• 소음진동
• /
• 제4권1호
• /
• pp.23-31
• /
• 1994

When a shaft is misaligned, a high level of vibration is experienced. As a consequence, the system performance could be low with high level of noise generated. Even, a catastrophic damage of the rotating machinery may happen in the worst situation. The vibration caused by the shaft misalignment is not cured unless a correct alignment of the shaft is investigated. In this paper, a step by step approach for the turbine alignment has been demonstrated. It includes measurement tips of the coupling rim and face, calculation procedure of the bearing level, and the relevant values of the addition and subtration for shims in order to align the shaft level correctly. Then, as an application of the shaft alignment, the turbine system at the Pyung Tek focile electric power plant has been examined. Since the real system consists of high pressure, low pressure turbines and the generator, detailed alignment prolcedures of the multi stage shaft system has been demonstrated.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.457-466
• /
• 1998

The dynamic response of an elastic torsion shaft of revolution is analysed by the Line-Loaded Integral Equation Method (LLIEM). A "Dynamic Point Ring Couple" (DPRC) is used as a fictitious fundamental load and is distributed in an elastic space along the axis of the shaft outside the shaft occupation. According to the boundary condition, our problem is reduced to a 1-D Fredholm integral equation of the first kind, which is simpler for solving than that of a 2-D singular integral equation of the same kind obtanied by Boundary Element Method (BEM), for steady periodically varied loading. Numerical example of a shaft with quadratic generator under sinusoidal type of torque is given. Formulas for stresses and dangerous frequency are mentioned.

• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.17-24
• /
• 2004

터보 제너레이터의 시동기는 터보 샤프트 발전 시스템 시동기의 구성인 기어박스, DC 전동기, 저 전압 축전지를 대신하여 고속 발전기, 인버터 그리고 승압기로 구성된다. 터보 제너레이터는 시동 시 고속 회전이 요구되어 고속발전기는 수십 $\mu$Η의 낮은 누설 인덕턴스를 가지며, 인버터는 높은 전압의 DC link 전압이 필요하다. 본 연구에서는 시동기 구현을 위해 축전지 전압을 높은 전압으로 승압하는 대 용량 승압기를 개발하였다. 그리고 낮은 누설 인덕턴스를 갖는 전동기 권선에 높은 주파수의 전류 제어를 위해 정밀 고속 연산을 수행하는 인버터 드라이버의 설계와 안정된 점화를 위한 터보 제너레이터의 시동 알고리즘을 제안하였다. 또한 개발한 시동기로 터보 제너레이터의 시동을 수행하여 성능을 확인하였다.

• 한국추진공학회지
• /
• 제8권3호
• /
• pp.17-26
• /
• 2004

본 연구에서 동력 전달 시스템은 분리 축 방식의 가스 터빈 엔진의 축 동력을 발전기 전력으로 변환하여, 이것을 프로펠러를 구동하는 추력 모터에 공급하는 방식으로 구성되어있다. 여기에 사용된 가스 터빈 엔진은 엔진 축 마력 317shp(236kw)을 약110kw (147shp)으로 플랫 레이팅(flat rating) 하여 운용한다. 본 시험 장치의 엔진은 가스 터빈엔진 출력축과 발전기 사이에 부하 변화 시 댐핑(damping)역할을 할 수 있도록 플라이 휠(flywheel)을 장착하였다. 이 때 플라이휠의 적절한 관성 모멘트가 고려되지 않으면, 발전기와 모터는 부하 상승에 의한 엔진으로부터 요구되는 출력을 얻을 수 없으며, 또한 엔진이 정상적으로 작동하지 않음을 확인할 수 있다. 따라서 제공된 엔진 데이터와 엔진 시험 데이터로부터 동역학적인 천이 효과에 의한 성능 분석을 함으로써 관성 모멘트의 요구 범위를 결정하였다. 재설계한 플라이휠을 장착 시험한 결과, 본 시스템에서 요구한 출력을 얻을 수 있었다.

• 한국기계연구소 소보
• /
• 제4권2호
• /
• pp.99-107
• /
• 1982

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1176-1189
• /
• 2016

In this paper, a novel quasi-direct power control (Q-DPC) scheme based on a resonant frequency adaptive proportional-resonant (PR) current controller with a variable frequency resonant phase locked loop (RPLL) is proposed, which can achieve a fast power response with a unity power factor. It can also adapt to variations of the generator frequency in T-type Three-level shaft synchronous generator (SSG) converters. The PR controller under the static α-β frame is designed to track ac signals and to avert the strong cross coupling under the rotating d-q frame. The fundamental frequency can be precisely acquired by a RPLL from the generator terminal voltage which is distorted by harmonics. Thus, the resonant frequency of the PR controller can be confirmed exactly with optimized performance. Based on an instantaneous power balance, the load power feed-forward is added to the power command to improve the anti-disturbance performance of the dc-link. Simulations based on MATLAB/Simulink and experimental results obtained from a 75kW prototype validate the correctness and effectiveness of the proposed control scheme.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.966-971
• /
• 2008

Free-piston engine system is a new type energy converter which uses a linear motion of piston by using linear generator. In free-piston engine system, the piston is not connected to a crank-shaft. The major advantages of free-piston engine system are high efficiency and low mechanical loss from the absence of motion conversion devices. Linear generator of free-piston engine system is used as generator and starting motor. In design step, considering of back-emf and detent force characteristics for generating mode and thrust and control characteristics for starting mode is needed. In this research, generating mode of flat-type linear generator and tubular-type linear generator is analyzed by finite element analysis method and starting mode of both type linear generators is analyzed by using capability curve. Capability curve is plotted from electrical parameters of both type linear generator and motion profile is calculated from mechanical parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.93-94
• /
• 2011

This paper analyzes the shaft torsion of a doubly-fed induction generator (DFIG) for a wind farm collector system fault. When a fault occurs, the active power of the DFIG cannot be transmitted to the grid and thus accelerates the rotation of both the blade and the rotor. Due to the different inertia of these, the angle of deviation fluctuates and the shaft torsion is occurred. This becomes much severe when the rotational speed of the blade exceeds a threshold, which activating the pitch control to reduce the mechanical power. The torque, which can be sixty times larger than that in the steady state, may destroy the shaft. The shaft torsion phenomena are simulated using the EMTP-RV simulator. The results indicate that when a wind farm collector system fault occurs, a severe shaft torsion is occurred due to the activation of the pitch control.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.14-19
• /
• 2017

Fuel oil consumption cost varies depending on every ship operation and this roughly amounts to 70 % of shipping companies' total revenue. As such, efforts towards improved fuel economy are being pursued. An annual 1 % reduction in fuel consumption is perceived to result in saving tens million US dollars on the global fleet operation. One approach is the application of power take-off configurations which are seen to increase fuel oil economy and are suitable for power generation. In this study, the dynamic properties of a shaft generator coupled on a 10S90ME main engine of an 18 600 TEU container vessel is presented. The vibratory torque and angular velocity variation was examined through theoretical analysis and actual vibration measurement. The result of the study suggests a review on existing classification rules for generator design and the lowering of vibratory torque and angular velocity variation guideline.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.250-254
• /
• 1998

Pump-storage power plants, which pumps water from the lower reservoir to the upper reservoir using the extra electronic power at night and generates the electronic power in the daytime, are more increasing. Currently it has a tendency to be high-head large-capacity machines. So in the processing of design, we need to know the vibration characteristics of pump-turbine shaft system sufficiently. In this paper, we developed the computer programs for analyzing pump-turbine shaft system considering magnetic force of generator, hydraulic force at runner, dynamic characteristics of guide bearings and the effect of add mass of water. And the superiority of this program was verified by applying it to the real model and calculating high quality critical speed, natural mode and unbalance response.