• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.230-236
• /
• 2021

Changes in greenhouse temperature and solar radiation due to fogging and shading were monitored during hydroponics in high temperature in summer season. Experiment 1 consists of four treatments, namely, Control, Shading, Fogging, and Fogging + Shading based on sunny days August. For Experiment 2, two melon cultivars of 'Dalgona' and 'Sopoong gaza' were cultivated in summer of 2020 using Fogging + Shading with the best result for temperature reduction effect from Experiment 1. As a result of Experiment 1, the effect of Fogging + Shading on temperature reduction was apparent where the inside was about 4℃ (as the lowest temperature) lower than the outside. Fogging + Shading showed the inside was 2-4℃ lower than the outside, and Fogging or Shading treatments had little difference, compared to the Control where the internal temperature of greenhouse was 3-4℃ higher than the external. For solar radiation changes between greenhouse inside and outside, the internal change was in a similar pattern between Fogging and Control, and between Shading and Fogging + Shading, respectively. In case of the Fogging treatment (similar with the Control) only the effect of solar radiation reduction as influenced by plastic greenhouse covering materials was examined. The Fogging + Shading had a very similar change in solar radiation to the Shading. Based on these results, Experiment 2 was conducted in summer of 2020 and resulted in a temperature reduction effect of about 3.9℃ according as the inside of air-conditioned greenhouse was kept 32.4℃ when the maximum temperature of the outside reached 36.3℃ in August during the cultivation period. In addition, the quality of melon fruit was good (1.3-1.5 kg of fruit weight, 12.6-13.3 of soluble solids content. In the case of using Fogging + Shading cooling treatment, it can bring about the effect of reducing the temperature during the high temperature in summer, and normal growth of melon and fruit harvesting were possible.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.40-41
• /
• 2011

Partial shading on a Photo Voltaic panel can generate the local maximum power points on the powervoltage curve of the panel. Presence of the local peaks can disturb the efficient operation of maximum power point tracking (MPPT).In this study, the MPPT under partial shading condition is investigated. To circumvent the trappings into the local peaks, the results of the study are enumerated and discussed.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.445-450
• /
• 2008

본 논문에서는 객체의 인식성을 높이기 위해 가상의 지역 광원을 사용한 카툰 렌더링 기법을 제안한다. 지역 광원은 각 메쉬의 기하 정보를 분석하여 배치되며 객체의 지역적인 음영 대비를 증가시켜 객체의 모양과 특정이 눈에 잘 띄도록 한다. 하지만 지역 광원을 사용한 쉐이딩 기법은 객체의 일부 영역에서 갈라지고 불연속적인 음영을 만들어 이미지의 질적 하락을 초래한다. 이러한 현상을 막기 위하여 곡률과 샐리언시의 개념을 사용하여 영역의 특성에 따라 차등적으로 지역 광원을 객체에 적용하였다. 곡률은 해당 영역의 기하적 특성을 구분하여 지역 광원에 의한 음영 대비 증감을 조정하고, 샐리언시는 영역의 중요도를 판별하여 곡률이 쉐이딩에 미치는 가중치를 조절한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.65-68
• /
• 2013

A photovoltaic array exhibits several local and single global maximum power points under partial shading conditions. To track the global maximum power point precisely, a novel global maximum power point tracking scheme is proposed in this paper. In the proposed scheme, robustness of the tracking performance has been improved by enhancing searching profile. In addition, the paper addresses the tracking failure condition, and provides the experimental verification with several simulation and experimental results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.169-172
• /
• 2009

Daylight responsive dimming system, which is one of the method for utilizing available daylight. continuously adjusts lighting output with an algorithm of the correlation of photosensor signal and workplane illuminance levels. This system must be related with shading systems which are to control penetrating daylight. The purpose of this research is to analyze illuminance distributions by artificial lighting in different shading systems. Lighting power is changed by 5 levels in nighttime for comparing correlation between illuminance and lighting power in different shading systems.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.96-103
• /
• 2012

Annual energy consumption in detached houses are affected mainly by thermal performance of envelope. In particular the performance of glasses are critical due to global wanning and climatic change. Therefore, this research analyzes annual consumption of cooling and heating energy with various combination of U-value, shading coefficient and building orientation. The simulation results shows that shading coefficient of glazing contributes to the changes of proportion of heating and cooling energy demand and the optimized shading coefficient for minimizing energy consumption varies with buildings orientation.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.

• Journal of the Korean Institute of Educational Facilities
• /
• v.15 no.2
• /
• pp.4-15
• /
• 2008

The purpose of this study was to evaluate the characteristics of daylighting environment in classroom of an school building due to the external shading devices such as fixed louvers, light shelves and exterior venetian blinds. In this study, we have made a field research with regard to the facade design in classroom of an school building. And we have made a classification of external shading devices considering the design parameters. Finally, through RADIANCE simulation, we have calculated the spatial distribution of illuminance, uniformity ratio of illuminance and daylight factors. The results of this study will provide the building designer with the basic daylighting performance data at early design stages.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.407-407
• /
• 2011

태양전지에서 Fill Factor를 저하시키는 직렬저항의 성분들은 베이스저항, 에미터 저항, contact 저항, finger 저항, busbar 저항 등이 있다. 각각의 저항 성분은 전극의 width및 height, 그리고 전극과 전극 사이의 spacing을 가변함에 따라 각기 다른 값을 나타내는데, 낮은 직렬저항 값을 달성하기 위해 전극의 면적을 크게 하는 것이 바람직하지만, 이는 cell의 shading loss를 증가시켜 cell의 JSC를 저하시킨다. 그러므로 cell의 면적과 전면 에미터의 면저항을 고려하여 shading loss와 직렬저항을 최소화 하는 최적의 전면 전극의 설계가 중요하다. 본 논문에서는 시뮬레이션을 통해 전면 전극의 height, spacing 및 width를 가변하여 1 by 1, 2 by 2, 3 by 3의 cell 면적에서의 전면 전극의 설계를 최적화 하였다. 시뮬레이션 결과 각각의 cell면적에서 단위면적당 저항 값이 500 $m{\Omega}$ 이하, shading loss가 4% 미만인 전극을 설계하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.25-28
• /
• 2006

In this paper, we say the shading correction system supporting multi-resolution for camera. The shading effect is caused by non-uniform illumination, non-uniform camera sensitivity, or even dirt and dust on glass (lens) surfaces. In general this shading effect is undesirable [1]. Eliminating it is frequently necessary for subsequent processing and especially when quantitative microscopy is the fine goal. The proposed system is available on thirty nine kinds of image resolutions scanned by interlaced and progressive type. Moreover, the system is using various continuous quadratic equations instead of using the piece-wise linear curve which is composed of multiple line segments. Finally, the system could correct the correct effect without discontinuity in any image resolution. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG5560 and the TV set.