 적응적으로 조정함으로써 예측 오차를 감소시켜, 빠른 속도로 이동 궤적에 수렴한다.

• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.383-387
• /
• 1998

대구경(직경 4inch이상) $CaF_2$ 단결정성장을 위하여 vacuum-Bridgman 장치를 구성하였으며, 성장속도 2mm/hr, 성장온도구배 $12^{\circ}C$/cm의 조건하에서 성장한 $CaF_2$ 단결정은 우수한 물성을 갖는 것으로 분석되었다. 우산형(umbrella shape)의 Mo thermal reflector를 사용한 경우에 polycrystalline으로의 성장을 제거할 수 있었다. 성장우선방위는 (111)면이었으며, 분말 XRD법에 의한 peak로부터 $5.460\AA$의 격자상수를 구하였다. 또한 XRD분석에 의하면 제2상은 형성되지 않았으며, EPD값은 $1.4{\times}10^4 \textrm{cm}^{-2}$이었다. 성장된 결정은 UV영역의 광학부품용도로 사용하기에 적합한 투과율 91%이상의 특성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.38-38
• /
• 2010

Ever since the experimental discovery of graphene exfoiliated from the graphite flakes by Geim et at., this area has drawn a lot of attention for its possible application in IT industry. For the growth of graphene, chemical vapor deposition (CVD) has been widely used to fabricate the large area graphene. The lateral size of this graphene can be easily controlled by the size of the metal substrate though the chemical etching to remove this substrate is somewhat troublesome. Another problem which is hard to avoid is the folding at the grain boundary. We will discuss the origin of the folding first and introduce the way to avoid this folding. To solve this problem, we have used the various types of micro-thin metal foils. The precise control of hydro-carbon and the carrier gas results in the formation of the graphene on top of substrate. The thickness of graphene layers can be controlled with the control of gas flow on top of Cu substrate in contrast to the previously reported self-limiting growth $behavior^1$. Uniformity of this graphene layer has been checked by micro-raman spectroscopy and SEM. The size of grain can be enhanced by thermal treatment or use of other metal substrate. The dependence of grain size on the lattice size of the substrate will be discussed. By selecting the shape of substrate, we can grow various types of graphene. We will introduce the micron size graphene tube and its application.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.148-154
• /
• 2020

The radiation induced segregation of Cr at grain boundaries (GBs) in Ferritic/Martensitic steels was modeled assuming vacancy and interstitialcy diffusion mechanisms. In particular, the dependence of segregation on temperature and grain boundary misorientation angle was analyzed. It is found that Cr enriches at grain boundaries at low temperatures primarily through the interstitialcy mechanism while depletes at high temperatures predominantly through the vacancy mechanism. There is a crossover from Cr enrichment to depletion at an intermediate temperature where the Cr:Fe vacancy and interstitialcy diffusion coefficient ratios intersect. The bell-shape Cr enrichment response is attributed to the decreasing void sinks inside the grains as temperature rises. It is also shown that low angle grain boundaries (LAGBs) and special Σ coincidence-site lattice (CSL) grain boundaries exhibit suppressed radiation induced segregation (RIS) response while high angle grain boundaries (HAGBs) have high RIS segregation. This different behavior is attributed to the variations in dislocation density at different grain boundaries.

• 한국염색가공학회지
• /
• 제3권1호
• /
• pp.1-7
• /
• 1991

The influences, that various mercerization conditions had on the dying property of cotton fiber, were studied. Crystallization degrees accompained by lattice transformation of slack-mercerized cotton by IR spectroscopic analysis and morphology of the slack-merceized cotton by SEM were observed in this research. The above results were as follows; 1. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 19 were gained in the case of 8M NaOH, $10^{\circ}C$, 20 min., about 2 times as large as the rates of untreated cotton and gained about 2.5 times in the case of 8M $NH_3$, $10^{\circ}C$, , 20 min. 2. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 2 were gained in the case of 2M NaOH, $10^{\circ}C$, 20 min., about 1.7 times as large as the rates of untreated cotton and gained about 2.4 times in the case of 8M $NH_3$, $10^{\circ}C$, 20 min. 3. It was confirmed by SEM that untreated cotton fibrils are formed in the shape of screw and treated cotton is rearranged in the direction of fiber axis.

• Kyungpook Mathematical Journal
• /
• 제56권3호
• /
• pp.657-668
• /
• 2016

Given a partition ${\lambda}=({\lambda}_1,{\lambda}_2,{\ldots},{\lambda}_l)$ of a positive integer n, let Tab(${\lambda}$, k) be the set of all tabloids of shape ${\lambda}$ whose weights range over the set of all k-compositions of n and ${\mathcal{OP}}^k_{\lambda}_{rev}$ the set of all ordered partitions into k blocks of the multiset $\{1^{{\lambda}_l}2^{{\lambda}_{l-1}}{\cdots}l^{{\lambda}_1}\}$. In [2], Butler introduced an inversion-like statistic on Tab(${\lambda}$, k) to show that the rank-selected $M{\ddot{o}}bius$ invariant arising from the subgroup lattice of a finite abelian p-group of type ${\lambda}$ has nonnegative coefficients as a polynomial in p. In this paper, we introduce an inversion-like statistic on the set of ordered partitions of a multiset and construct an inversion-preserving bijection between Tab(${\lambda}$, k) and ${\mathcal{OP}}^k_{\hat{\lambda}}$. When k = 2, we also introduce a major-like statistic on Tab(${\lambda}$, 2) and study its connection to the inversion statistic due to Butler.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.269-273
• /
• 1991

High Tc oxide superconductor with a Tc above 100 K has been successfully prepared by solid state reaction method in added-Pb BiSrCaCuO system. As compared with 123 compound, the formation reaction of the high Tc requires long time heat treatment. It is due to the transformation from the low Tc phase to high Tc phase. The sintering just below the melting point of the calcined powder mixture is effective on the formation of the high Tc phase in BiSrCaCuO system to be added with Pb. The growth of the high Tc superconducting phase has a thin plate shape, which is characterized by the c parameter of 37${\AA}$. The formation kinetics is also investigated in the samples with different Bi/Pb ratio and the 30% Pb addition is most preferable for the formation of the high Tc phase. The formation of the high Tc phases is delayed by the excessive addition of Pb. The lattice parameter(c) of the unit cell(both the low and high Tc phases) is increased with increase of Pb.