• Clinics in Shoulder and Elbow
• /
• 제15권2호
• /
• pp.117-122
• /
• 2012

목적: 전위성 쇄골 간부 골절에서 관혈적 정복술 후 윤곽 성형된 잠김 압박 금속판(precontoured locking compression plate)을 이용하여 내고정을 시행한 환자를 대상으로 방사선학적 결과 및 임상적 결과를 분석하여 윤곽 성형된 잠김 압박 금속판의 유용성을 알아보고자 하였다. 대상 및 방법: 2009년 3월부터 2010년 2월까지 본원에서 쇄골 간부 골절에 대해 윤곽 성형된 잠김 압박 금속판을 이용하여 관혈적 정복 및 금속 고정술을 시행하고 1년 이상의 추시가 가능했던 34예를 대상으로 하였다. 수술 후 방사선학적 결과는 골유합 여부와 성별 및 나이에 따른 골유합 시기의 차이를 평가 하였으며 임상적 결과는 최종 추시 시 quick DASH Score 및 반대측과 관절 운동 범위의 차이를 평가 하여 분석하였다. 결과: 방사선학적 평가에서 모든 예에서 골유합을 얻을 수 있었으며 평균 골유합 기간은 12.3주였으며 성별 및 나이에 따른 골유합 기간은 통계학적으로 유의한 차이를 보이지 않았다(p=0.87). 임상적 평가에서 최종 quick DASH Score는 평균 23.5점 (12~42)이었으며, 최종 추시시 견관절의 운동은 건측과 비교 시 통계학적으로 유의한 차이를 보이지 않았다 (p=0.69). 결론: 전위성 쇄골 간부 골절에 대해 윤곽 성형된 잠김 압박 금속판을 이용한 내고정술은 정확한 해부학적 정복과 견고한 내고정을 유지 할 수 있어 조기 운동이 가능하여 견관절 운동의 회복과 함께 전례에서 골유합을 얻을 수 있어 쇄골 간부 골절 치료에서 유용하게 사용될 수 있다고 사료된다.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.187-190
• /
• 2010

Purpose: Pediatric trigger thumb is a condition of flexion deformity of the interphalangeal (IP) joint. The known surgical treatment is the release of the flexor pollicis longus by transection of the A1 pulley. We report two cases of pediatric trigger thumb that were resolved by releasing of additional pulley as well as A1 pulley. Methods: From March 2006 to April 2008, a total of 10 children with trigger thumb were operated. In two cases, transection of only the A1 pulley was insufficient to relieve the triggering. When more distally dissection, we found an additional pulley. After release of the additional pulley, the full extension of IP joint is obtained. Results: There were no significant complications. In 8 cases, the trigger thumbs were resolved by transecting only the A1 pulley, does not extend beyond the base of the proximal phalanx. In one case, the additional pulley was found to be more distal to the A1 pulley. It was necessary to extend the release up to the half in the proximal phalangeal shaft. In other case, the additional pulley was immediately adjacent to the A1 pulley. Conclusion: In most cases of trigger thumb, division of just A1 pulley is sufficient to relieve the triggering. However, dividing the A1 pulley in two patients proved to be insufficient to relieve the flexed deformity. In these cases, we found that the additional pulley, different from previous known A1 pulley, had existed, which must be transected to allow full excursion of flexor pollicis longus.

• 무역상무연구
• /
• 제55권
• /
• pp.265-290
• /
• 2012

CEPA (Comprehensive Economic Partnership Agreement) between India and Korea may vitalize Korean economy more and more. Currently most of Korean firms have entered into manufacturing industries like electronics and automobiles. But only a few Korean companies are trying to penetrate into Indian green industry so this paper suggest how to enter into Indian green industry, especially renewable energy sectors. First, Exporting main shaft, tower-flange and polysilicon products can be considered, as a first step of entry mode. Second, entry mode based on contract like technology licensing, strategic alliance and joint venture establishment can be also one of options. For example, Korean solar energy industry which show more competitiveness than that of Indians should try to make technological licensing on PV modules. In addition to this, they should also try to make joint ventures with right Indian partners and build up 'Solar City' nearby regions like Gurgaon in India where many Korean firms are located. Korean shipbuilding firms like Hyundai Engineering which keep on developing wind turbo engines can also try to make strategic alliance with Indian firms like Suzlon which has strong competitiveness. After that, they should explore Korean and Indian wind sector markets together. Third, brownfield investment can be last and final option as a entry mode as we consider the peculiar characteristics of renewable energy industry. Lastly, Korean government which are rush to indulge into green business should formulate more proper and realistic policies to give big incentives the concerned firms which are trying to open international green market so government should make Korean green firms not to lose good market opportunities related to green industry like renewable energy sectors. Renewable energy sectors are basically regarded as infrastructures so close contact to Indian central government as well as state government will be also required.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.108-118
• /
• 2009

As increasing demand on marine structures and skyscrapers, a deep shaft pile is frequently to be used for the place having weak ground strength. Because heavy horizontal force is generally applied on upper part of pile foundation used in engineering field, steel pile is highly used due to its high resistance to shear force and bending moment, and its capability to carry heavy loads. The steel pile has advantage in good constructibility, high applicability on site and easy handing, but has disadvantage in cost, more expensive than other material pile. This study is to examine the composite pile that makes economical construction possible by reducing material cost of pile; using steel and PHC pile A non welding connection method is applied to this composite pile. This study had step of comparison with the result of numerical analysis after analyzing the result of field test. Numerical analysis is the process of analyzing lateral behavior of non welding composite pile. Moreover, detailed analysis was implemented in order to evaluate joint stability. As a result of the analysis, we could interpret that the stability of the connection part is ensured as seeing the smaller internal stress than approved internal stress. Based on this study, we analyzed lateral behavior of non welding composite pile, which ensured the stability of connection part.

• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.165-171
• /
• 2023

건설기계와 특장차의 상부와 하부 구조를 연결하는 로터리 조인트는 축과 하우징이 회전하면서 유압을 전달하는데 오일의 유로에 누유를 방지하기 위해 여러 개의 시일이 조립된다. 시일재료는 강성이 커서 조립에 어려움이 있기 때문에 자른 후 조립하는 방법을 모색하였다. 절단면의 모양은 L형과 /형으로 하였고 유압이 작용할 때 누유 기준은 절단면에 발생하는 접촉압력으로 하였다. 시일의 구조와 재료는 이중 탄성중합체로 구성되며 강성이 큰 PE 재질만 절단한 경우에 대하여 비선형 접촉 구조해석을 수행하였다. 연구결과 절단 길이가 짧을수록 누유 방지에 유리하며 PE와 하우징이 접촉하는 윗면보다 NBR과 PE가 접촉하는 아랫면으로 누유될 가능성이 큰 것으로 나타났다.

• 한국지반공학회지:지반
• /
• 제11권3호
• /
• pp.55-68
• /
• 1995

본 연구는 수직구의 바닥굴착을 위한 바닥발파시 삼승근환산식과 자승근환산식의 발파진동상수 및 감쇠지수와 암질지수(RQD)와의 관계를 시험발파계측을 통하여 정리분석한 것이다. 각종 발파시 발파진동의 크기는 장약량, 발파원과 발파진동 측정지점과의 거리, 지반의 특성에 따라 크게 좌우되며 본 논문에서는 지반의 특성이 발파진동에 미치는 영향을 규명하기 위하여 암반의 절리특성을 대표하는 RQD와 발파진동 크기와의 관계를 연구한 것이다. 시험결과 RQD의 증가에 따라 발파진동상수 K와 감치지수 n의 절대치는 상대적으로 증가하는 것으로 나타났으며 본 연구결과에 의하여 향후 암질지수에 따른 바닥발파의 발파진동속도를 예측할 수 있다.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.226-232
• /
• 2000

This paper develops a finite element model for studying the crashworthiness analysis of a mid-size truck. A simulation for a truck frontal crash to a rigid barrier using the model is performed with PAM-CRASH installed in super computer SP2. Full vehicle model is composed of 86467 shell elements, 165 beam elements and 98 bar elements, and 86769 nodes. The model uses four material model such as elastic, elastic-plastic(steel), rigid and elastic-plastic(rubber) material model which are in PAM-CRASH. Frame and suspension system are modeled with 28774 shell elements and 31412 nodes. Cab is modeled with 34680 shell elements and 57 beam elements, and 36254 nodes. Bumper is modeled with 2262 shell elements, and 2508 nodes. Axle, steering shaft, etc are modeled using beam or bar elements. Mounting parts are modeled using rigid bodies. Bodies are interconnected using nodal constrains or joint options. To verify the developed model, frontal crash test with 30mph velocity to a rigid barrier is carried out. In the crash test, vehicle pulse at lower part of b-pillar is measured, and deformed shapes of frame and driver seat area are photographed. Those measured vehicle pulse and photographed pictures are compared those from the simulation to verify the developed finite element model.

• 대한골관절종양학회지
• /
• 제5권1호
• /
• pp.82-85
• /
• 1999

A parosteal lipoma is a benign tumor containing mature adipose tissue and is intimately related to the adjacent periosteum. We experienced a very rare case of parosteal lipoma arising from the shaft of femur. A 46 years old lady visited the hospital with complaining of slowly growing mass in her thigh for 7 month. Initially, it was difficult to differentiate from osteochondroma, parosteal osteosarcoma or liposarcoma. Based on the assessment of plain radiogram and magnetic resonance imaging, it was suspected the parosteal lipoma or osteosarcoma. Marginal excision was performed, and it was confirmed to parosteal lipoma histologically. We present the case with review of literatures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.562-573
• /
• 2006

Incheon Bridge which will be the world's 5th long cable-stayed bridge in 2009 has been built under the management by Korea Highway Corporation. Incheon Bridge consists of several special-featured bridges and construction sections are divided into two groups, the private investment section with the foreign concessionaire and the government-financed section. 8 pile load tests were performed to investigate the behavior of rock-embedded large-diameter drilled shafts at both sections. Among these, 4 tests at the government-financed section have been utilized to adjust the detailed designs that were carried out individually as well as to find the actual bearing capacity of the ground prior to the commencement of constructions under the joint control of all contractors. Comprehensive procedures of the design and the construction of foundations using pile load tests were introduced.

• Archives of Reconstructive Microsurgery
• /
• 제9권1호
• /
• pp.56-61
• /
• 2000

Recommendable reconstructive surgery in the patient with thumb amputation through base of the first metacarpal bone is pollicization. Some patients who do not agree with harvest sound finger as a new thumb, we can consider other options as toe transplantation or osteoplastic thumb reconstruction for creating thumb. Toe transplantation to the thumb is effective procedure in the amputation of distal to metacarpal shaft, it is rarely indicated in the cases of proximal to base of the first metacarpal bone. We performed three cases of modified osteoplastic thumb reconstruction with free vascularized rib that combined with scapular free flap or radial forearm flap. The length of transplanted rib ranged from 7~11cm, the donor vessels are posterior intercostal artery and vein which anastomosed to radial artery. The grafted rib wrapped with additional free flap for creating new thumb. Result of that procedure was not much encouraging, aesthetic appearance and mobility of thumb were not so satisfactory but reconstructed thumb gave improvement of the hand function without sacrificing toe or other digit. That gave reasonable stability for powerful side pinch and three pod pinch and opposable thumb with normal carpo-metacarpal joint motion that can give much function to the thumb absent hand. In spite of those disadvantages, thumb reconstruction with rib transfer can be useful for patients who do not want to lose another part of the body for creating thumb in basal amputation of the thumb metacarpal.