• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.22-30
• /
• 1999

This study was carried out to examine the compressive strength characteristics of solids solidified with the lead sludge with mixture of cement and fly ashes as additive. And the additives are commercial fly ash and ESP(Electrostatic precipitator) fly ash. The compressive strength of solidified lead sludge solid was increased by adding fly ash up to 46~62%, which was the results of pozzolanic reaction. When replaced the cement with 10%of commercial fly ash, the solid showed the highest value $210{\;}kg/cm^2$, and the solidification conditions were 0.55 of the water/cement ratio and curing for 14 days. Also, the results of leaching test by EPT(Environmental Protection Agency-Toxicity Test) were showed that the solidified lead has leached out under 10%, which was less than 0.173 mg/L of EPA standard. As leaching solutions, the demineralized water, 0.1N acetic acid solution, and synthetic brine were used. and the observations by SEM of the solidified lead-laden solid after EPT leaching test were indicated the severe erosion on solid surface.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.121-129
• /
• 2011

Hydrocarbons which are the main sources of VOCs from motor vehicles are emitted not only from the engine exhaust gas but also from evaporation of the fuel in storage and supplying systems. Evaporative emissions from gasoline fuel systems could be classified by diurnal, hotsoak and running loss. Diurnal loss test procedures are different as countries. Korea introduced new evaporative regulation in 2009 with 24hour VT-shed test procedure and relaxed emission standards. The estimations on different test procedures in this study show that the new Korean regulation get a little more severe than before and the 2 day diurnal loss test of U.S. is the most severe. So the test procedures as well as the stronger standards should be considered in the next evaporative emission regulation to reduce VOCs from motor vehicles. The important parameters to affect evaporative emissions are air and fuel temperature and fuel vapor pressure. Diurnal loss increases exponentially as rising air temperature and vapor pressure. The effects of vapor pressure on running loss are different as the capacities of canisters. Tests with simulating real temperature and driving conditions show that hydrocarbons in evaporative emissions could be more than those in exhaust gas in summer season because of the higher air temperature.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.494-507
• /
• 2019

A diagnostic investigation of the conservation state of damaged murals of the Payathonzu temple mainly indicated delamination, exfoliation, and contamination of the coloring layer; cracks and damage to the wall; and separation from gaps. In particular, vulnerabilities resulting from cracks in the wall and damage from gaps demand swift reinforcement measures. Ultrasonic testing uncovered damage caused by gaps between the base layer and plastered wall in several areas of the mural, vulnerable parts in the wall around the cracks, and considerable degradation of the physical properties where cracks and gaps were severe. Moisture measurements identified vast disparities in moisture depending on location even within a single area of the mural, and it was clear that these disparities were the result of environmental conditions such as humidity. Damage to the murals in monument 477 was the most severe, and a diagnostic of the physical properties uncovered severe physical damage to the upper part of the mural as well as to the corridor ceiling, thus presenting the need for conservation treatment utilizing scientific diagnosis as well as objective data.

• Korean Journal of Ecology and Environment
• /
• v.41 no.4
• /
• pp.423-430
• /
• 2008

As of September 2008,45 Automatic Water Quality Monitoring Systems (AWQMS) have been installed at different sites on the 4 rivers to detect early the presence of pollutants in water and to issue an alarm. We count the number of issuing alarms by AWQMS, however, we will find the alarm has hardly been issued. The reasons for the scarcity of alarm issue are extensively being examined. The National Institute of Environmental Research attributes wrong alarm criteria for each AWQMS station to one the reasons. In this study, a suggestion has been made to modify the current alarm criteria to correspond with characteristics of river water quality. The current system with only two criteria (low and high) should be replaced as four-criteria systems (low, medium, high, and severe) based on cases of other advanced countries and stream conditions of Korea. The highest value of data collected for 5 years was suggested as the alarm criteria for each parameter. Meanwhile the alarm criteria for VOCs, phenol and heavy metals were established as same as drinking water quality criteria.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.199-208
• /
• 2011

Environment standards can be used as a foundation of environment administration (specific expression of political goals or quantitative evaluation standards of political effects). When environment adminstration improves severe air or water pollution rapidly, the environment standard can work effectively to show the goals specifically and clearly. The environment index which is designed to evaluate environment systems, should be established to express the environment system generally. To realize sustainable development, the sustainable indexes usually consisting of these three areas in that harmony of environment, economy and society are required. In this research, sustainable environmental indicators to understand the characteristics and to compare likes theme of environmental conditions in international and national level indicators, regional environmental management plan to promote the management by objectives are to provide the basic data. It is desirable for the environmental policies to work harmoniously with direct control, use of economic means and voluntary methods. Regarding the evaluation of environmental index, the action results of civilian's or individual's activities are needed to be reflected into the evaluation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.1
• /
• pp.66-72
• /
• 1979

interrelationship among the characters of the top and the root within a plant was investigated by deviding the roots of the plant into two parts and growing each one in two different environmental conditions, The roots grown on the poor environmental conditions such as over flooding moisture and overdried were less in numbers of root. shorter in root length. and lighter in root weight than those of good growing conditions, It was demonstrated that the roots grown under the poor environmental conditions affected not only the growing of the associated tillers but also the growing of all the tillers within a plant. In comparision with untreated plants. the culm length of treated plants was shortened. and the heading time of them was delayed. The most remarkable yield reduction was appeared at the over flooding moisture treatment. and the next was at the overdried treatment. The ten dency of yield reduction was more severe in sandy soil than that of clay loam.

• Smart Structures and Systems
• /
• v.15 no.2
• /
• pp.283-297
• /
• 2015

Jacket-type offshore structures are always exposed to severe environmental conditions such as salt, high speed of current, wave, and wind compared with other onshore structures. In spite of the importance of maintaining the structural integrity for an offshore structure, there are few cases to apply a structural health monitoring (SHM) system in practice. The impedance-based SHM is a kind of local SHM techniques and to date, numerous techniques and algorithms have been proposed for local SHM of real-scale structures. However, it still requires a significant challenge for practical applications to compensate unknown environmental effects and to extract only damage features from impedance signals. In this study, the impedance-based SHM was carried out on a 1/20-scaled model of an Uldolmok current power plant structure in Korea under changes in temperature and transverse loadings. Principal component analysis (PCA)-based approach was applied with a conventional damage index to eliminate environmental changes by removing principal components sensitive to them. Experimental results showed that the proposed approach is an effective tool for long-term SHM under significant environmental changes.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.6
• /
• pp.338-348
• /
• 2003

In the past decade, considerable progress has been made in developing the appropriate biotechnology for microalgal mass cultivation aimed at establishing a new agro-industry. This review points out the main biological constraints affecting algal biotechnology outdoors and the requirements for making this biotechnology economically viable. One of them is the availability of a wide variety of algal species and improved strains that favorably respond to varying environmental conditions existing outdoors. It is thus just a matter of time and effort before a new methodology like genetic engineering can and will be applied in this field as well. The study of stress physiology and adaptation of microalgae has also an important application in further development of the biotechnology for mass culturing of microalgae. In outdoor cultures, cells are exposed to severe changes in light and temperature much faster than the time scale re-quired for the cells to acclimate. A better understanding of those parameters and the ability to rapidly monitor those conditions will provide the growers with a better knowledge on how to optimize growth and productivity. Induction of accumulation of high value products is associated with stress conditions. Understanding the physiological response may help in providing a better production system for the desired product and, at a later stage, give an insight of the potential for genetic modification of desired strains. The potential use of microalgae as part of a biological system for bioremediation/detoxification and wastewater treatment is also associated with growing the cells under stress conditions. Important developments in monitoring and feedback control of the culture behavior through application of on-line chlorophyll fluorescence technique are in progress. Understanding the process associated with those unique environmental conditions may help in choosing the right culture conditions as well as selecting strains in order to improve the efficiency of the biological process.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.153-154
• /
• 2002

Wear map of silver coatings on AISI 52100 has been constructed to delineate the wear transition behavior with the change in operating conditions in various environments. Three main regimes were clearly identified: (i) elastic/plastic deformation of silver coating without failure. (ii) mild wear regime after initial failure of silver coating and (iii) severe wear regime. In the mild wear regime, the contact surfaces were covered with transfer layers of agglomerated wear particles. The transfer layer acted as a protective layer and resulted in low friction even after the initial failure of the coated films, whose characteristics were strongly dependent on both the operating and environmental conditions. Also, the existence of the critical sliding speed, above which no transfer layer was able to form, was discussed in the work.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.595-598
• /
• 2005

Recently, owing to the development of industry and the improvement of building techniques, the concrete structure is becoming larger and higher. In hardening these large concrete, the heat of hydration gives rise to considerable thermal stress depending on the size and environmental condition of concrete, which might cause thermal cracking. Especially, the crack may cause severe damage to the safety and the durability of concrete structure. This study is investigated the thermal properties of concrete according to several binder conditions, such as OPC, Belite rich cement(BRC), slag cement(SC), blast furnace slag (BFS) added cement, fly ash added cement and BFS-fly ash added cement. As a result of this study, the concrete made with BRC, fly ash($25\%$) added cement and BFS($35\%$)-fly ash($15\%$) added cement gets superior effect in the control of heat hydration.