• 대한기계학회논문집A
• /
• 제39권3호
• /
• pp.241-247
• /
• 2015

교량이나 배관과 같이 긴 길이의 구조물은 처짐 및 변형이 발생하기 쉽다. 이러한 구조물의 건전성 감시를 위해서는 국부적인 물리량 측정뿐만 아니라 전체의 형상 감시가 필요하다. 광섬유 브래그 격자(Fiber Bragg Grating; FBG) 센서는 광섬유에 다수의 센서 적용이 가능하여 대형 구조물 감시에 효과적이다. 본 연구에서는 FBG를 이용하여 구조물의 다점에서 변형률을 측정하고, 이를 바탕으로 구조물 전체의 형상 추정을 위한 연구를 수행하였다. 구조물의 정확한 감시가 가능하도록 3차원의 형상 추정을 연구하고 실험적 검증을 수행하였다. 실험 결과 구조물의 변형에 따른 형상 변화의 추정이 가능함을 확인하였고, 추가로 특정 위치에서의 처짐량을 실제 마이크로미터로 측정한 값과 예측된 값을 비교하여 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.672-678
• /
• 1993

The bead shape in high frequency electric resistance (HER) pipe welding gives important information ons judging current welding state. In most manufacturing process, the heat input is controlled by skilled operators observing color and bead shape. We proposed the bead shape monitoring system in HERW pipe process by using structured light beam. We reconstructs 3-D shape of bead from the measured data, and compare this shape with real 3-D shape obtained by coordinate-measuring machine. This experiment results show that the proposed system can monitor the bead shape with good accuracy.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.127-132
• /
• 2000

Morphological analysis of wear particles is one of useful methods for machine condition monitoring because it is well reflected in machine driving state. This paper was undertaken to apply to the condition monitoring of hydraulic piston motor. The lubricating wear test was performed under different experimental conditions using the wear test device and wear specimens of the pin on disk type was rubbed in paraffinic base oil by three kinds of lubricating materials, varying applied load, sliding distance. The four shape parameters(50% volumetric diameter, aspect, roundness and reflectivity) are used for morphological analysis of wear particles. The results showed that the four shape parameters of wear particles depend on a kind of the lubricating materials. It was capable of calculating presumed wear volume for three kinds of materials on driving time to foresee as damage condition of lubricating materials.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1186-1193
• /
• 2009

Wearable ECG monitoring is regarded as one of the most essential part in the ubiquitous healthcare environment and subsequently day-life monitoring of a heart condition has been pursued especially for the elder people. However, there are many problems to accomplish this task such as; i) implementation of long-term monitoring device, ii) development of non-irritating electrode on skin and iii) stable signal acquisition. With these aims, we have focused on implementing a non-irritating electrode with an endurable monitoring device for day-life. To accomplish our tasks, we basically developed four different types of textile electrodes that are adapted by both shape and the composed material; flat or convex shape and Ag-conductive paste material or not. It turns out to be that a convex shape and Ag-paste textile electrode has the best performance in terms of both signal-to-noise ratio (SNR) and Impedance/Phase characteristics. Furthermore, ECG amplifier (35 ${\times}$ 35 mm) has developed to resolve the ECG signal and transfer the signal to desktop computing device or portable one by RF serial communication.

• 한국축산시설환경학회지
• /
• 제6권1호
• /
• pp.15-22
• /
• 2000

A monitoring and the forecasting system for the swine delivery was developed using CCD camera multi-function board microphone and data-recorder equipped on a personal computer. For the swine delivery monitoring and forecasting factors four factors were selected such as genitalia swine body shape breast color and sound. Image of physical variation of body shape, shape and color of genitalia area and color of breast of pregnant sow were grabbed using the CCD color camera and multi-function board and variation of voice of pregnant sow was acquired using microphone and data recorder. Acquired information of image and voice were analyzed using a custom developed algorithm and program. The result of the forecasting efficiency of swine delivery was 89%, 71% and 100% using the variation of genitalia are the body shape and the voice of pregnant sow. respectively. The efficiency of image processing was 100% for the delivery detection when the piglet was delivered half of its body from genitalia of pregnant sow, The monitoring and forecasting system informed the estimated time of the delivery of swine to a farm manager immediately if an estimated and established time set by the farm manager was the same and/or the estimated time ws earlier than the established time and the system detected the delivery.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.82-87
• /
• 2000

This paper deals with monitoring of grinding wheel wear in grinding process. A monitoring system is developed in which a laser scanning micrometer is used to measure the circumferential shape as well as the axial shape of grinding wheel. The monitoring system is applied to grinding machines. The experiment results show that the monitoring system is useful not only for monitoring the amount of wear in grinding wheel but also for measuring the apparent diameter of the grinding wheel.

• 비파괴검사학회지
• /
• 제36권6호
• /
• pp.460-465
• /
• 2016

배관 구조물은 긴 길이를 가지며, 일정한 거리에 위치한 고정부에 설치되거나, 지중에 매설된다. 따라서 자중 또는 지반의 움직임으로 변형과 처짐이 발생하기 쉽다. 이러한 배관의 건전성 평가에는 형상 감시 기법이 매우 유용할 수 있다. 광섬유 브래그 격자 센서 (fiber Bragg grating, FBG)는 다중화의 장점이 있어 배관과 같이 긴 길이를 가지는 구조물의 여러 지점에서 변형률 측정에 매우 유용하다. 본 연구에서는 배관의 건전성 평가를 위하여 변형률 기반의 형상추정기법을 제안하였다. 제안된 기법의 유용성을 확인하기 위하여 실험을 통한 검증을 수행하였다. 실험 결과 제안된 FBG를 이용한 형상추정기법이 시험편의 변형에 따라 유사한 형상을 표현할 수 있음을 확인하였다. 또한, 형상추정기법을 통해 도출된 처짐량이 실제 배관에 가해진 처짐과 동일하게 계산됨을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1294-1298
• /
• 2007

Welding process monitoring is advantageous for maintaining weld quality and numerous sensing techniques have been developed for laser welding. Coaxial image monitoring enables direct monitoring of the weld pool shape and keyhole behavior, but requires the complex optical system and the image processing technique. In this study, we coaxially acquired the weld pool images during laser lap welding by using the camera and special illumination. The welding characteristics - pool width and length, keyhole shape, etc - were extracted by using image processing and the relationship between these characteristics and the penetration depth were investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.850-852
• /
• 2004

The usable output of glassware formation production line depends, among other factors, on the weight and shape of a lump of hot molten glass called a gob. In this paper, an automated image processing system for monitoring gob weight and shape on a production line is proposed. Present techniques often rely on manual weighing of gobs on a sample basis by manually controlling the gob feeder. The proposed automated image monitoring system checks the weight and shape of every free-falling gob before it reaches the mould. In this system, the estimated weight of the gob is sufficiently close to its actual weight.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.67-71
• /
• 2003

A hot press method was used to create the optimal fabrication condition for a Shape Memory Alloy(SMA) composite. The bonding strength between the matrix and the reinforcement within the SMA composite by the hot press method was more increased by cold rolling. In this study, the objective was to develop an on-line monitoring system in order to prevent the crack initiation and propagation by shape memory effect in SMA composite. Shape memory effect was used to prevent the SMA composite from crack propagation. For this system an optimal AE parameter should be determined according to the degree of damage and crack initiation. When the SMA composite was heated by the plate heater attached at the composite, the propagating cracks could be controlled by the compressive force of SMA.