• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• Journal of Biosystems Engineering
• /
• v.24 no.4
• /
• pp.293-300
• /
• 1999

The objectives of this study were to analyze the load acting on the transmission when tractor performed rotary operations in the poorly drained paddy fields and to compare its severeness with those obtained under different operational conditions. The loads were measured at the input shaft of the transmission and the load spectrum was constructed using the rain-flow cycle counting method. The severeness of the loads was represented by the partial damage sum which was determined by suing the modified Miner's rule. In the field with a shallow hardpan PTO speed affected severeness of the rotary operations greater than the forward speed did. In the field with deep hardpan, on the other hand, the effect of the forward speed was greater. the severeness in the well drained fields did not differ significantly from that in the field with a shallow hardpan. The severest load was recorded in the field with a deep hardpan.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.23-31
• /
• 2019

The purpose of this study was to evaluate the PTO severeness for an agricultural tractor during disk plow and rotary tillage. The PTO load measurement system was constructed with data acquisition and a PTO torquemeter. Field experiments were conducted at a combination of traveling speed (L3 Low, L3 High) and PTO speed (P1, P2). The load spectrum was generated using the rain-flow counting method, and the SWT method was used to consider the range and mean of the PTO load. The damage sum was calculated by applying a modified miner rule, which is a cumulative damage law. The relative severeness was expressed as the ratio of the lowest damage sum. Relative severeness was higher with the lower PTO gear stage, and higher driving gear stage and it was approximately 40-102 times higher for rotary tillage than disk plow tillage in the same gear stages. The relative severeness was 1010.12 in the rotary tillage under L3 High P1 based on the disk plow tillage under L3 Low P2.

• Korean Journal of Social Welfare
• /
• v.66 no.4
• /
• pp.281-306
• /
• 2014

This paper explores the how the disability type, severeness and economic activeness affects marital satisfaction, and seeks to improve marital satisfaction among disabled by clarifying mediating effects of discriminatory experiences in everyday experiences. This research was done with 3,463 married disabled who were prone to everyday discrimination, among whom were enrolled in research database of Employment Development Institute of Korea Employment Promotion Agency for the Disabled. The research showed positive effects between marital satisfaction and everyday discriminatory experience except for unemployed people and severe among all the disabled type (external disability, sensory disability, mental disability, internal disability), disability severeness (severe and light), and economic activeness (paid workers, self-employed, home-worker, unemployed, not economically active). Also, relationship between disability type, severeness, economical activeness and marital satisfaction was partly mediated through everyday discriminatory experiences. Therefore, active movements to reduce everyday discrimination are strongly advised.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.417-426
• /
• 1998

This study was intended to investigate the characteristics of loads acting on the transmission of agricultural tractors during plowing, rotavating and transporting operations. A survey was conducted to determine working speeds and transmission gears most frequently used for each operations. The transmission loads were measured at the input shaft of the transmission gear box during each operations. Time histories of the measured torque loads were converted into a load spectrum and analyzed with respect to the S-N curve of the shaft material to estimate the partial damages on the transmission. Finally, comparison of the relative damages and severeness of each operation was presented and discussed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.1
• /
• pp.39-46
• /
• 1993

In developing a multiple regression relationship, independent variables are frequently measured with error. For these situations the problem of estimating unknown parameters has been extensively discussed in the literature while little attention has been given to the prediction problem. In this paper a criterion is developed for assessing the severeness of measurement errors in each independent variable on the predicted values. Using the developed criterion we can present a guideline as to which measurement error should be controlled for a more accurate prediction. Proposed methods are illustrated with a standard data system in work measurement.

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.727-736
• /
• 2001

Dentinal hypersensitivity is one of the complicated symptom rather than a disease. It has special reaction or pain over uncovered root by heat, mechanical or chemical stimulations, which are normal with healthy teeth, The purpose of this study is to discover rather MS Coat (oxalate-containing pre-polymerized resin suspension) or Elmex gel(amine fluoride+sodium fluoride) is effective on hypersensitivity after periodontal treatment using NRS(Numerica1 Rating Scales), which it is useful for evaluating pain level. This study has been prepared in Dankook Dental Hospital with generally healthy adult who had been suffered from dentinal hypersensitivity after periodontal treatment. Divided in three groups with saline(control group), MS Coat(test 1 group) and Elmex gel(test 2 group). And then, following evaluations were made at the end of 1 minute, 1 week, 1 month and 3 months. 1. The sequence of higher frequency & severeness of hypersensitivity is water within $7^{\circ}C$, air stream & explorer. 2. As time goes on, 1 minute, 1 week, 1 month & 3 months, severeness of hypersensitivity scored lower with water, air stream and explorer. 3. With explorer, the differences among three groups as time had to seen. 4. With air stream, the sensitivity scored lower after 1min with MS Coat, Elmex, and saline sequence. As time goes on the sensitivity was lower with MS Coat and Elmex than saline, but there was no difference between MS Coat and Elmex. 5. With water in $7^{\circ}C$, the sensitivity was much decreasing with MS Coat and Elmex than saline, but there was no difference between MS Coat and Elmex. As the result, MS Coat and Elmex are effective on hypersensitivity caused by periodontal treatment.

• Journal of radiological science and technology
• /
• v.19 no.2
• /
• pp.45-49
• /
• 1996

To determine the utility of spiral computed tomography(CT) in the evaluation of carotid artery stenosis, spiral CT images of 10 patients were compared with both ones of conventional angiography and magnetic resonance(MR) angiography. The severeness of stenosis was determined for each Internal carotid artery on the basis of arterial narrowness : mild stenosis : 40 % or less, moderate stenosis = $40{\sim}70%$, severe stenosis = greater than 70 % of arterial narrowness. The short examination and clear depiction of the arterial lumen In areas of complex or low flow make CT angiography attractive alternative to MR angiography. Spiral CT angiography shows normal and abnormal carotid anatomy well when compared with conventional anglography.

• Journal of Nutrition and Health
• /
• v.20 no.6
• /
• pp.422-431
• /
• 1987

Dietary habits and serum lipid composition of 80 hospitalized patients with cerebrovascular disease (CVD) were compared to those of normal subjects. CVD patients were significantly higher in BP, serum cholesterol and triglyceride levels and low4r in HDL-choelsterol which resulted in the higher ratio of serum chol/HDL-chol than normal. Patients were also lower in the relative amount of HDL fraction by electrophoresis but were higher in LDL fraction and the ratio of LDL/HDL . In Korean, the high levels of serum chol, TG and LDL with low level of HDL as well as high BP could be one of the important causing factors of CVD. However, dietary habits of patients were not significantly different from those of normal . There is a possibility that patients might have controlled their dietary habits after they realized the severeness of disease.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.245-253
• /
• 1990

In a regression relationship the independent variables are frequently measured with error when measurements are made in the field under less controlled conditions, or when accurate instruments are not available. This paper deals with the prediction problem for the above situation. The integrated mean square error of prediction (IMSE) is developed as a measure of the effect of the errors in the independent variables on the predicted values. The IMSE may be used for assessing the severeness of measurement errors as well as for comparing competing estimators. An example from the area of work measurement is analyzed.