• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.219-225
• /
• 2008

Evaluating and designing secondary clarifier require to define characteristics of influent MLSS (Mixed Liquor Suspended Solids). In this study, bioflocculation and settling characteristics for MLSS from a Biological Nutrient Removal (BNR) plant located in near Seoul were measured. MLSS concentrations in bioreactor were about 2,500mg/L in summer and about 4,000mg/L in winter, respectively. Tests showed that there was not much bioflocculation occurred in secondary clarifier. Average ESS/DSS (Effluent Suspended Solids/Dispersed Suspended Solids) was 100%. From the settling tests, ZSV (Zone Settling Velocity) and settling constant (n) in Vesilind equation were estimated at different MLSS temperatures. SVI (Sludge Volume Index) and SSVI (Stirred Sludge Volume Index) were also measured at different temperatures. It was found that ZSV was positively correlated with temperature and n was inversely proportional to temperature. SVI and SSVI had very similar values at about $25^{\circ}C$ of MLSS, However, SVI had more than 2 times higher values than SSVI at below $20^{\circ}C$ of MLSS. Temperature effect must be considered to design and evaluate secondary clarifier.

• Journal of Environmental Impact Assessment
• /
• v.2 no.1
• /
• pp.57-63
• /
• 1993

An analysis for particle settling effects via of plume centerline tilted exponentially under the influence of panicle settling velocity is carried out for particle of $30{\mu}m$ diameter with $1g/cm^3$ density and 0.02m/s settling velocity corresponding to its particle characteristic according to various wind speeds, atmospheric stabilities. Characteristic analysis of surface concentration distribution simulated by Lagrangian model also are carried out under the influence of plume centerline tilted exponentially at 10m stack height emitted 200 particles per second. This study reveals that plume centerline at the nearby source is sharply tilted exponentially under the condition of stable, weakly wind speed, therefore the lower concentration at the nearby source, the higher concentration at the downwind distance far away from source than actual one is brought out, if not apply the effect of plume centerline tilted exponentially to diffusion Model.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.8-13
• /
• 2023

High bandwidth memory a core technology of the future memory semiconductor industry, is attracting attention. Temporary bonding and debonding process technology, which plays an important role in high bandwidth memory process technology, is also being studied. In this process, total thickness variation is a major factor determining wafer performance. In this study, the reliability of the equipment measuring total thickness variation is identified, and the servo motor settling, and wafer total thickness variation measurement accuracy are analyzed. As for the experimental variables, vacuum, acceleration time, and speed are changed to find the most efficient value by comparing the stabilization time. The smaller the vacuum and the larger the radius, the longer the settling time. If the radius is small, high-speed rotation performance is good, and if the radius is large, low-speed rotation performance is good. In the future, we plan to conduct an experiment to measure the entire of the wafer.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.251-261
• /
• 2006

The purpose of this study is to quantitatively estimate the settling property for fine-cohesive sediments in Keum Estuary and to evaluate the spatial variation by analyzing and comparing the local and seasonal variation of the settling properties in Keum Estuary with that of the settling properties in the other sites. After the spatial variation of physico-chemical properties such grain size distribution, the percentage of organic contents, mineralogical composition etc is investigated through experiments and analyses, interrelation between the physico-chemical properties and settling velocities and effect that the physico-chemical properties have on the quantitative variation of settling velocities were also analyzed in this study. Experimental results of settling tests shows that settling velocities of Keum Estuary mud vary in the range of two orders of magnitude (from 0.01 to 1mm/sec) over the corresponding concentration range of 0.1 to 80 g/L, and a feature of settling velocity profile is quite different in quantity as compared to those of previous studies with mud of other regions: Saemankuem, Tampa Bay, Sevem Estuary and lake Okeechobee. However, their local and seasonal variabilities within Keum Estuary appear to be insignificant.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.557-565
• /
• 2006

Proper operation of clarifier partly depends on outlet conditions. Effluent has to be uniformly withdrawn to prevent scouring of settled sludge and carry over of settling sludge from the clarifier. In this paper, 3-D numerical model was employed to analyze the flow and settling performance of the rectangular clarifier. There were two simulation conditions of which in the same clarifier, the first one was assumed to have a 11.5 meter weir length and the second has 8.5 meters. Shape, location and placement of the weir structure were different, but both of those outlets meet weir loading design criteria. Simulation results indicate that clarifier with longer weir generally gave strong and unstable currents at the mid-stream where the weir starts while in the clarifier with short and relatively simple weir, uniform and stable flow was observed in most parts of the settling zone, and especially at the weir region. These flow conditions affected settling performance. Effulent SS concentration from clarifier equipped with the long and complicated placement of weir was 24.5 mg/L, but 7.0 mg/L from the clarfieir having short weir length. From this study, it can be concluded that as reported from other studies, weir loading does not guarantee settling performance and 3-D numerical model can be a useful tool for determining and validating outlet structure.

• Journal of Agricultural Extension & Community Development
• /
• v.29 no.2
• /
• pp.99-110
• /
• 2022

This study aims to examine the characteristics of farming settlement in young farmers. In order to analyze the effect of each characteristic on young farmers' intention for settling into farming, an ordered logit model was employed. As for the individual characteristics affecting their intention for settling into farming, age and the highest education level showed a positive effect, while family-run farming had a negative effect, which was found statistically significant. For the financial characteristics, farm income had a statistically significant positive effect. On the other hand, the social and policy characteristics did not show any statistically significant effect.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.423-435
• /
• 2017

Settling Basins are one of the most important and popular methods for removal of suspended sediments irrigation and drainage networks or power canals taking off from an alluvial river and wastewater treatment plant. Improving the performance and so increasing sediment removal efficiency of settling basins by an alternative method is necessary. In the present work, the effect of baffle and its angle of attack with the flow (${\theta}$) on the sediment removal efficiency is investigated by conducting a series of experiments on a straight canal with 8 m length, 0.3 m width and 0.5 m height and 3 m length of basin equipped with an adjustable glass baffle. A numerical analysis has been carried out using ANSYS Fluent 3D software (a general purpose computational fluid dynamics simulation tool) for three Froude numbers from the experiments. The numerical and experimental results were found to match reasonably well.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2396-2400
• /
• 2008

The motion of small heavy particles in homogeneous isotropic turbulence in the present of gravity is investigated using Direct Numerical Simulations (DNS) at moderate Reynolds number. The Lagrangian velocity and acceleration statistics of particles and of flow for a wide range of Stokes number, defined as the ratio of the particle response time to Kolmogorov time scale of turbulence, were obtained for the direction of the gravity and normal direction, respectively. It is found that particles lose their correction faster than the case without gravity. Then, a significant increase in the average settling velocity was observed for a certain range of Stokes number. Our focus is placed on gravitational effect on very small particles. Our simulations show that as the Stokes number reduces to zero, their mean settling velocity approaches the terminal velocity in still fluid.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.273-280
• /
• 2006

The sludge settleability is a key factor for operating activated sludge process as well as BNR (biological nutrient removal) process, because the poor sludge settling causes an increase of suspended solid in the effluent. In order to improving the sludge settleability, a settling agent such as iron dust can be applied. In this study, the effect of sludge settleability on the performance of DNR (Daewoo nutrient removal) process was investigated with GPS-X, which is the popular wastewater treatment process model program, and the result of modeling was verified with operating lab-scale DNR process. As a result, if the sludge blanket keeps stable in the secondary settling tank, the effluent quality is similar in spite of different SVI values. And in case of the good sludge settleability, short HRT or long SRT increased the biomass concentration in the bioreactor, and improved the pollutant removal efficiency. In spite of daily influent changing, the good sludge settleability also guaranteed the stable effluent quality. And the results of the lab-scale DNR process experiment could support the simulated results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.166-169
• /
• 2003

In this study, we evaluated the characteristics by the addition of 3 different kinds of nonionic surfactant to improve the dispersion stability of slurries. Slurry stability is an issue in any industry in which settling of particles can result in poor performance. So we observed the variation of particle size and settling rate when the concentration and addition time of surfactant are changed. When the surfactant is added after milling process, the particle size and pH became low. It is supposed that the particle agglomeration was disturbed by adsorption of surfactant on alumina abrasive. The settling rate was relatively stable when nonionic surfactant is added about 0.1~1.0 wt%. When molecular weight(MW) is too small like Brij 35, it was appeared low effect on dispersion stability. Because it can't prevent coagulation and subsequent settling with too small MW. The proper quality of MW for slurry stability was presented about 500,000. Consequently, the addition of nonionic surfactant to alumina slurry has been shown to have very good effect on slurry stabilization. If we apply this results to copper CMP process, it is thought that we will be able to obtain better yield.