• The Korean Journal of Food And Nutrition
• /
• v.36 no.3
• /
• pp.202-208
• /
• 2023

FT-IR, GC/MS, and ATR-FT-IR analyses were performed to confirm the physicochemical characteristics of saw palmetto fruit (SPF) extract. FT-IR analysis of the standard product showed that the band corresponding to the carbonyl bond of free fatty acid was stronger than the band of acyl-glyceride. Sample E was identified as having the same trend as the standard sample. Fatty acid composition analysis revealed that the main fatty acids in the standard sample were lauric acid and oleic acid. The content of lauric acid ranged from approximately 30% to 38% in samples B, C, D, and E, while the content of oleic acid ranged from approximately 29% to 34%. The GC/MS analysis confirmed that the standard SPF extract consisted of fatty acids and fatty acid ethyl esters. Sample E demonstrated a similar pattern to the standard samples in terms of oleic acid, lauric acid, and fatty acid esters. ATR-FT-IR analysis indicated that only sample E was predicted to contain 100% saw palmetto extract. Therefore, these study findings can be considered fundamental data for analyzing the physicochemical characteristics of the composition of SPF extract.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.8-16
• /
• 2023

This study evaluated a shear capacity of confined socket-bolt (CSB) shear connector developed for utilizing cast in placed pile (CIP) as a permanent underground wall. The push-out tests were performed in the specimens with different CIP types, CSB shear connector types, L/d, and concrete compressive strengths of concrete pile, and with or without waterproofing at interfaces between CIP and underground wall. Test results showed that the specimens with a H-shaped pile were fractured in the CSB shear connector, while the fracture concentrated in the concrete part of the specimens with a reinforced concrete pile was alleviated as the compressive strength of the concrete pile increased, resulting in the severe fracture of CSB shear connector. The maximum shear capacities of the specimens with high strength bolts and reinforcing bars used as CSB shear connector were approximately 1.22 and 1.20 times higher than those of the specimens with a H-shaped pile, respectively, and 1.10 and 1.16 times higher than those of the specimens with a reinforced concrete pile, respectively. Meanwhile, the maximum shear capacity was not significantly affected by the embedding length of the CSB shear connector and overlapping length of reinforcing bar. The predicted shear capacities calculated from the KDS standards were lower than the measured values of all specimens tested in this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.761-766
• /
• 2006

Polymer composite are increasingly considered as structural components for use in civil engineering, on account of their enhanced strength-to-weight ratios. Unsaturated polyester (UP) resin have been widely used for the matrix of composites such as FRP and polymer composite, due to its excellent adhesive. Polymer nanocomposites are new class of composites derived from the nano scale inorganic particles with dimensions typically in the range of 1 to 1000 nm that are dispersed in the polymer matrix homogeneously. Owing to the high aspect ratio of the fillers, mechanical, thermal, flame, retardant and barrier properties are enhanced without significant loss of clarity, toughness or impact strength. To prepare the MMT (Montmorillonite)-UP exfoliated nanocomposites, UP was mixed with MMT at $60^{\circ}C$ for 3 hours by using pan mixer. XRD (X-ray diffraction) pattern of the composites and TEM (Transmission Electron Micrographs) showed that the interlayer spacing of the modified MMT were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified MMT were higher than those of the composites with unmodified MMT. The thermal stability of MMT-UP nanocomposite is better than that of pure UP, and its glass transition temperature is higher than that of pure UP. The polymer concrete made with MMT-UP nanocomposite has better mechanical properties than of pure UP. Therefore, it is suggested that strength and elastic modulus of polymer concrete was found to be positively tensile strength and tensile modulus of the MMT-UP nanocomposites.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.6
• /
• pp.51-70
• /
• 2022

This study examined whether learner-customized start-up education, such as business consulting, functions effectively as part of universities' start-up support and whether business consulting positively strengthened start-up capabilities compared to consulting from other institutions. Furthermore, it explored the direction of universities' start-up support development by harnessing customized education, such as business consulting. The results of the study are as follows. First, business consulting had a positive impact. It informed the shortcomings of individual founders (teams) and identified the direction for improvement. Second, compared to consulting from other institutions, the fact that it formed a relationship between the consultant and the student beyond the business relationship and that it was conducted for free on campus have a relative advantage. Such business consulting enabled university students to see the world more maturely. Third, this study argues that customized start-up businesses can generate synergy with school curriculum and other non-curricular subjects. Based on this perception, it designed a method to build a co-curriculum education system. This study is significant because it investigated satisfaction and the possibility of a customized start-up business with business consulting as a representative case, exploring the direction of support for start-up education students want.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.69-75
• /
• 2024

This paper proposes an IoT-based indoor autonomous driving system that applies SLAM (Simultaneous Localization And Mapping) and Navigation techniques in a ROS (Robot Operating System) environment based on TurtleBot3. The proposed autonomous driving system can be applied to indoor autonomous wheelchairs and robots. In this study, the operation was verified by applying it to an indoor self-driving wheelchair. The proposed autonomous driving system provides two functions. First, indoor environment information is collected and stored, which allows the wheelchair to recognize obstacles. By performing navigation using the map created through this, the rider can move to the desired location through autonomous driving of the wheelchair. Second, it provides the ability to track and move a specific logo through image recognition using OpenCV. Through this, information services can be received from guides wearing uniforms with the organization's unique logo. The proposed system is expected to provide convenience to passengers by improving mobility, safety, and usability over existing wheelchairs.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.140-148
• /
• 2008

In this study, a numerical method for a time-domain acoustic wave backscattering analysis is established based on a physical optics and a Fourier transform. The frequency responses of underwater targets are calculated based on physical optics derived from the Kirchhoff-Helmholtz integral equation by applying Kirchhoff approximation and the time-domain signals are simulated taking inverse fast Fourier transform to the obtained frequency responses. Particularly, the adaptive triangular beam method is introduced to calculate the areas impinged directly by acoustic incident wave and the virtual surface concept is adopted to consider the multiple reflection effect. The numerical analysis result for an acoustic plane wave field incident normally upon a square flat plate is coincident with the result by the analytic time-domain physical optics derived theoretically from a conventional physical optics. The numerical simulation result for a hemi-spherical end-capped cylinder model is compared with the measurement result, so that it is recognized that the presented method is valid when the specular reflection effect is predominant, but, for small targets, gives errors due to higher order scattering components. The numerical analysis of an idealized submarine shows that the established method is effectively applicable to large and complex-shaped underwater targets.

• Korean Circulation Journal
• /
• v.52 no.7
• /
• pp.544-555
• /
• 2022

Background and Objectives: The outcome benefits of β-blockers in chronic coronary artery disease (CAD) have not been fully assessed. We evaluated the prognostic impact of β-blockers on patients with chronic CAD after percutaneous coronary intervention (PCI). Methods: A total of 3,075 patients with chronic CAD were included from the Grand Drug-Eluting Stent registry. We analyzed β-blocker prescriptions, including doses and types, in each patient at 3-month intervals from discharge. After propensity score matching, 1,170 pairs of patients (β-blockers vs. no β-blockers) were derived. Primary outcome was defined as a composite endpoint of all-cause death and myocardial infarction (MI). We further analyzed the outcome benefits of different doses (low-, medium-, and high-dose) and types (conventional or vasodilating) of β-blockers. Results: During a median (interquartile range) follow-up of 3.1 (3.0-3.1) years, 134 (5.7%) patients experienced primary outcome. Overall, β-blockers demonstrated no significant benefit in primary outcome (hazard ratio [HR], 0.88; 95% confidence interval [CI], 0.63-1.24), all-cause death (HR, 0.87; 95% CI, 0.60-1.25), and MI (HR, 1.25; 95% CI, 0.49-3.15). In subgroup analysis, β-blockers were associated with a lower risk of all-cause death in patients with previous MI and/or revascularization (HR, 0.38; 95% CI, 0.14-0.99) (p for interaction=0.045). No significant associations were found for the clinical outcomes with different doses and types of β-blockers. Conclusions: Overall, β-blocker therapy was not associated with better clinical outcomes in patients with chronic CAD undergoing PCI. Limited mortality benefit of β-blockers may exist for patients with previous MI and/or revascularization.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.1
• /
• pp.14-19
• /
• 2012

Introduction: This study was conducted to evaluate ssrA expression resulting from adaptation of Escherichia coli (E. coli) to oral pathogens through signal exchange. Materials and Methods: Human cell lines Hep2 and HT29, wild-type E. coli (WT K-12), ssrA knock-out E. coli (${\Delta}K$-12), and Scleropages aureus (S. aureus) were used. A single culture consisting of Hep2, HT29, WT K-12, and ${\Delta}K$-12, and mixed cultures consisting of Hep2 and WT K-12, Hep2 and ${\Delta}K$-12, WT K-12 and S. aureus, ${\Delta}K$-12 and S. aureus, and Hep2, WT K-12, and S. aureus were prepared. For HT29, a mixed culture was prepared with WT K-12 and with WT K-12 and S. aureus. Total RNA was extracted from each culture with the resulting expression of ssrA, nuclear factor kappa-light-chain-enhancer of activated B cells (NF-${\kappa}B$), and p53 was evaluated by Reverse transcription polymerase chain reaction (RT-PCR). Results: The expression of ssrA in a single culture of WT K-12 was lower than that observed in the mixed culture of WT K-12 with S. aureus. Greater ssrA expression was observed in the mixed culture of WT K-12 with Hep2 than in the single culture of WT K-12. The expression of NF-${\kappa}B$ was higher in the mixed culture of Hep2 with ${\Delta}K$-12 than that in the mixed culture of Hep2 with WT K-12, and was lowest in the single culture of Hep2. The expression of ssrA was higher in the mixed culture of WT K-12 with Hep2 and S. aureus than in the mixed culture of WT K-12 with Hep2. Conclusion: These results suggest that ssrA plays an important role in the mechanism of E. coli adaptation to a new environment.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.357-365
• /
• 2000

Paneth cells have been suggested to contribute to the elimination of excess metals into the intestinal lumen. The purpose of this study wat to investigate the changes of the zinc pools in rats subjected to functional loading with zinc salt by mean of both light and electron microscopical autometallography (AMG). Wistar rats 4 were administrated with zinc chloride (20 mg/kg body weight) intraperitoneally dissolved in 1 ml distilled water. The control group received 1 ml saline IP. After further one hour the animals were transcardially perfused with 0.4% sodium sulphide dissolved in 0.1 M PB fellowed by 3% glutaraldehyde solution for 10 minutes. Pieces of ileum were frozen with solid $CO_2$ and sectioned on a cryostat. The sections $(20{\mu}m)$ were autometallographically developed. Sections selected for EM were reembedded on top of a blank Epon block, from which ultrathin sections (100 nm) were cut. The ultrathin sections were double stained with uranyl acetate (30 min) and lead citrate (5 min), then examined under electron microscope. Studies of comparable sections from control and zinc loaded animals with the AMG selenium method gave quite different results. The control animals demonstrated a weakly positive staining in the cytoplasm of the Paneth cells. In the electron microscope the AMG silver grains were found to be located in the cytoplasm, while the electron dense secretary granules and other cell organelles were void of staining. Few AMG grains were located at the apical surface of the Paneth cells. In sections from zinc loaded rats, the AMG grains were seen in abundance in the lumen of the Lieberkuhn crypts at light microscopic levels. At EM levels the zinc revealing silver grains were located in the cytoplasm as in the controls, but much more AMG grains were shifted into the secretary granules. Furthermore, profound AMG grains were found in the lumen of the crypts and surrounding vessels. And a few grains were seen in the endothelium. The AMG technique demonstrated a pattern of AMG grains in the Paneth cells that strongly suggests a transport of zinc ions through these cells.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.347-355
• /
• 2000

Zinc is one of the most abundant oligoelements in the living cell. It appears tightly bound to some metalloproteins and nucleic acids, loosely bound to some metallothioneins or even as free ion. Small amounts of zinc ions (in the nanomolar range) regulate a plentitude of enzymatic proteins, receptors and transcription factors, thus rolls need accurate homeostasis of zinc ions. Zinc is an essential catalytic or structural element of many proteins, and a signaling messenger that is released by neural activity at many central excitatory synapses. Growing evidences suggest that zinc may also be a key mediator and modulator of the neuronal death associated with transient global ischemia and sustained seizures, as well as perhaps other neurological disease stoles. Some neurons have developed mechanisms to accumulate zinc in specific membrane compartment ('vesicular zinc') which can be evidenced using histochemical techniques. Substances giving a bright colour or emitting fluorescence when in contact with divalent metal ions are currently used to detect them inside cells; their use leads to the so called 'direct' methods. The fixation and precipitation of metal ions as insoluble salt precipitates, their maintenance along the histological process and, finally, their demonstration after autometallographic development are essential steps for other methods, the so called 'indirect methods'. This study is a short report on the autometallograhical approaches for zinc detection in the central nervous system (CNS) by means of a modified selenium method.