• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 2006

In Nd:YAG laser welding, evaluation methods of welding flaw are various. But, the method due to fume shape is difficult to classification of welding flaw. The Nd:YAG laser process is known to have high speed and deep penetration capability to become one of the most advanced welding technologies. At the present time, some methods are studied for measurement of fume shape by using high-speed camera and photo diode. This paper describes the machining characteristics of SM45C carbon steel welding by use of an Nd:YAG laser. In spite of its good mechanical characteristics, SM45C carbon steel has a high carbon contents and suffers a limitation in the industrial application due to the poor welding properties. In this study, fume shape was measured by infrared thermal camera that is non-contact/non-destructive thermal measurement equipment through change of laser generating power, speed, focus. Weld was performed on bead-on method. Measurement results are compared as two equipments. Here, two results are composed of measurement results of fume quantities due to fume shape by infrared thermal camera and inspection results of weld bead include weld flaws by ultrasonic inspector.

• 한국의류산업학회지
• /
• 제9권5호
• /
• pp.472-477
• /
• 2007

This study was intended to identify the constructing factors and hierarchy of images in the gathered skirts, which is expected to be helpful in shape classification. The gathered skirts were made by different gathering conditions: three kinds of the gathers ratio(1.5T, 2.0T, 2.5T) and different fabrics(cotton, mixed wool, polyester). 45 undergraduate and graduate women students responded to the nine gathered skirts during December in 2004 to February in 2005. 184 words expressing gathered skirt were collected through the investigation and analysis of questionnaires. 32 words arranged in based on the standard form with frequency before conducting factor analysis to identify the constructing factors of gathered skirt images. As a result of factors analysis, 2 factors-H shape, A shape were found out as constructing factors of gathered skirts. To explain the hierarchy of gathered skirt images, cluster analysis was applied. To observe the association of 32 words, dendrogram was introduced, and to interpret the result, five sub clusters were determined. This 5 clusters were continuously combined according to their frequency, based on the factors marks. Two major division of image clusters were 'simple and neat image', and 'fairly good and feminine image'.

• 대한가정학회지
• /
• 제34권3호
• /
• pp.219-232
• /
• 1996

This study is intended to find changing of upper body shape according to the increase of age of elderly women, to extract the factors which form the upper body shapes and to classify the upper body shapes and grasp the characteristics of each body type. The subject were 225 elderly women aged 55-79 years old. Data were analyzed by the multivariate method, especially factor and cluster analysis. The results are as follows: 1. The items of stature, weight and width and circumference of upper body decreased according to the increase of age. And, in the length items except the side neck point - the nipple point length decreased significantly. There were significant difference of upper body shape between age groups according to each group. 2. The shape of elderly women's upper body is determined the main 6 factors(the obesity of upper body, the shape of shoulder, the length of back side of upper body, the length of front side of upper body and the size of vertical direction between stature and arm and front neck width). 3. Elderly women have 4 types of upper body shapes, which are distributed evenly. The body type of Elderly woman changes from long and fat type to small and slim, type according to the increase of age.

• 복식문화연구
• /
• 제30권5호
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• 한국의류학회지
• /
• 제46권4호
• /
• pp.672-686
• /
• 2022

The study classifies and analyzes the lower-body-shape types of female adolescents aged 14 to 16 years to provide meaningful information for making ready-to-wear patterns that are suitable for various female adolescent body types. The body-size data of 830 females aged 14 to 16 years were analyzed from 6th Size Korea anthropometric study. A factor analysis of 27 measurement items related to the lower body extracted 3 factors: waist/upper legs, height of the lower body, and hip area. A cluster analysis classified the female adolescent lower-body types into four clusters: the skinny body type with the shortest lower-body length, the most obese body type with the largest girth, the normal body type with the longest hip length, and the slender body type with the longest lower-body length. The discriminant analysis determined that nine measurement items had the most influence on classifying lower-body-shape types, and discriminant functions were derived. These results are meaningful because they provide more precise information about lower-body-shape types.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.876-885
• /
• 1999

This study aimed to classify high school girls' frontal body shapes into a few representative types and to give each type a name to symbolize its typical shape clearly. Subjects consisted of 205 high school girls aged 15 through 17 years attending high schools in Kwangju. 55 anthropometric and 29 photographic measurements were taken from each subject. The data were reduced to a few factors and the main factors composing the frontal body shapes were classified into 3 clusters. as the results the frontal body shapes of the high school girls were classified into H, X, Y types.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.407-415
• /
• 1999

쉘형 구조물의 불안정 현상은 크게 뜀좌굴과 분기좌굴로 분류할 수 있다. 이들은 구조물의 형상특성, 특히 형상 초기불완전에 대해 매우 민감하게 반응한다. 본 연구에서는, 형상 초기불완전을 가진 쉘형 구조물의 불안정 거동을 파악하기 위해 양단이 힌지로 고정된 얕은 정현형 아치의 평형경로를 조사한다. 비선형 방정식을 얻기 위해 Galerkin법을 이용하였으며, 증분형 방정식으로의 변환은 섭동법을 이용하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.460-464
• /
• 1990

Texture provides an important source of information about the local orientation of visible surfaces. An important task that arises in many computer vision systems is the reconstruction of three-dimensional depth information from two-dimensional images. The surface orientation of texel is classified by the Artificial Neural Network. The classification method to recognize the shape of 3D object with artificial neural network requires less developing time comparing to conventional method. The segmentation problem is assumed to be solved. The surface in view is smooth and is covered with repeated texture elements. In this study, 3D shape reconstruct using interpolation method.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1225-1232
• /
• 2009

This study suggests a structural design process for the upper control arm installed at a vehicle. Static strength and durability are the most important responses in the structural design of a control arm. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the metamodel technique using the kriging method is adopted to obtain the minimum weight satisfying the strength constraint. Then, the final design is suggested by considering the durability criteria. The durability assessment is obtained by the index of fatigue durability called the SWT (Smith-Watson-Topper) index. The final optimum shape has been proposed by trial and error method.

• 한국의류학회지
• /
• 제26권2호
• /
• pp.270-279
• /
• 2002

The purpose of this study is to classify twenties males'lateral body shapes into a few representative types and to give each type a name to symbolize its typical shape clearly .297 male subjects in their twenties participated in this study. 33 anthropometric and 31 photographic measurements were taken from each subject. The data were reduced to 7 factors. The factor score composing the lateral body shapes was classified into 3 clusters. As the result the lateral body shapes of the males were classified into I, S, types.