• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.15-21
• /
• 2003

Polysulfone/organophilic layered silicate nanocomposites were prepared in the range of 0.25 to 9 wt% of organophilic-layered silicate by solution blend. Nano-hybridized films were cast from the blend solution. Exfoliation and intercalation of the polysulfone/organophiliclayered silicate nanocomposite films were confirmed by an X-ray diffractometer and a transmission electron microscope. Surface morphologies of polysulfone/organophilic layered silicate nanocomposite films were determined by a scanning electronic microscope and an atomic force microscope. When the organophilic layered silicate was added more than 1.5 wt%, the surface roughness (RMS) was rapidly increased because clusters of intercalated organophilic layered silicate particles existed on the polysulfone/organophilic-layered silicate film surface. Surface tension revealed an upward tendency over the contents of 1.5 wt% organophilic layered silicate in polysulfone/organophilic layered silicate nanocomposite. The change of surface morphology in polysulfone/organophilic layered silicate nanocomposite were affected by nano scale dispersed and intercalated organophilic layered silicate particles.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.1
• /
• pp.53-60
• /
• 2019

Objective : The purpose of this study was to determine the efficacy of intra-operative cell salvage system (ICS) to decrease the need for allogeneic transfusions in patients undergoing major spinal deformity surgeries. Methods : A total of 113 consecutive patients undergoing long level posterior spinal segmental instrumented fusion (${\geq}5$ levels) for spinal deformity correction were enrolled. Data including the osteotomy status, the number of fused segments, estimated blood loss, intra-operative transfusion amount by ICS (Cell $Saver^{(R)}$, $Haemonetics^{(C)}$, Baltimore, MA, USA) or allogeneic blood, postoperative transfusion amount, and operative time were collected and analyzed. Results : The number of patients was 81 in ICS group and 32 in non-ICS group. There were no significant differences in demographic data and comorbidities between the groups. Autotransfusion by ICS system was performed in 53 patients out of 81 in the ICS group (65.4%) and the amount of transfused blood by ICS was 226.7 mL in ICS group. The mean intra-operative allogeneic blood transfusion requirement was significantly lower in the ICS group than non-ICS group (2.0 vs. 2.9 units, p=0.033). The regression coefficient of ICS use was -1.036. Conclusion : ICS use could decrease the need for intra-operative allogeneic blood transfusion. Specifically, the use of ICS may reduce about one unit amount of allogeneic transfusion in major spinal deformity surgery.

• Safety and Health at Work
• /
• v.12 no.2
• /
• pp.238-243
• /
• 2021

Objectives: The aim of this study was to provide baseline data for the assessment of exposure to indium and to prevent adverse health effects among workers engaged in the electronics and related industries in Republic of Korea. Methods: Total (n = 369) and respirable (n = 384) indium concentrations were monitored using personal air sampling in workers at the following 19 workplaces: six sputtering target manufacturing companies, four manufacturing companies of panel displays, two companies engaged in cleaning of sputtering components, two companies dedicated to the cleaning of sputtering target, and five indium recycling companies. Results: The level of exposure to total indium ranged from 0.9 to 609.3 ㎍/m³ for the sputtering target companies; from 0.2 to 2,782.0 ㎍/m³ for the panel display companies and from 0.5 to 2,089.9 ㎍/m³ for the indium recycling companies. The level of exposure to respirable indium was in the range of 0.02 to 448.6 ㎍/m³ for the sputtering target companies; 0.01 to 419.5 ㎍/m³ for the panel display companies; and 0.5 to 436.3 ㎍/m³ for the indium recycling companies. The indium recycling companies had the most samples exceeding the exposure standard for indium, followed by sputtering target companies and panel display companies. Conclusions: The main finding from this exposure assessment is that many workers who handle indium compounds in the electronics industry are exposed to indium levels that exceed the exposure standards for indium. Hence, it is necessary to continuously monitor the indium exposure of this workforce and take measures to reduce its exposure levels.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.4
• /
• pp.19-23
• /
• 2007

The superconducting properties of several HTS coated conductors (CC), which had different tape structures, fabricated by KERI, X and Y institutes were compared. We have fabricated the $high-J_c$ SmBCO CC, which has 273.5 A/cm, $1.2MA/cm^2$ and 93.5 K for $I_C,\;J_C\;and\;T_{c-zero}$, respectively, using the EDDC (Evaporation using Drum in Dual Chambers) process. Both X and Y institutes CCs, however, were purchased. The n-values of KERI, X and Y institutes CCs are 58.5, 40.7 and 31.5 in $V=1{\sim}10{\mu}V$ criterion, respectively. The in-field properties of $I_C$ at 77K were investigated and the $J_C(B)/J_C(0G)$ at 0.5 T with $B{\perp}$ ab-plane are 0.31, 0.19 and 0.24 for KERI, X and Y institutes CCs, respectively. From the $I_C-{\theta}-B$ measurement, we observed that the ab-plane of ReBCO phase was tilted for the ab-plane of substrate in the KERI and X institutes CCs. The tilted angle is about 5 degree. We confirmed that the peak shift (as an inclined texture) was observed by X-ray (102) pole figures of the SmBCO for the KERI CC.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.9 no.1
• /
• pp.8-13
• /
• 2008

Objectives : This study was to investigated the correlation between average temperature & precipitation and pattern identification of the patients with stroke. Methods : 115 stroke patients within 30days of onset were registered during the study period. Pattern identification of stroke was classified into Fire and heat, Turbid phlegm and others. We took the mean of average temperature according to pattern identification and analyzed pattern identification into two groups according to climatological normal of average temperature in Seoul. We also analyzed pattern identification into two groups according to existence of precipitation. Results : Heat and fire, and other type of pattern identification had high frequency when average temperature was higher than 12.2℃. And there was no correlation between precipitation and pattern identification of stroke.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.304-304
• /
• 2020

항만구조물의 방파제 또는 방파호안의 마루높이는 배후지역의 활용도에 따라 내습파의 월파로 인한 전달파 또는 월파량에 의해 결정되기 때문에 월파량산정은 항만구조물을 설계함에 있어서 주요한 설계인자이다. 그동안 국내에서는 항만구조물 설계시 주로 외국의 기준이나 기법을 활용하고 있는 실정이다. 국내 항만설계기준에서는 Goda도표를 이용하여 직립제 및 방파호안에 대한 월파량 산정방법을 제시하고 있으나, 도표축이 log로 되어 있어 내삽 또는 외삽시 사용자에 따라 월파량 차이가 발생할 수 있다. 국내의 해역특성 및 최근 설계동향을 반영한 월파량 산정식의 개발이 필요하고, 동일조건에 대한 동일한 월파량 산정결과가 도출될 수 있어야 한다. 최근의 대표 연구성과인 EurOtop(2007)과 같이 지수함수의 형태로 월파량 산정식을 제시하고자 한다. 경사식구조물의 평균월파량 산정식 도출을 위해 적용한 구조물 위치에서의 수심(d_t)은 0.40m, 0.55m, 0.70m 이다. 적용수심을 서로 다르게 한 것은 기존의 대부분의 연구에서 적용하지 않았던 구조물 위치에서의 쇄파조건을 고려하기 위한 것이다. 실험파는 Bretschneider-Mitsuyasu 주파수 스펙트럼을 사용한 불규칙파를 적용하였다. 본 연구에서는 주 피복재로 TTP를 대상으로 하였고, 주기 및 파고를 다양한 조건에서 수리실험을 수행하였다. 본 연구의 실험결과는 월파량 계측을 통해 분석된 평균 월파량을 적절한 산정식으로 나타내기 위해 EurOtop(2007)의 기존 월파량 산정식 형태에 대입하여 비교하여 분석하였다. 따라서, 본 논문은 월파량 산정식 제시를 통해 보다 합리적인 항만구조물의 마루높이 산정이 가능하게 하고, 또한 월파량 산정과 관련된 실험자료 구축을 통해 신뢰성해석 자료 및 수치모형의 검증 자료로 활용될 수 있을 것으로 판단된다.

• Journal of Families and Better Life
• /
• v.32 no.2
• /
• pp.99-116
• /
• 2014

Domestic PB products have emerged and been distributed by hypermarkets, department stores, convenience stores, as well as TV home shopping channels and Internet shopping malls. However, the fierce competition among the distributors due to the emergence of the PB products have caused the diversion of consumers' recognition to be reduced weight and volume as well as had the effect of misleading consumers about the prices. The width of the PB product price's up and down is larger than the width of the NB product. Thus, following consumers' purchases of PB products, there has been an increasing number of consumer complaints. In order to research consumers' recognition of PB products and to examine how consumers' recognition and information search comparative to PB products affect consumers' dissatisfaction, an online survey targeted consumers with experience purchasing PB products. This study was conducted and analyzed using SPSS 19 Statistics. The findings can be summarized as follows. Even though more consumers who frequently purchased and used the PB products, the more they compared with information search comparative to the NB product and then purchased the PB product. We investigated the result that the relevant variables of consumer complaints have some relative influence in the purchasing of PB products. There will be a higher probability o the group having high recognition about price and safety not making consumer complaints in comparison with the probability of other consumers making complaints after the purchase of a PB product. Therefore, based on the results of this study, companies need to build a system so that they can figure out consumers' needs in order to prevent the occurrence of consumer complaints related to the products of distribution companies' brands. By means of the system, it is also necessary for companies to collect consumer complaints and analyze them by category. Then they eventually should develop a consumer-centered management system which may contribute to quality improvement, product development and the reduction of consumer complaints.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.785-792
• /
• 2005

This study is to examine the influence of defective grain shape of coarse aggregate and lowered fineness modulus of fine aggregate on the characteristics of high flowing concrete. The flow ability and compact ability of high flowing concrete was examined using fine aggregate, varying its fineness modulus to 2.0, 2.5, 3.0, and 3.5, and coarse aggregate with before and after grain shape improvement. Also the influence of fineness modulus of fine aggregate and grain shape of coarse aggregate on dispersion distance of particles of aggregate was examined by relatively comparing the dispersion distance between particles of aggregate. According to the experimental result, minimum porosity when mixing fine aggregate and coarse aggregate was shown in order of fineness modulus of fine aggregate, 3.0, 2.5, 2.0, 3.5, regardless of the improvement of grain shape. So when the fineness modulus is bigger or smaller than KS Standard $2.3\~3.1$, the porosity increased. When the spherical rate of the grain shape of coarse aggregate unproved from 0.69, a disk shape to 0.78 sphere shape, the rate of fine aggregate, which represents minimum porosity, decreased $6\%$ from $47\%\;to\;41\%$. The 28 days compressive strength according to fineness modulus of fine aggregate increased about 3 ma as the fineness modulus increased from 2.0 to 2,5, and 3.0. However, the 28 days compressive strength decreased about 9 ma at 3.5 fineness modulus as compared with 3.0 fineness modulus. The improvement of grain shape in coarse aggregate and increase of fineness modulus in fine aggregate made the flow ability, compact ability, and V-rod flowing time improve. Also the fineness modulus of fine aggregate increased the paste volume ratio when a higher value was used within the scope of KS Standard $2.3\~3.1$.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.433-444
• /
• 1993

Electrum (32~73 atom. % Ag)-sulfide mineralization of the Bodeok mine in the Boseong area was deposited in two stages of mineralogically simple, massive quartz veins that fill the fractures along fault shear zones in Precambrian gneiss. Radiometric dating indicates that mineralization is Late Jurassic age ($155.9{\pm}2.3$ Ma). Fluid inclusion data show that ore mineralization was formed from $H_2O-CO_2$ fluids with variable $CO_2$ contents ($X_{CO_2}=0.0$ to 0.7) and low salinities (0.0 to 7.4 wt. % eq. NaCl) at temperatures between $200^{\circ}$ and $370^{\circ}C$. Evidence of fluid unmixing ($CO_2$ effervescence) indicates pressures up to 1 kbar. Gold-silver deposition occurred later than base-metal sulfide deposition, at temperatures near $250^{\circ}C$ and was probably a result of cooling and decreasing sulfur activity caused by sulfide precipitation and/or $H_2S$ loss (through fluid unmixing). Calculated sulfur isotope compositions of ore fluids (${\delta}^{34}S_{{\Sigma}S}=1.7$ to 3.3‰) indicate an igneous source of sulfur in hydrothermal fluids. Measured and calculated O and H isotope compositions of ore fluids (${\delta}^{18}O_{water}=4.8$ to 7.2‰, ${\delta}D_{water}=-73$ to -76‰) indicate that mesothermal auriferous fluids at Bodeok were likely mixtures of $H_2O-rich$, isotopically evolved meteoric waters and magmatic $H_2O-CO_2$ fluids.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.377-385
• /
• 2011

This study was carried out to investigate quality characteristics of dry-cured hams in the domestic market. Two kinds of dry-cured hams were processed with pork leg (T1) and pork neck (T2). Five 24-month dry-cured legs (T1, 5.3-6.1 kg) and twenty 4-month dry-cured pork necks (T2, 1.5-1.9 kg) were used in this experiment. They were stored at $4^{\circ}C$ chilling room and quality characteristics were investigated. Moisture content, water activity, cholesterol content, CIE $L^*$, VBN, total plate counts and lactic acid bacteria of T1 were significantly higher (p<0.05) than those of T2, whereas fat content, ${NO_2}^-$, CIE $a^*$, TBARS and Warner-Bratzler shear force values of T2 were significantly higher (p<0.05) than those of T1. In fatty acid compositions, palmitoleic acid and stearic acid in T2 were significantly higher (p<0.05) than T1, however, oleic and linoleic acid in T2 was significantly lower (p<0.05) than T1. In free amino acids, the total content and individual content of asparagin, leucine and phenylalanine in T1 were higher than those of T2 (p<0.05). The aroma score of T2 was higher than that of T1 in sensory evaluation (p<0.05). In conclusion, two kinds of dry-cured hams were different in their final characteristics and could enhance the consumer's appeal of pork meat in Korean market.