• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.611-617
• /
• 2003

This study was performed to develop the method for producing industrial coal sources by cleaning Korean anthracite. Laboratory hindered-settling separation column was set and three coal samples were used for tests. Tests were conducted to evaluate the effects of the major operating variables, teeter water flow rate and relative column pressure (set point). Additional tests were performed to elevate the yield and properties of the products using air bubble injecting process. In results, nice products were obtained with high teeter water flow rate and air bubble injection. Also, model of continuous hindered-settling separation process was established to assist the evaluation of the equipment and several operating variables, such as dispersion, teeter water flow rate, feeding rate, etc.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.355-358
• /
• 2002

A sediments are Integral called as gravel, sand, clay, mineral materials which are settling in bottom layer of reservoir, stream, and oceans from land. In practical problems relations of sediments are flood by decreed of flow capacity and down of water quality. Dredged sediments are composed with constructed material and variety of pollutant compounds. Therefore, it is very much of cost effects in nationally, if development for use of constructed material separated only constructed material within sediments. And it will be continue to the dredge operation of stream sediment for retrofit of water environment and sustainable's after the years. The following results could be obtained : In case of high concentration sediments, sample for design of CDF was shown property of flocculent settling. Assuming that average inflow rate is 1, 000㎥/hr, mean residence time( $T_{d}$), average ponding depth( $H_{pd}$ ), and design surface area for flocculent settling( $A_{df}$ ) were 5 hr, 0.6m, and 15, 750 $m^2$ respectivelyrespectivelyy

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.137-139
• /
• 2007

In optical disk drives, a conventional control method in the presence of surface defect is holding the previous tracking control command. It is known that the method has a long settling time. This paper proposes a new control method which reduces the settling time. An optical head generally has coupled dynamics between focusing and tracking servo system. We present how to compensate the coupled dynamics so that reduced settling time is achieved. It is verified by experiments that the proposed method brings an improved performance in the presence of surface defect as well as in the normal operating condition.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.423-435
• /
• 2017

Settling Basins are one of the most important and popular methods for removal of suspended sediments irrigation and drainage networks or power canals taking off from an alluvial river and wastewater treatment plant. Improving the performance and so increasing sediment removal efficiency of settling basins by an alternative method is necessary. In the present work, the effect of baffle and its angle of attack with the flow (${\theta}$) on the sediment removal efficiency is investigated by conducting a series of experiments on a straight canal with 8 m length, 0.3 m width and 0.5 m height and 3 m length of basin equipped with an adjustable glass baffle. A numerical analysis has been carried out using ANSYS Fluent 3D software (a general purpose computational fluid dynamics simulation tool) for three Froude numbers from the experiments. The numerical and experimental results were found to match reasonably well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.42-45
• /
• 2002

In the two-mass motor drive system driving a load through a flexible shaft or transmission system, a shaft torsional vibration is often generated. The overshoot of the motor drive system easily causes vibration. In this case I-PD controller has been generally used in speed control, because of the simplicity of structure. This paper using an analytical pole assignment design, proposes the overshoot formulas, and the settling time formula. The objective of this paper is to provide a design method of I-PD controller by using overshoot formulas, and settling time formula. The simulation results show that we can design the controller with desired overshoot and settling time.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.28-33
• /
• 2007

최근 Hard Disk Drive(HDD)는 컴퓨터 산업의 발달과 함께 멀티미디어 어플리케이션의 요구에 따라 대용량화 추세에 있다. 이러한 대용량 HDD 는 고밀도, 고정밀의 track 정보가 필요하게 되고, 이는 HDD 생산에 고속, 고정밀의 Servo Track Writer(STW)를 필요로 하게 되었다. 그러나, 기존의 STW 는 PID 제어기에 공진 모드 제거를 위한 notch filter 를 사용하기 때문에 고속화에는 한계가 있어 track 정보를 기록하는 생산시간의 단축이 어렵다. 본 논문에서는 이를 위하여 기존의 STW 에 공진 모드의 여기를 최소화하기 위해 제어 입력의 profile 을 설계하는데 convex optimization 을 이용한 최적화 기법을 사용하였다. 이렇게 설계된 제어 입력은 플랜트의 공진 모드가 존재하는 주파수 대역에 에너지를 최소화시켜 공진 모드의 영향을 적게 받는다. 그 결과로 빠른 settling time 과 위치 정밀도가 향상된다. 그 효과는 모의 실험을 통해 검증하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.154-159
• /
• 2001

Nakdong estuary is located at south-eastern coast of the Korea. A lot of sediment from upper river was deposited at this area. It has caused many problems such as changes in topography and tidal current. In this paper, field observation data on tidal currents and sediments were investigated as well as historical topographic changes by dredging and reclamation of the foreshore. Then, the numerical model considered the settling velocity of the suspended solids according to the particle size was applied to examine the characteristic of deposition. The results are as follows : 1. Changes of characteristics of deposition were caused by topographic changes of Nakdong estuary 2. Characteristics of deposition were influenced by river plume and tidal currents. 3. Numerical model which considers settling velocity reappeared distribution of deposition by particle-size. 4. Used model is only resonable for discussion in the quality, so, it is strongly suggested that the new model development is needed including the quatitative deposition processes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.538-541
• /
• 2005

Most realistic control systems contain nonlinearities of some form. One nonlinearity commonly found in control systems is a saturating element. If integral control is applied to such a system to eliminate steady state error, an undesired side effect known as integrator windup may occur when lage setpoint changes are made. This effect leads to a characteristic step response with a large overshoot and a very high settling time. To avoid this situation, many different anti-windup strategies have been suggested. But existing strategies remain over shoot and high settling time. This paper proposes a new anti-windup strategy for PI speed controllers. When the speed control system is changed P controller to PI controller. Integrator has an appropriate initial value. This value results over shoot and high settling time. The SIMULINK/MATLAB-based comparative simulation results and experiment results of speed controller have shown its superior control performance to that of a proposed anti-windup speed controller.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2396-2400
• /
• 2008

The motion of small heavy particles in homogeneous isotropic turbulence in the present of gravity is investigated using Direct Numerical Simulations (DNS) at moderate Reynolds number. The Lagrangian velocity and acceleration statistics of particles and of flow for a wide range of Stokes number, defined as the ratio of the particle response time to Kolmogorov time scale of turbulence, were obtained for the direction of the gravity and normal direction, respectively. It is found that particles lose their correction faster than the case without gravity. Then, a significant increase in the average settling velocity was observed for a certain range of Stokes number. Our focus is placed on gravitational effect on very small particles. Our simulations show that as the Stokes number reduces to zero, their mean settling velocity approaches the terminal velocity in still fluid.

• 전자공학회논문지SC
• /
• 제41권6호
• /
• pp.11-16
• /
• 2004

본 논문에서는 PID제어기의 적분항이 정상상태오차를 없애는 장점은 그대로 유지하되 과도응답에서 오차가 누적되어 응답을 나쁘게 하는 구조적인 단점은 개선하는 PID 제어 방식을 제안하였다. 제안한 방식은 변형된 적분 파라미터를 가진 PID제어 방식으로 오차가 커지는 구간에서는 오차를 누적하고 오차가 작아지는 구간에서는 누적을 하지 않음으로써 기존의 일반적인 PID 제어기에 대해 오버슈트(overshoot)를 감소시키고, 정착시간(settling time)을 빠르게 하여 성능을 개선한다.