• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.160-163
• /
• 2005

The cute. race of CV(constant velocity) Joint is an important load-supporting automotive part, which transmits torque between the transmission gear box and driving wheel. The outer race is difficult to forge because its shape is very complicated and the required dimensional tolerances are very small. The forged CV Joint investigated in this study has six inner ball grooves requiring high operational accuracy. Therefore, the precise measurement of forged CV Joint is very important to guarantee the sound operation without noise and abnormal wear. In this study, unique in-situ measuring system designed specifically to measure the dimensional accuracy of six inner ball grooves of CV joint has been developed and implemented in shop environments. Newly developed system shows high measurement accuracy with simple operational sequence.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.81-82
• /
• 2016

Cracks are inherent to concrete by its nature. The various size and shape of cracks induce deterioration of reinforced concrete structures including nuclear power plants. The wider and deeper the crack is, the concrete structures are more vulnerable to carbonization. Thus, it is essential to develop a reliable measurement technique of cracks inside concrete. In this study, an ultrasonic test method is applied to the crack measurements. The results can be used for evaluation of existing reinforced concrete structures.

• 조명전기설비학회논문지
• /
• 제22권1호
• /
• pp.17-23
• /
• 2008

본 논문에서는 2분할 수광 방식의 측정시스템을 이용하여 수도권 일대의 도로의 조도와 휘도분포를 측정하여 국내 도로조명 실태를 파악함으로써 조명시설들의 특징에 대하여 분석했다. 측정결과 대다수의 도로가 도로의 형태, 조명기구의 점등방식, 도로주변의 가로수 혹은 장애물 등의 영향으로 도로조명 허용기준을 만족시키지 못하고 있었다.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.479-484
• /
• 2014

In this paper, This study shows the content on the impact fuze test and the measurement using underwater explosion phenomena. The impact fuze has both a delay function and a super quick. Up to now, nothing but the naked eye of the observer has been used to verify performance of the impact fuze. The observer has determined the performance by the shape of the plume created from the explosion phenomenon. However, it is extremely difficult to use that method at a long range. In order to solve the problem, the measurement using the underwater explosion phenomena was tried.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.305-308
• /
• 2008

In this paper, the magnetic domain states and recordability of the molded magnetic nanopillars were examined and analyzed by magnetic force microscopy (MFM) measurement. We focused on the some of the technical issues for MFM measurement regarding the lift height and geometry of the MFM tip. The effects of MFM tip shape and lift height on the MFM resolution were analyzed. Finally, we showed that the magnetic film on each molded nanopillars has a single magnetic domain state.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.720-725
• /
• 2000

A new ultrasonic pulse-echo technique was developed and described for vibration measurement of the suspension assembly in hard disk drives. The method is based upon the difference in magnitude of two consecutive reflection waves from a moving object(suspension), while the traditional ultrasonic vibrometer uses the phase shift of the reference wave and the reflection wave. A cone-shape delay line is designed to access the small structure. A simple mathematical model is presented and analyzed with experimental results to show the feasibility of the method. The advantages of this ultrasonic vibration measurement method are relatively high resolution, low cost, and ease of implementation comparing with the Laser Doppler vibrometer.

• 한국추진공학회지
• /
• 제11권3호
• /
• pp.13-19
• /
• 2007

본 논문에서는 추진기관의 추력방향 성능 평가에 적용되는 다축시험대의 상호 간섭 최소화 설계 방안에 대해서 논하였다. 다축시험대의 변형 모델링으로 상호 간섭 크기를 이론적으로 예측하고 설계변수가 상호 간섭 크기에 미치는 영향을 평가하였다. 본 논문의 결과로부터 다축시험대 설치에 따른 정렬오차, 힘에 의한 시험대의 변형이 상호 간섭에 가장 큰 영향을 미치며 로드셀과 플렉셔의 물성 및 기하학적 형상에도 영향을 받는 것으로 분석되었다.

• 한국광학회지
• /
• 제14권3호
• /
• pp.219-223
• /
• 2003

광섬유의 잔류응력(residual stress)을 측정하기 위해 위상보정 편광기(polariscope)를 새롭게 구성하고, 간섭이나 회절에 대한 영향을 최소화시키면서 빠르고 정확하게 측정하는 방법을 제시하였다. 이 방법을 이용하여 일반 광섬유의 잔류 응력 분포를 측정할 수 있었다. 또한 광섬유의 잔류응력이 모재의 잔류응력분포와 달리 인출 시 발생하는 광섬유 내 온도의 냉각곡선에 밀접한 관계를 갖고 있음을 알 수 있었다.

• 새물리
• /
• 제68권11호
• /
• pp.1275-1280
• /
• 2018

We demonstrated transmission direct phase-measuring deflectometry (DPMD) with a specular phase object having discontinuous surfaces by using two displays and a two-dimensional array detector for display and by recording the distorted fringe patterns. Three-dimensional (3D) information was obtained by calculating the height map directly from the phase information. We developed a mathematical model of the phase-height relationship in transmission DPMD. Unlike normal transmission deflectometry, this method supports height measurement directly from the phase. Compared with other 3D measurement techniques such as interferometry, this method has the advantages of being inexpensive and easy to implement.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.45-50
• /
• 2001

This paper presents application of neutron diffraction technique to the measurement of residual stresses in the T-type 20 m thick welded stainless steel plates(100$\times$50 $mm^2$ and 50$\times$50 $mm^2$). The High Resolution Powder Diffractormeter of the Korea Atomic Research Institute was utilized in the measurement. The power of nuclear reactor was 24 MWt and the measured reflection in the 220 plane (2$\theta$）was $92.66^{\circ}$. Poisson ratio of 0.265 and elastic constant of 211 GPa were applied to the calculation of stresses and strains. Three directional components such as normal, transverse, and longitudinal stresses were measured. The results showed that three components were tensile and became compressive along the y axis in the zone away from the welded center. The compressive stresses became tensile in the zone away from the center line of x axis. This may be due to the balance effect caused by the net stress to keep the specimen shape flat.