Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Monitoring of Grinding Wheel Wear Using Laser Scanning Micrometer

LSM을 이용한 연삭 숫돌 마모 모니터링

  • Ju, Gwang-Hun (Graduate School of Kumoh National Institute of Technology) ;
  • Kim, Hyeon-Su (Graduate School of Kumoh National Institute of Technology) ;
  • Hong, Seong-Uk (Dept.of Machanical Engineering, Kumoh National Institute of Technology) ;
  • Park, Cheon-Hong (Korea Institute of Machinery and Materials)
  • Published : 2000.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with monitoring of grinding wheel wear in grinding process. A monitoring system is developed in which a laser scanning micrometer is used to measure the circumferential shape as well as the axial shape of grinding wheel. The monitoring system is applied to grinding machines. The experiment results show that the monitoring system is useful not only for monitoring the amount of wear in grinding wheel but also for measuring the apparent diameter of the grinding wheel.

Keywords

References

  1. Malkin, S., Grinding Technology: Theory and Application of Machining with Abrasives, John Wiley & Sons, pp. 197-221, 1988
  2. Brinksmeier, E. and Werner, F., 'Monitoring of Grinding Wheel Wear,' Annals of the CIRP, Vol. 41, No. 1, pp. 373-376, 1992
  3. Blunt, L. and Ebdon, S., 'The Application of Three-dimensional Surface Measurement Techniques to Charaterizing Grinding Wheel Topography,' Int. J. Mach. Tools Manufact. Vol. 36, No. 11, pp. 1207-1226, 1996 https://doi.org/10.1016/0890-6955(96)00041-7
  4. Gotou, E. and Touge, M., 'Monitoring of Wear of Abrasive Grains,' Journal of Materials Processing Technology, Vol. 62, pp. 408-414, 1996 https://doi.org/10.1016/S0924-0136(96)02444-2
  5. 垣野義昭, 松原厚, 山路伊和夫, 松田健嗣, 中用平三郞, 廣垣俟樹, 嘗田義宏, '砥石作業面トポグラフィのオン.ザ.マシン計測に關する硏究(第1報) : レ一ザスタイラスを用いた計測システムの開發,' 精密工學會誌, vol. 63, No. 2, 1997
  6. 홍성욱, 남경모, 김현수, '연삭 숫돌 직경 및 회전오차의 비접촉 측정 방법,' 한국정밀공학회지, vol. 12, No. 13, pp. 175-181, 1995
  7. 김현수, 홍성욱, '기상에서의 표면 거칠기 측정에 의한 연삭 공정 모니터링,' 한국정밀공학회지, Vol. 16, No. 1, pp. 167-173, 1999
  8. 주광훈, 김현수, 홍성욱, 박천홍, '평면 연삭에서의 연삭 숫돌 마모 모니터링,' 한국정밀공학회 춘계학술대회, 부산대학교, 2000
  9. 김선호, 안중환, '연삭 가공에 있어 비가공 시간 단축에 관한 연구,' 한국정밀공학회지, Vol. 14, No. 8, pp. 101-107, 1997
  10. Babu, N. R. and Radhakrishnan, V., 'Influence of Dressing Feed on The Performance of Laser Dressed #Al_2O_3$ Wheel in Wet Grinding,' Int. J. Mach. Tools Manufact., Vol. 35, No. 5, pp. 661-671, 1995 https://doi.org/10.1016/0890-6955(95)93036-6
  11. 後藤英, 峠睦, 大？慶史, '砥粒摩耗のインプロセス測定(第3報) : 濕式條件下で取り？まわた畵像の評？,' 精密工學會誌, Vol. 62, No. 9, 1996