• 대한가정학회지
• /
• 제41권6호
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.495-503
• /
• 2020

This study classified lower body shape according to thigh and waist shape to improve the fit of skinny blue jeans in adult women in their 20s. We analyzed the three-dimensional automatic measurement data, three-dimensional indirect measurement data, and index data using the three-dimensional female (20-29 years old) body scan data provided by Size Korea (6^th Korean Human Dimensional Survey Project). Factor analysis was performed to classify body type. We selected and analyzed 34 items related to thigh shape based on index items, angle items, and protrusion amount items from 99 items; consequently, seven factors were extracted and 82.39% of the total variance was explained. Cluster analysis according to factor analysis classified it into 4 types, and a post-test Duncan test was conducted to classify thigh features according to classified types. As a result, the characteristics of lower body shape according to the thigh types of women in their 20s are as follows. Lower Body Type 1 is shape with a more prominent belly and less prominent thighs. Lower Body Type 2 is a slender body figure with larger hips. Lower Body Type 3 has more prominent thighs compared to the waist and belly. Lower Body Type 4 has both a prominent belly and prominent thighs.

• 농업과학연구
• /
• 제47권4호
• /
• pp.753-767
• /
• 2020

The commercial value of strawberries is affected by various factors such as their shape, size and color. Among them, size determined by weight is one of the main factors determining the quality grade of strawberries. In this study, image technology was developed to predict the weight of strawberries using the shape characteristics of strawberry cultivars. For realtime weight measurements of strawberries in transport, an image measurement system was developed for weight prediction with a charge coupled device (CCD) color camera and a conveyor belt. A strawberry weight prediction algorithm was developed for three cultivars, Maehyang, Sulhyang, and Ssanta, using the number of pixels in the pulp portion that measured the strawberry weight. The discrimination accuracy (R2) of the weight prediction models of the Maeyang, Sulhyang and Santa cultivars was 0.9531, 0.951 and 0.9432, respectively. The discriminative accuracy (R2) and measurement error (RMSE) of the integrated weight prediction model of the three cultivars were 0.958 and 1.454 g, respectively. These results show that the 2D imaging technology considering the shape characteristics of strawberries has the potential to predict the weight of strawberries.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.79-86
• /
• 1999

Electronic Speckle Pattern Interferometry(ESPI) is a powerful tool to measure the vibration mode shape and resonance frequency for modal analysis. As for ESPI this method is very suited for full-field measurement of objects in industrial areas because the interferograms are recorded with a video camera and evaluated in real-time with a computer. In this study We performed experiments at the same constraint conditions as disk brake of the practical vehicle as far as possible and obtained the resonance frequencies and vibration mode shapes by using time-averaged ESPI at once. Finally to assure the expetimental results by time-averaged ESPI we also compare those with results obtained by Laser Doppler Vibrometer and obtained good agreement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.556-563
• /
• 2010

The main noise source of the rotary compressor for air conditioner was analyzed by using the measurement of sound intensity, modal analysis and operational deflection shape(ODS) analysis. In this study, the key noise source of rotary compressor was an accumulator, and noise was sharply increased due to the accumulator's resonance which has a big contribution to the noise. To reduce the excessive noise generated from accumulator, structural modification through ODS analysis were applied. Its validation was conducted by the measurement of noise and vibration on the accumulator's surface. The total noise was significantly reduced by 4.2dB(A).

• 복식문화연구
• /
• 제11권1호
• /
• pp.153-164
• /
• 2003

For this study, 148 female adults between the ages of 20 and 60 who satisfied the plus-size judgment criteria took part in this study. Criteria were Rohrer index is higher than 1.5, bust girth larger than 90cm, and RBW(relative body weight) index higher than 110. Using anthropometric measurement values, indirect measurement values, and index values, this study analyzed frequencies, Duncan multiple range, and ANOVA to obtain information on characteristics that determine a representative body shape, by age, 1'3r Plus-sized women. The results are as follows: Physical Characteristics of Pius-Sized Women by Their Age: Women in their 20s md 30s had broader shoulders with smaller waists, with large buttocks and thighs. Among women in their 50s and 60s, body fat level increased significantly in regions such as the chest and abdomen, which made their upper body heavier.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.601-606
• /
• 1993

The natural frequency measurement of passenger car tire under the load and rotation are studied. In order to obtain theoretical natural frequency and mode shape, the plane vibration of a tire is modeled to that of circular beam. By using the Tickling method based on Hamilton's principle, theoretical results are determined by considering tension force due to tire inflation pressure, rotational velocity and tangential, radial stiffness. Modal parameters varying the inflation pressure, load, rotational velocity are determined experimentally by using frequency response function method. The results show that experimental conditions are parameter for shifting of natural frequency.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.174-181
• /
• 1999

This paper describes the effect of the stylus tip size on the shape error in surface topography measurement. To analyze the distortional effect of an actual surface geometry origination from the finite stylus size, the surface is modeled as a sinusoid and the stylus tip as a circle. The magnitude of this distortion is defined as the ration of standard deviation, and this is expressed as an analytic function of the stylus tip radius and the geometrical parameter of a sinusoid. In this paper, the spectrum analysis of the profile is applied to investigate the distortional effect due to the mechanical filtering of the stylus in the frequency domain. and, the cumulative power spectrum is proposed to assess the shape error of measured data according to the various stylus tip sizes. From these results, a new method to select proper stylus tip radius is proposed.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.10-19
• /
• 1996

This paper presents a finger-shaped multisensor system which can measure the tyep and position of a target surface by contactl. The multi-sensor system consists of a sphere-shpaed optical tactile sensor located at the finger tip and a force/torque sensor located at the joint of a finger. The optial tactile sensor determines the type and position of the target surface using the shape and position of the CCD image of the touching area generated by a contact between the sensor and the taget surface. The force/torque sensor also determines the position and surface normal vector by applying the distributionof forces and torques t the contact point to the equations of finger shape. The measurements on the position and surface normal vector at a contact point obtined by two individual sensors are fused using a statistical method. The integrated sensor system has 0.8mm error in position measurement and 1.31$^{\circ}$ error in normal vector measurement. The developed sensor system has many applications, such as autonomous compliance control, automatic grasping and recognition, etc.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.57-61
• /
• 2006

A study has been made on the quantification and evaluation of fabric pilling using two-dimensional and three-dimensional hybrid imaging methods. Two-dimensional imaging method was good for some samples while three-dimensional measurement method for others, according to the properties of their base fabric. Various image processing techniques as well as three-dimensional data processing algorithms were applied for the extraction of pills from measured data and a series of shape parameters have been defined for the objective evaluation of fabric pilling. An evaluation criterion that is compatible with the conventional evaluation method has been proposed by applying the new evaluation method to the current photographic standards.