• 한국콘텐츠학회논문지
• /
• 제7권6호
• /
• pp.52-59
• /
• 2007

이 논문은 삼차원 메쉬의 의미있는 조각의 기하적 속성을 나타내기 위하여 정의한 병합우선순위메트릭에 기반한 사용자 의도 메쉬분할의 그리디 방법을 제시한다. 우선순위메트릭은 가우시안사상의 분포, 경계경로의 오목성, 경계경로의 길이, 면의 개수, 분할해상도의 5 가지 기하적 매개변수로 구성된 가중치 함수이다. 이러한 방식은 구도의 변경 없이 다른 기하적 매개변수를 정의하고 추가함으로써 확장될 수 있다. 실험 결과, 분할된 조각의 모양은 기하적 매개변수의 가중치를 부여함으로써 사용자 의도대로 조절될 수 있음을 보여준다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권12호
• /
• pp.2355-2373
• /
• 2011

Vision-based vehicle detector systems are becoming increasingly important in ITS applications. Real-time operation, robustness, precision, accurate estimation of traffic parameters, and ease of setup are important features to be considered in developing such systems. Further, accurate vehicle detection is difficult in varied complex traffic environments. These environments include changes in weather as well as challenging traffic conditions, such as shadow effects and jams. To meet real-time requirements, the proposed system first applies a color background to extract moving objects, which are then tracked by considering their relative distances and directions. To achieve robustness and precision, the color background is regularly updated by the proposed algorithm to overcome luminance variations. This paper also proposes a scheme of feedback compensation to resolve background convergence errors, which occur when vehicles temporarily park on the roadside while the background image is being converged. Next, vehicle occlusion is resolved using the proposed prior split approach and through reasoning for rule-based tracking. This approach can automatically detect straight lanes. Following this step, trajectories are applied to derive traffic parameters; finally, to facilitate easy setup, we propose a means to automate the setting of the system parameters. Experimental results show that the system can operate well under various complex traffic conditions in real time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권4호
• /
• pp.1171-1187
• /
• 2012

A depth adjustment method for visual fatigue reduction for depth-image-based rendering (DIBR) system is proposed. One important aspect of the method is that no calibration parameters are needed for adjustment. By analyzing 3D image warping, the perceived depth is expressed as a function of three adjustable parameters: virtual view number, scale factor and depth value of zero parallax setting (ZPS) plane. Adjusting these three parameters according to the proposed parameter modification algorithm when performing 3D image warping can effectively change the perceived depth of stereo pairs generated in DIBR system. As the depth adjustment is performed in simple 3D image warping equations, the proposed method is facilitative for hardware implementation. Experimental results show that the proposed depth adjustment method provides an improvement in visual comfort of stereo pairs as well as generating comfortable stereoscopic images with different perceived depths that people desire.

• 한국CDE학회논문집
• /
• 제20권1호
• /
• pp.11-21
• /
• 2015

Currently, the United States, the United Kingdom, Australia etc. are actively utilizing energy simulation for efficiency evaluation of building energy. However, domestic energy efficiency assessment system doesn't use energy simulation system properly at present: parameters based architecture plans and Ashrae Standard are inputted for the evaluation, because the input parameters for the simulation haven't been established yet. This fact causes poor reliability during energy simulation, as the values of the two standards are different from each other. Therefore, the aim of the study is to set domestic standard parameter for BIM-based energy performance evaluation, focusing on possession area per person of occupants at government office in Korea. We found that the difference among the result values occurred approximately 3% in the energy simulation. As a result of the analysis, possession area per person of occupants in Government office is $31.87m^2$. Other input parameters may be set based on this. This will increase the reliability of energy simulation through a domestic standard parameter.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.440-445
• /
• 2008

In this paper, new methodology is proposed to estimate the cooling load using areas of building group and predicted weather data. Only three parameters such as maximum, minimum temperature and building area are necessary to obtain hourly distribution of cooling load for the next day. The maximum and minimum temperature that are used for input parameters can be obtained from forecasted weather data. The areas of building group are used for setting several parameters that are used for estimate cooling loads. Benchmarking building(research building) is selected to validate the performance of the proposed method, and the estimated cooling loads in hourly bases are calculated and compared with the measured data for benchmarking building. The estimated results show fairly good agreement with the measured data for benchmarking building.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권1호
• /
• pp.14-28
• /
• 2000

The frequency response characteristics of a condenser were numerically studied for the control of refrigeration and air conditioning systems. The important parameters, such as the refrigerant flow rate, refrigerant temperature, air velocity, and air temperature at the condenser inlet, were analyzed. Superheated vapor, two phase, and subcooled liquid domain in condenser can be described by using the energy balance equation and the mass balance equation in refrigerant and tube wall, the basic equation for describing the dynamic characteristics of condenser can be derived. The transfer function for describing dynamic response of the condenser to disturbances can be obtained from using linearizations and Laplace transformations of the equation. From this transfer function, analytical investigation which affects the frequency responses of condenser has been made. Block diagrams were made based on the analytic transfer function; dynamic responses were evaluated in Bode diagrams on the frequency response. Through this study, it became possible that the information about the dynamic characteristics of air-cooled condenser is offered. The results may be used for determining the optimum design parameters in actual components and entire systems. Also, the mathematical models, frequency response may be used to help understanding, evaluate optimum design parameters, design control systems and determine on setting the best controller for the refrigeration and air-conditioning systems.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.658-663
• /
• 2018

본 논문에서는 콘텐츠 큐레이션 플랫폼의 성능평가 알고리즘을 제안하였다. 성능평가는 초기조건과 종료조건을 설정하고, 4개의 파라미터를 측정하여 수행하였다. 성능평가에 사용되는 파라미터는 서비스 응답속도, 응답결과 정확도, 분석결과 정밀도, 분석결과 재현율이다. 제안한 성능평가 알고리즘의 유효성을 확인하기 위해 118,738건의 데이터베이스를 직접 구축한 후, 인터넷에서 콘텐츠를 오픈하여 이를 클릭한 사용자 행위를 기반으로 실험을 수행하였다. 실험에 사용된 페이지 뷰는 6,975,365건이었다, 실험결과, 4개의 파라미터를 이용하면 콘텐츠 큐레이션 플랫폼의 종합평가와 단위 평가가 객관적으로 수행될 수 있음을 확인하였다.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.739-747
• /
• 2021

This study examined the measurement conditions of the texture profile analysis (TPA) experiments that are typically used to measure the physical properties of sausage. As the measurement conditions (compression ratio and cross-head speed) were changed, the significant differences between the values of textural parameters (hardness, adhesiveness, springiness, cohesiveness, chewiness) of samples changed. Furthermore, among the measurement conditions, there was more variation in the significant difference between the value of samples due to a change in the compression ratio than due to a change in the cross-head speed. The highest variation in significant difference was observed between the values of cohesiveness of samples due to changes in measurement conditions, whereas the lowest variation in significant difference was observed between the values of springiness of samples due to change in measurement conditions. Therefore, it is desirable to provide a clear basis for setting specific measurement conditions for TPA test, since significant differences in the values of textural parameters of samples were caused by differences in cross-head speed or compression ratio, not by a difference in samples, when analyzing the cohesiveness of sausage, especially.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.799-806
• /
• 2021

정합은 고유 좌표를 가지고 있는 점군을 전역 좌표로 변환하는 과정이다. 지역 정합은 계산 시간이 오래 걸리고 대략적인 위치를 맞춘 후 정밀 정합을 수행하고, 전역 정합은 정합에 이용할 대응점을 계산하고 한 번에 정합하기 때문에 일반적으로 지역 정합법에 비해 속도가 빠르고, 초기 위치에도 상관이 없다. 전역 정합 방법 중 고속 전역 정합법은 성능이 우수하여 많이 사용하는 방법 중 하나이다. 하지만 정합 정밀도와 속도를 높이기 위해서는 많은 매개변수가 필요하다. 본 논문에서는 이와 같은 매개변수들을 분석하고 실험하여 실제 정합 시 유효하게 작용하는 매개변수를 제안한다. 제안한 결과는 고속 전역 정합법을 활용해야 하는 경우 방향 설정에 도움이 될 것이다.

• Advances in materials Research
• /
• 제13권1호
• /
• pp.1-18
• /
• 2024

The present experimental investigation focuses on finding optimal parametric data-set of laser micro-drilling operation with minimum taper and Heat-affected zone during laser micro-drilling of Carbon Nanotube/Epoxy-based composite materials. Experiments have been conducted as per Box-Behnken design (BBD) techniques considering cutting speed, lamp current, pulse frequency and air pressure as input process parameters. Then, the relationship between control parameters and output responses is developed using second-order nonlinear regression models. The analysis of variance test has also been performed to check the adequacy of the developed mathematical model. Using the Response Surface Methodology (RSM) and an Accelerated particle swarm optimization (APSO) technique, optimum process parameters are evaluated and compared. Moreover, confirmation tests are conducted with the optimal parameter settings obtained from RSM and APSO and improvement in performance parameter is noticed in each case. The optimal process parameter setting obtained from predictive RSM based APSO techniques are speed=150 (m/s), current=22 (amp), pulse frequency (3 kHz), Air pressure (1 kg/cm²) for Taper and speed=150 (m/s), current=22 (amp), pulse frequency (3 kHz), air pressure (3 kg/cm²) for HAZ. From the confirmatory experimental result, it is observed that the APSO metaheuristic algorithm performs efficiently for optimizing the responses during laser micro-drilling process of nanocomposites both in individual and multi-objective optimization.