Journal of the Institute of Electronics Engineers of Korea SC
/
v.46
no.3
/
pp.44-51
/
2009
It is very important to verify generated setup errors in cancer therapy by using a high energy radiation and to perform the precise radiation therapy. Specially, the verification of treatment position is very crucial in special therapies like fractionated stereotatic radiotherapy (FSRT). The FSRT uses normally high-dose, small field size for treating small intracranial lesions. To estimate the developed FSRT system, the isocenter accuracy of gantry, couch and collimator were performed and a total of inaccuracy was less than ${\pm}1mm$. Precise beam targeting is crucial when using high-dose, small field size FSRT for treating small intracranial lesions. The EPID image of the 3mm lead ball mounted on the isocenter with a 25mm collimator cone was acquired and detected to the extent of one pixel (0.76mm) after comparing the difference between the center of a 25mm collimator cone and a 3 mm ball after processing the EPID image. In this paper, the radiation treatment efficiency can be improved by performing precise radiation therapy with a developed video based EPID and FSRT at near real time
Background: The purpose of this study was to assess the feasibility of deep inspiration breath-hold (DIBH) based volumetric modulated arc therapy (VMAT) for locally advanced left sided breast cancer patients undergoing radical mastectomy. DIBH immobilizes the tumor bed providing dosimetric benefits over free breathing (FB). Materials and Methods: Ten left sided post mastectomy patients were immobilized in a supine position with both the arms lifted above the head on a hemi-body vaclock. Two thermoplastic masks were prepared for each patient, one for normal free breathing and a second made with breath-hold to maintain reproducibility. DIBH CT scans were performed in the prospective mode of the Varian real time position management (RPM) system. The planning target volume (PTV) included the left chest wall and supraclavicular nodes and PTV prescription dose was 5000cGy in 25 fractions. DIBH-3DCRT planning was performed with the single iso-centre technique using a 6MV photon beam and the field-in-field technique. VMAT plans for FB and DIBH contained two partial arcs ($179^{\circ}-300^{\circ}CCW/CW$). Dose volume histograms of PTV and OAR's were analyzed for DIBH-VMAT, FB-VMAT and DIBH-3DCRT. In DIBH mode daily orthogonal ($0^{\circ}$ and $90^{\circ}$) KV images were taken to determine the setup variability and weekly twice CBCT to verify gating threshold level reproducibility. Results: DIBH-VMAT reduced the lung and heart dose compared to FB-VMAT, while maintaining similar PTV coverage. The mean heart $V_{30Gy}$ was $2.3%{\pm}2.7$, $5.1%{\pm}3.2$ and $3.3%{\pm}7.2$ and for left lung $V_{20Gy}$ was $18.57%{\pm}2.9$, $21.7%{\pm}3.9$ and $23.5%{\pm}5.1$ for DIBH-VMAT, FB-VMAT and DIBH-3DCRT respectively. Conclusions: DIBH-VMAT significantly reduced the heart and lung dose for left side chest wall patients compared to FB-VMAT. PTV conformity index, homogeneity index, ipsilateral lung dose and heart dose were better for DIBH-VMAT compared to DIBH-3DCRT. However, contralateral lung and breast volumes exposed to low doses were increased with DIBH-VMAT.
Annual Conference on Human and Language Technology
/
1992.10a
/
pp.367-375
/
1992
한국어는 다른 언어와는 달리 초성, 중성, 종성의 자소가 모여서 한 음절을 이룬다. 음절을 이루는 자소는 그 발생의 확률적 성질에 따라 확률변수로 간주된다. 음절 안에서 자소간의 발생의 상관관계는 자소간 조건부 확률 및 엔트로피로 표시된다. 음절이 모여서 단어를 이루고 단어를 이루는 음절은 그 발생의 확률적 성질에 따라 확률변수로 간주된다. 한국어 단어안에서 음절간의 발생의 상관관계는 음절간 조건부 확률 및 엔트로피로 표시된다. 수 있다. 그런데 가능한 음절의 종류가 매우 많기 때문에 음절 발생의 상관관계를 표시하는 지표로서 음절간 조건부 확률 대신 초성, 중성, 종성 단위의 조건부 확률을 사용하는 것이 음절간의 발생의 상관관계를 표시하는데 효과적이다. 이러한 한국어의 정보이론적 연구를 위하여서는 기초자료로서 한국어 단어의 빈도분포가 필요하다. 한국어 단어의 빈도분포의 포괄적인 조사는 1956년의 "우리말 말수 사용의 잦기 조사"가 유일한 실정이다. 시간 경과에 따른 한국어의 정보이론적 특성 변화의 분석을 위하여서는 한국어 단어 빈도의 주기적인 조사가 필요하다. 한국어에서 초성, 중성, 종성단위의 정보이론적 연구결과는 한국어 음성인식 및 함성, 자연언어처리, 암호법, 언어학, 음성학, 한국어부호 표준화 연구등에 이용될 것으로 기대된다. 남북한의 언어는 분단이 지속됨에 따라 상호 이질화가 진행되고 있다. 이러한 이질화를 극복하려는 부분적인 노력으로 남북한 언어의 한국어 영문표기의 단일화 등이 있었다. 이러한 노력에 병행하여 남한과 북한의 언어에 대한 정보이론적 비교 연구도 있어야 할 것이다. 정보를 효과적으로 캐싱할 수 있도록 인접한 데이터를 클러스터링해서 브로드캐스팅하여 이동 호스트의 구성 시간(setup time)을 최소화하였다. 그리고, 맨하탄거리(Manhattan Distance)를 사용해서 위치 의존 질의에서 사용하는 데이타를 캐싱하고 질의를 처리하는 방법을 제안한다. 맨하탄 거리를 이용해서 캐싱하면 도로에 인접해서 위치한 데이타를 효과적으로 캐싱할 수 있다. 또한, 거리 계산 방법으로 맨하탄 거리를 사용하면 도심에서 실제 이동 거리와 비슷한 값을 알 수 있고, 직선 거리 계산식에 비해서 계산식도 간단하기 때문에 시스템 계산량도 줄일 수 있다. 기준으로 라이신 부산물은 어분 단백질을 40%까지 대체가 가능하였으며, 아울러 높은 라이신 부산물의 대체 수준에 있어서 사료효율과 단백질 전환효율을 고려한다면 아미노산 첨가(라이신과 아르지닌)와 중화 효과에 좋은 결과가 있을 것으로 사료된다.의한 적정 양성수용밀도는 각고 5~6cm 크기의 경우 10~15개체가 적합하였다. 수증별 성장은 15~20 m 수층에서 빨랐으며, 성장촉진과 폐사를 줄이기 위해서는 고수온이 지속되는 7~10월에는 20~30m수층으로 채롱을 내려 양성하고 그 외 시기에는 15 m층 내외가 좋은 것으로 나타났다. 상품으로 출하 가능한 크기 인 각고 10 cm이상, 전중량 140 g 내외로 성장시 키기까지는 채묘후 22개월이 소요되었고, 출하시기는 전중량 증가가 최대에 이르는 3월에서 4월 중순이 경제적일 것으로 판단된다.er 90 % of good relative dynamic modulus of elasticity due
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2013.10a
/
pp.553-555
/
2013
Game Rating Board(GRB) of Korea set up in 29 October, 2006 has been 7th years and it will disappear in 23 November, 2013. For the first time the 'GRB' of Korea has the goal which held the nonofficial transfer of rating classification for game. But it had the justification which become more distant from the nonofficial transfer due to the affairs of 'See Story' in August, 2006. As a result, because of rapid normalization of game rating rather than the systematic transfer from 'Video Rating Board' of Korea cause no preparation of scientific professional rating review. It showed the entry-level appearance though stressing profession from the beginning of setup. Specially more transaction expense were increased because of no consistency and predictability for game review. However, it could be overcome by preparation for definite global standard and scientific rating system. Consequently technological possibility of BMM Korea based on 'Gaming Laboratory Institute(GLI)' standard expected to be alternative in the technical review of the adult arcade game.
The traffic on the Internet has been growing exponentially for some time. This growth is beginning to stress the current-day routers. However, switching technology offers much higher performance. So the label switching network which combines IP routing with switching technology, is emerged. EspeciaJJy in the data driven label switching, flow classification and cache table management are needed. Flow classification is to classify packets into switching and non-switching packets, and cache table management is to maintain the cache table which contains information for flow classification and label switching. However, the cache table management affects the performance of label switching network considerably as well as flowclassification because the bigger cache table makes more packet switched and maintains setup cost lower, but cache is restricted by local router resources. For that reason, there is need to study the cache replacement scheme for the efficient cache table management with the Internet traffic characterized by user. So in this paper, we propose several cache replacement schemes for label switching network. First, without the limitation at switching capacity in the router. we introduce FIFO(First In First Out). LFC(Least Flow Count), LRU(Least Recently Used! scheme and propose priority LRU, weighted priority LRU scheme. Second, with the limitation at switching capacity in the router, we introduce LFC-LFC, LFC-LRU, LRU-LFC, LRU-LRU scheme and propose LRU-weighted LRU scheme. Without limitation, weighted priority LRU scheme and with limitation, LRU-weighted LRU scheme showed best performance in this paper.
In this study, we developed an experimental method of the Charles' law applicable to school. Science textbooks and literatures on this principle were analyzed to extract factors utilized in organizing the experimental setup and method. A combined structure such as with a vial and a glass tube, the former of which is for deciding the total volume and the latter of which is for easy measurement of volume, was better in measurement of volume with temperature rather than a simple structure such as syringe. Use of graduated cylinder as a water bath to control the temperature showed advantage in cooling time than using other bath of larger volume such as a beaker. A liquid drop was used as a plug in the glass tube. This plug has little resistance with the glass wall when the gas volume changes. Water as a liquid drop in the glass tube had a significant effect in volume change of gas due to evaporation, especially in the beginning of the measurement. Glycerol showing negligible effect in volume change was used. This method took about one hour and produced a good linear relationship between the temperature and volume of gas with $R^2$ = 0.999 and absolute zero temperature = $-216.7\;{^{\circ}C}$. The Charles' law experiment developed in this study can be performed with appropriate adjustment of procedure considering the purpose of the curriculum of science and chemistry subject at each school level.
Kim, Jae-Chang;Kyeong, Sunghyon;Lee, Jong Doo;Park, Hae-Jeong
Investigative Magnetic Resonance Imaging
/
v.17
no.3
/
pp.169-180
/
2013
Purpose : The purpose of this study was to setup a concuurent transcranial magnetic stimulation (TMS)-functional MRI (fMRI) system for understanding causality of the functional brain network. Materials and Methods: We manufactured a TMS coil holder using nonmagnetic polyether ether ketone (PEEK). We simulated magnetic field distributions in the MR scanner according to TMS coil positions and angles. To minimize image distortions caused by TMS application, we controlled fMRI acquisition and TMS sequences to trigger TMS during inter-volume intervals. Results: Simulation showed that the magnetic field below the center of the coil was dramatically decreased with distance. Through the MR phantom study, we confirmed that TMS application around inter-volume acquisition time = 100 miliseconds reduced imaging distortion. Finally, the applicability of the concurrent TMS-fMRI was tested in preliminary studies with a healthy subject conducting a motor task within TMS-fMRI and passive motor movement induced by TMS in fMRI. Conclusion: In this study, we confirmed that the developed system allows use of TMS inside an fMRI system, which would contribute to the research of brain activation changes and causality in brain connectivity.
The RSA public key encryption algorithm, a few, key generation, factoring, the Euler function, key setup, a joint expression law, the application process are serial indexes. The foundation of such algorithms are mathematical principles. The first concept from mathematics principle is applied from how to obtain a minority. It is to obtain a product of two very large prime numbers, but readily tracking station the original two prime number, the product are used in a very hard principles. If a very large prime numbers p and q to obtain, then the product is the two $n=p{\times}q$ easy station, a method for tracking the number of p and q from n synthesis and it is substantially impossible. The RSA encryption algorithm, the number of digits in order to implement the inverse calculation is difficult mathematical one-way function and uses the integer factorization problem of a large amount. Factoring the concept of the calculation of the mod is difficult to use in addition to the problem in the reverse direction. But the interests of the encryption algorithm implementation usually are focused on introducing the film the first time you use encryption algorithm but we have to know how to go through some process applied to the field work This study presents a field force applied encryption process scheme based on public key algorithms attribute diagnosis.
Journal of the Korean Academy of Esthetic Dentistry
/
v.27
no.2
/
pp.82-96
/
2018
3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.
Journal of the Korean Society of Marine Environment & Safety
/
v.28
no.7
/
pp.1252-1258
/
2022
The exhaust gas from the marine engines include a quantity of water vapor and particulate matter. The total particulate matter includes filterable particulate matter (FPM) and condensable particulate matter (CPM) that condense after releasing into the atmosphere. The portion of CPM is higher than that of FPM that is removable through the filter before discharging. An experimental setup for waste heat and water recovery and removal of CPM in the exhaust gas was tested using an industrial gas boiler in the laboratory. The water and CPM in the exhaust gas were removed through the first stage of cooling method and further removed through the second stage of absorption method. The efficiencies of water recovery were 73% after the first stage of cooling method and 90% after the second stage of absorption method. At the same time, the CPM was removed by 80-90% through the processes. The waste heat recovered could be used to process heat, and the water recovered could be used to process water in the ship. Furthermore, the CPM, which is a major source of the particulate matter but not subject to administrative regulation, could be removed effectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.