• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.89-94
• /
• 2004

This Study is results of experimental works to investigate the characteristics of vibro-compaction of crushed stones having coarse grain sizes. For testing material, crushed stone, sieved within very narrow ranges of grain size distribution, was used. Cyclic loading apparatus was used to apply cyclic loading to the specimen prepared in the mold. Tests were performed by changing the ratio of the maximum to the minimum stress, frequency and the magnitude of the maximum and the minimum stresses. Settlement of specimen due to cyclic loading was measured to analyze the compaction efficiency and sieve analysis test after cyclic loading test was also carried out to find the crushing rate of the specimen. As results of cyclic loading test, normalized settlement in terms of specimen height tends to be converged around loading cycle number of 1500. The magnitude of normalized settlement is in the range of 3.11 ~ 8.57%. The crushing rate is in the range of 4.46 ~ 8.78%. Normalize settlement and the crushing rate tend to increase with decreasing the ratio of the maximum to the minimum stresses and they tend to increase with increasing the frequency and the magnitude of the maximum and the minimum stresses for the given ratio. In conclusions, compaction rate of crushed stone is controlled by the dynamic stress (difference between the maximum and the minimum stresses) and the crushing rate is dominated by applied energy to the specimen.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.461-468
• /
• 2004

The amount of $CO_2$ and $CH_4$ that were produced during biodegradation with were measured as function of time. Also, the settlements of landfill lysimeters were measured at the same time, and the relation with LFF(landfill gas) production was investigated. The effects of leachate recycle on the acceleration of settlement were studied by comparing two lysimeters. The gas production rate constant, $^{\kappa}_{LFG}$ is obtained to predict future gas production and settlement. These will be key role factors to predict gas production patterns and residual long-term settlement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.311-312
• /
• 2023

In this study, porous concrete with improved functionality was developed by using superabsorbent polymer (SAP) to provide rooting space for plants. The depth of settlement and mass change according to the substitution and addition rate of SAP were determined by investigating the functional performance of SAP and the volume change upon saturation. Test results indicated the depth of penetration settlement increased as the substitution rate of SAP increased, but the mass change could not be confirmed as the addition rate of SAP increased. The instability of the specimens due to the excessive volume change of SAP, as well as the osmotic pressure phenomenon according to the pH concentration, were identified as the cause. Therefore, future studies are needed to investigate the appropriate substitution and addition rate of SAP, as well as to reduce the osmotic pressure phenomenon according to the pH concentration, which would contribute to the improvement of the functional performance of vegetation concrete.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.21-28
• /
• 2012

The combined effects of water temperature and salinity on the settlement rate and density (spats/$cm^2$) of Crassostrea gigas pediveliger larvae were studied under the hatchery conditions. Four water temperatures (20.0, 23.0, 26.0 and $29.0^{\circ}C$) were tested at three salinities (20.0, 30.0 and 40.0). The optimum water temperature by salinity conditions were $29.0^{\circ}C$ and 20.0, 30.0 which significantly (P < 0.05) the highest mean (${\pm}S.D$) larval settlement rate of $43.1{\pm}0.1%$, $42.1{\pm}0.1%$, respectively. But the combination of water temperatures and salinities for settlement density was not effected, but each factor as water temperature ($29.0^{\circ}C$), salinity (40.0) was shown significantly high and low settlement density, respectively (P < 0.05). The statistics result of settlement density frequency was appeared: mode ($1.2-2.3spats/cm^2$), Mean ($1.9-2.4spats/cm^2$), Range ($3.0-5.8spats/cm^2$) and the lowest variance was obtained 0.4 at water temperature $20.0^{\circ}C$ by salinity 30.0, but $29.0^{\circ}C$ by 20.0 was the highest (1.1). The best condition at this results for the larvae setting under the artificial seed collection of C. gigas was $29.0^{\circ}C$ and 20.0-30.0.

• Journal of Arbitration Studies
• /
• v.27 no.4
• /
• pp.157-177
• /
• 2017

World Trade Organization(WTO) has 164 members since it has established on 1995. It plays a significant role in solving the world trade disputes. The process of the dispute settlement mechanism includes five steps: Negotiation, Establishment of experts group, Deliberation of appellate body, Execution and Supervision of Verdict and the Sanctions for Default. It suggested that the higher rate of developed countries using mechanism to solving the disputes than developing countries solving disputes by mechanism through the analysis of dispute of WTO members. Meanwhile, the more powerful economic entity is, the more trade dispute will be. There are several problems of mechanism by analysis the recently famous cases of trade disputes: Overburden of experts panel, Low utilization rate of the mechanism of developing countries, Lack of economic competition policy and labor standard terms and Unfulfillment of retaliatory measures of developing countries towards developed countries. This paper propose proper solutions and advises to improve mechanism of WTO dispute settlement.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1782-1788
• /
• 2007

This study analyzed ground settlement and ground stress depending on tunnel excavation and the ground reinforcing grouting methods for double line road tunnel through deep weathered zone. Diameter of double line road tunnel was approximately 12m and umbrella arch method and side wall reinforcing grouting were applied. The ring-cut split excavation method and CD-cut excavation method for excavation method were applied. Analysis of failure rate and vertical stress ratio show that the tunnel for which the height of the cover(H) was higher than four times the diameter, it can be considered a deep tunnel. Comparisons of various excavation and ground reinforcement methods were showed that CD-cut method results in lower surface and crown settlement, and lower failure rate than where using Ring-cut split method. In addition the side wall reinforcing grouting resulted in reduction of tunnel displacement and settlement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.528-541
• /
• 2007

To get the possible for management and maintenance, it was analyzed the deformation characteristics, such as crest of embankment and concrete face slab, and leakage of concrete faced rockfill dams (CFRD). There are trends that embankment deformation depends on intact strength used rockfills rather than dam height, deformation normal to concrete face slab during the first reservoir filling is occurred more than 80% of the total deformation in general, and the magnitude and trend of concrete face slab deformation is similar to post-construction crest settlement. The results showed that the range of post-construction crest settlement suggested by Sherard and Cooke (1987), and Clements (1984) had a good agreement in the cases using rockfill with very high intact strength, but it had a trend which underestimated crest settlement in the cases using rockfill with medium to high intact strength. The maximum leakage rate in general was observed during the first reservoir filling and long-term leakage rate was rapidly increased when the dam height exceeds approximately 120m.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.1
• /
• pp.106-116
• /
• 1989

This study aims at scrutinizing the long4errn consolidation characteristics of peats sampled at three different regions of Chonbuk province. The standard consolidation test and the single load consolidation test were performed about these samples and especially in case of the latter the loading period was 350 days. The main condusions analyzed are as follows. 1. Void ratio showed much greater values than that of the general clay and was decresed greatly according to the increase of the load. 2. In case of the relationship between the sefflement and the long-term settlement time the rate of settlement increment became great according to the increase of the load step and the long4erm settlement became linely proportional to the logarithm of time alter 10 minutes. 3. The linear correlation was showed between the long4erm settlement time and the void ratio and therefore equations by regression analysis were derived in order to estimate the long-term settlement The slope of straight lines increased according th the increase of the load step and secondary consolidation coefficients ranged from 0.04-0.27. 4. The secondary consolidation coeffcient became linealy proportional to the compression index and the ratio of Ca to CC was 0.072. 5. The period required in ending the primary consolidation was about 10 minutes and alter that the secondary consolidation coefficient appeared to have constant value. Therefore the secondary consolidation coefficient was judged to be used as a significant factor in estimating the long4erm settlement. 6. In case of the single load consolidation test the secondary consolidation coefficient showed the tendancy increasing according to the increase of the consolidation pressure.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.111-118
• /
• 2018

In case of excavation of the tunnel under weak ground conditions, such as fault zone, leg pile reinforcement with the purpose of suppressing tunnel crown settlement and side wall displacement is commonly applied. There are convergence, crown settlement, leg settlement, and the axial force of leg as a main factor for confirming the safety of support considering the installation angle and length of leg pile reinforcement according to the increase in rate of change of tunnel cross-section. In particular, the influence of right corner settlement, among variables for safety confirmation during excavation, has been analyzed as the dominant factor in the most important priority management showing larger displacement tendency than the increase in rate of the cross-section. And, it was analyzed that the occurrence tendency of axial force on leg pile reinforcement showed the influence of behavior according to the friction support concept mechanism of the pile reinforcement rather than the increase in rate of tunnel cross-section, as it showed a small increase compared to the increase rate of the tunnel cross-section which did not show a great correlation from the viewpoint of the change of the axial force by the length of each leg pile reinforcement with regards to the change in rate of increase in tunnel cross-section. If a certain length of the leg pile reinforcement is selected based on the above grounds, even if the cross-section of the tunnel in poor ground condition is somewhat larger, it has been proved to be a more reasonable method considering the workability and economical efficiency by not extending the length of the leg pile reinforcement by force.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.107-114
• /
• 2003

Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, the necessity of an alternative method is suggested. In this study, the static load tests for crushed-stone compaction piles which were constructed on test field were performed. Based on test results, stress concentration ratios between the crushed-stone compaction pile and the soft ground were investigated and estimated. At loading pressure, settlement showed decreasing tendency as replacement rate increases. At replacement rate of 20%, yield pressure was smaller but, at replacement rates of 30% and 40%, settlement and yield pressure were similar. The stress concentration ratio was within the range of 1.7 to 3.0 and it was higher as replacement rate increased.