• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.7
• /
• pp.1026-1035
• /
• 2002

The purposes of this study were to classify the front view of trunk of adult males into several kinds of shape and to provide the characteristics and silhouette of each group which has same shape. As the sample, subjects were l290 males of 20 to 54 year-old. The procedure and results were follows; l. The principal component analysis was used to obtain the shape factor of the front of the trunk 8 factors in the front which explained 86.8% of total variance were extracted. 2. As the result of the cluster analysis of factor scores, the font of body was classified in 4 types. 4 types were named X, A, Y and H type in the front considering the characteristics of each type.

• Journal of the Korean Home Economics Association
• /
• v.40 no.2
• /
• pp.67-86
• /
• 2002

The purpose of this research is to offer a method to derive the body shapes and pose factors with resets from analyzing factors by using the measurement values of human body. 297 male subjects in their twenties participated in this study. 54 anthropometric and 35 photographic measurements were taken from each subject. Data is the several typical items selected among items and you have to make an index value by using these typical items and convert it. The index has high correlation with each item, is easy to be measured and is to be used after selecting an important item in designing prototype. With results of analyzing reliability level by each item, correlation and items that factor loading is low, the item that the correlation is high is to be removed within the range that maintains the reliability level. Five factors of the front part and seven factors of the profile came to be derived from this kind of process.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1457-1460
• /
• 1987

2-D shape matching algorithm is proposed which uses pivot vector and componentwise adaptive convergence factor. It is proved that proposed algorithm has better result than any other algorithm. It is to be expected that this algorithm will work effectively in 3-D shape matching.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.13-24
• /
• 2019

Adolescence is a transitional stage of physical development which occurs during the period from puberty to adulthood. Going through this period, various parts of an adolescent's body grow at different rates, leading to different body shapes and proportions when compared to adults. Therefore, this study aimed to investigate the body sizes and shapes of junior high school boys from ages 13-15 based on body measurement items that are used as the basis for school uniform designs including jackets, shirts, and pants. For this, the study sought the basic data needed to develop body shapes and school uniform patterns for junior high school boys using the data from the 6th Size Korea Survey (2010). Specifically, it provided basic data for the development of school uniform patterns that fit well through the classification of bodies into particular types. After extracting body shape componen a cluster analysis using ANOVA was performed. According to the factor analysis conducted to determine body shape components, 5 factors were obtained as follows: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: characteristics of horizontal size, Factor 5: shape of the upper body with a variance of 82.62%. To classify junior high school boys' body shape was determined using various characteristics, and a cluster analysis was performed with the variables obtained by the factor analysis. For this, body shapes were classified into 3 different types: Type 1 accounted for 33.4%, with a total of 463 subjects. This type was a tall, long body individual with the smallest bulk and size. Type 2 accounted for 22.7%, with a total of 315 subjects. This type was large in bulk and horizontal size, but the lowest in height and length. Type 3 accounted for 43.9%, with a total of 610 subjects. This type was close to average in terms of horizontal size, length, and height. To develop well-fitting school uniforms for junior high school students, there should be further studies on changes in body shape and their associated causes. The study results will be available as basic data for comparing branded school uniform patterns for junior high school boys and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Fashion & Textile Research Journal
• /
• v.7 no.6
• /
• pp.650-656
• /
• 2005

The objective of this study is to analyze the formative attributes of face by measuring the shape and features of face. The faces of women in 20's were taken by digital camera and measured, then it has conducted a statistical analysis using a SPSS for factor analysis, correlation and cluster analysis. The findings are that it is consisted of six(6) different factors and it is responsible for 73.93%. In Factor 1 and Factor 2, it has explained the most significant factor to determine the shape of face. The result on cluster analysis is that it is classified into 5 groups and it is as follows. Attributes of each group is that Group 1 has a wide and long forehead, small and longish chin-line and chubby cheeks that represent polished and modern images, while Group 2 has small and longish forehead and chin-line that represent classical and mature images. On the other hand, Group 3 has a narrow forehead, small and longish chin-line and upward-style eyebrows that represents provocative images, whereas Group 4 has a shaped style that represent intellectual images and Group 5 has small and longish forehead and chin-line and cheekbones that represent polished and cute images.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.45-54
• /
• 2012

Optimization of the asymmetric trapezoidal fin with various upper lateral surface slope is made using a two-dimensional analytic method. For the fixed fin base height, the optimum heat loss, fin length and effectiveness are represented as inner fluid convection characteristic number, fin base thickness, fin base height, fin shape factor and ambient convection characteristic number. For this optimum procedure, the optimum heat loss is defined as 95% of the maximum heat loss from the fin. One of the results shows that optimum heat loss and effectiveness seems independent of the fin shape factor while optimum fin length decreases almost linearly as the fin shape factor increases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2533-2542
• /
• 1994

This paper suggests a simple approach to determining the screw characteristics for a three0dimensional flow in a channel with a finite aspect ratio(ratio of a width to a depth, W/H) by introducing a Total Shape Factor($F_t$) to correct a two-dimensional flow analysis for a channel with an infinite aspect ratio. In the present study, the Total Shape Factor($F_t$) was defined as a ratio of a net flow rate obtained by the three-dimensional analysis to that by the two-dimensional analysis. In the proposed approach, the quantity, $ \frac{{\partial}F_t}{\partial(H/W)}$ turns out to be almost constant and to play an important role in understanding the effects of the flights. Therefore, $ \frac{{\partial}F_t}{\partial(H/W)}$ are extensively reported in this paper in terms of several dimensionless parameters. This simple approach with such database will be very useful for extruder designers to predict the screw characteristics.

• The Research Journal of the Costume Culture
• /
• v.13 no.2 s.55
• /
• pp.200-208
• /
• 2005

This study was aimed to provide the measurement data and shape classification of the head of the Korean female children for the headwear sizing systems. Four hundred nineteen female children, aged nine to twelve years, participated for this study. The 19 regions on the head and height, weight of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed using these data. Through factor analysis, five factors were extracted upon factor scores and those factors comprised $71.318\%$ for the total variances. Three clusters as their head shape were categorized using fiver factor scores by cluster analysis. Type 1 was characterized by the widest head width, Bitragion arc, and shortest head length, and medium height and weight. Type 2 had the longest head length and the widest side head width and the highest head circumference, and highest height and largest weight. Type 3 was characterized by the medium head length, smallest head circumstance, narrowest head width and side head width, and smallest height and weight.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.462-469
• /
• 2010

Gas-liquid 2 phase processes are usually used in chemical, biochemical, environmental engineering and food process. For optimizing these processes, understanding bubble's precise movement and shape are needed. Bubble's movement and shape are effected by liquid's properties-viscosity, surface tension and bubble's properties-size, velocity. This paper deals with experimental data of bubble's movement and shape in high viscous silicone oil. Also, drag coefficient and deformation factor given by other researcher's papers and books are used to predicting and comparing bubble's terminal velocity, drag coefficient, deformation factor and shape with experimental value. Experimental data show that bubble moves faster when it moves in lower viscous silicone oil and it's drag coefficient is bigger when it moves in high viscous silicone oil. Bubble's shape is close to sphere when moving in high viscous silicone. Formulas proposed by Batchelor expect most accurate prediction for bubble's velocity and drag coefficient. Bubble's 2D shape predicted by Batchelor's energy balance, drag coefficient and deformation factor show excellent agreement with experimental bubble's 2D shape.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.535-541
• /
• 2005

The health of feet is connected with individual's health and affects a man's activity. Shoes need to be designed to protect feet and to absorb the impact of land. In order to choose suitable shoes for feet, the foot size and shape must be considered, so it is essential to grasp the exact size and shape of the foot. This study aims to present fundamental data on shoes' easy order prototype development for choosing shoes of good wearing comfort, by classifying feet size and shape junior high school boys in the early adolescent period. The subject were 234 Korean junior high school boys age from 14 to 16 years old. The subjects were directly measured anthropometrically and indirectly analyzed photographically. 6 factors were extracted through factor analysis and those factors comprised 79.42% of total variance. The factors characterizing foot girth and width, foot length, foot height, foot shape around the fifth toes, angle of foot breadth and foot shape around the first toes. 3 clusters as their foot shape were categorized using 6 factor scores by cluster analysis. Type 1 was characterized by long large foot with deformed first toe. Type 2 had smaller in foot girth, width and length than other types and with deformed fifth toe. Type 3 had average size and high foot shape. Shoes prototype which is to be developed later on will be able to generate 2D flattening in the foot sole form. Therefore, it would be a great support in producing and choosing appropriate shoes if forms are classified by subdividing foot form classification and extract a factor which shows only the foot sole shape.