• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.169-174
• /
• 2004

To design ship channel is one of important factors for planning and developing a port. In most case, the core factors for designing ship channel are the layout and width of dvnnel provided the net underkeel clearance is assessed as safety. In this study, Variable Bumper Area(VBA) model is applied to design and assess ship channel. This model reflects ship's principle dimension, ship domain theory, ship speed, conning officer's ship handling skill and experience and all external forces which cause leeway, set and drift and the change of ship maneuvering characteristics. Full Mission Ship Handling Simulator is used to analyze ship dynamic data according to conning officer's ship control, external forces, etc. This model uses Domain-index for assessing the efficiency and safety of the channel. The proposed model is applied to Ulsan new port plan which has a channel width of 1.5 times the length if the largest vessel, a radius if 5 times the length of the largest vessel in a curve of 57 degree centerline angle and SBM facility adjacent to the lateral edge if channel. The result of this study shows tint the width and radius of channel curve are suitable for the target ship but the difficulty of ship handling is caused by the large course change and SBM located in the vicinity if channel.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.185-189
• /
• 2012

We report plasma-assisted molecular beam epitaxy of $In_XGa_{1-X}N$ films on c-plane sapphire substrates. Prior to the growth of $In_XGa_{1-X}N$ films, GaN film was grown on the nitride c-plane sapphire substrate by two-dimensional (2D) growth mode. For the growth of GaN, Ga flux of $3.7{\times}10^{-8}$ torr as a beam equivalent pressure (BEP) and a plasma power of 150 W with a nitrogen flow rate of 0.76 sccm were fixed. The growth of 2D GaN growth was confirmed by $in-situ$ reflection high-energy electron diffraction (RHEED) by observing a streaky RHEED pattern with a strong specular spot. InN films showed lower growth rates even with the same growth conditions (same growth temperature, same plasma condition, and same BEP value of III element) than those of GaN films. It was observed that the growth rate of GaN is 1.7 times higher than that of InN, which is probably caused by the higher vapor pressure of In. For the growth of $In_xGa_{1-x}N$ films with different In compositions, total III-element flux (Ga plus In BEPs) was set to $3.7{\times}10^{-8}$ torr, which was the BEP value for the 2D growth of GaN. The In compositions of the $In_xGa_{1-x}N$ films were determined to be 28, 41, 45, and 53% based on the peak position of (0002) reflection in x-ray ${\theta}-2{\theta}$ measurements. The growth of $In_xGa_{1-x}N$ films did not show a streaky RHEED pattern but showed spotty patterns with weak streaky lines. This means that the net sticking coefficients of In and Ga, considered based on the growth rates of GaN and InN, are not the only factor governing the growth mode; another factor such as migration velocity should be considered. The sample with an In composition of 41% showed the lowest full width at half maximum value of 0.20 degree from the x-ray (0002) omega rocking curve measurements and the lowest root mean square roughness value of 0.71 nm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.107-116
• /
• 2009

Quantum-dot Cellular Automata (QCA) is one of the most promising next generation nanoelectronic devices which will inherit the throne of CMOS which is the domineering implementation technology for large scale low power digital systems. In late 1990s, the basic operations of the QCA cell were already demonstrated on a hardware implementation. Also, design tools and simulators were developed. Nevertheless, its design technology is not quite ready for ultra large scale designs. This paper proposes a new approach which enables the QCA designs to inherit the verification methodologies and tools of CMOS designs, as well. First, a set of disciplinary rules strictly restrict the cell arrangement not to deviate from the predefined structures but to guarantee the deterministic digital behaviors is proposed. After the gate and interconnect structures of. the QCA design are identified, the signal integrity requirements including the input path balancing of majority gates, and the prevention of the noise amplification are checked. And then the digital logic is extracted and stored in the OpenAccess common engineering database which provides a connection to a large pool of CMOS design verification tools. Towards validating the proposed approach, we designed a 2-bit adder, a bit-serial adder, and an ALU bit-slice. For each design, the digital logic is extracted, translated into the Verilog net list, and then simulated using a commercial software.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.1
• /
• pp.127-134
• /
• 2018

This study evaluated the effects of high air temperature and waterlogging duration on growth and yield of Kimchi cabbage. Air temperature treatments were applied with ventilation; optimal (set $20^{\circ}C$) and delayed ($30^{\circ}C$) in the greenhouses. The waterlogging treatment levels were implicated 0, 12, 24, 48, and 72 hours, respectively. The growth of Kimchi cabbage was significantly affected by waterlogging duration. The head weight decreased by combining severe waterlogging and high air temperature. Net photosynthetic rate under the combination of non-waterlogging and optimal air temperature was $22.6{\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$, which was the greatest, while that of 72 hours-waterlogging was rapidly decreased. The percentage of formality with 0, 12, and 24 hours-waterlogging was over 88%, however, those of 72 hours-waterlogging with optimal and delayed ventilation were 64 and 68%, respectively, which were dramatically reduced. The yields were more affected by waterlogging duration than air temperature treatment because of deducting as increased waterlogging periods. These results indicate that waterlogging treatment reduced the yield and quality of Kimchi cabbage, thus it will be feasible to enhance the harvest time when severe waterlogging in the field.

• Environmental and Resource Economics Review
• /
• v.24 no.2
• /
• pp.311-342
• /
• 2015

We evaluate two main rationales of massive policy intervention of Lee Administration in the Korean transportation fuel market: high market share of domestic refineries, perceived by the Administration as the result of high market concentration, and asymmetry in price adjustment, perceived as the result of collusion. Domestic refineries, huge in capacity and located at seaports, maintain international competitiveness in price. Considering market openness offering preferential treatment to importers, they set domestic prices competitively on the basis of MOPS prices. Yet, the price competitiveness of domestic refineries is so high that they are able to sustain high market share. We confirm that the Korean before-tax consumer prices of gasoline and diesel are lower than Japan's and the weighted averages of 27 EU countries by as much as 159KRW and 21KRW per liter in the case of gasoline and 170KRW and 63KRW in the case of diesel. Price asymmetry is caused by diverse economic and managerial reasons and, as FTC (2005) states, price asymmetry does not immediately imply exercise of market power or collusion. We analyzed price asymmetry in Korea, Japan and 14 EU countries, and found asymmetry in Korea and 11 EU countries in the case of gasoline and in Korea and 8 EU countries in the case of diesel.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.357-366
• /
• 2015

By using the Optical Wide-field Patrol (OWL) network developed by the Korea Astronomy and Space Science Institute (KASI) we generated the right ascension and declination angle data from optical observation of Low Earth Orbit (LEO) satellites. We performed an analysis to verify the optimum number of observations needed per arc for successful estimation of orbit. The currently functioning OWL observatories are located in Daejeon (South Korea), Songino (Mongolia), and Oukaïmeden (Morocco). The Daejeon Observatory is functioning as a test bed. In this study, the observed targets were Gravity Probe B, COSMOS 1455, COSMOS 1726, COSMOS 2428, SEASAT 1, ATV-5, and CryoSat-2 (all in LEO). These satellites were observed from the test bed and the Songino Observatory of the OWL network during 21 nights in 2014 and 2015. After we estimated the orbit from systematically selected sets of observation points (20, 50, 100, and 150) for each pass, we compared the difference between the orbit estimates for each case, and the Two Line Element set (TLE) from the Joint Space Operation Center (JSpOC). Then, we determined the average of the difference and selected the optimal observation points by comparing the average values.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.235-241
• /
• 2014

There are many traffic problems in a city such as parking, traffic jam caused by traffic induction facility. Therefore it is essential to demand for traffic demand management to building's owner whose building location causes traffic induction. According to the 90s traffic policy, government collects fee for traffic induction facility through traffic policy management and they encourage the building owner to join reduction of traffic jam program by reduction of traffic induction fee. However there are not many buildings owner joined this program because the program is not ghat beneficial. For example, if government set out parking guidance system (part of parking demanding system) in a city, it will reduce to 20% of traffic induced contributions but t can be used only once a year, so it is not efficient to used even it is valuable for about 10 years. In particular, according to the economic efficiency analysis, evaluate economically as net present value (NPV) to 2,160.44 million won, ratio of benefit/cost (B / C) to 2.44 during 10 years. Therefore this research will find out what is necessary for parking guidance system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.264-268
• /
• 2006

This study investigated the effect of self-incompatibility control substance 'Apple plus' in improving self-fertilization and quality on apple. Results showed that the rate of fruit setting of disc florets of Fuji apple in the open field increased from 17.2% in 2004 to 44.4% in 2005 for the treated plots and from 0.5% in 2004 to 3.0% in 2005 for the control. In the case of using net covering, the rate of fruit setting increased from 3.3% in 2004 to 5.2% in 2005 for the treated plots and from 0.4% in 2004 to 0.1% in 2005 for the control. For the quality of apple fruits, results showed that there was no significant difference on the fruit L/D and firmness for both control and treated plots. However, the number of seeds was affected by the different substances which produced the following average number of seeds: control, 0.9; IS-1, 1.2; IS-2, 1.2; IS-3, 1.5 and IS-4, 0.7. The SSR genetic analysis showed that the rate of self-fertilization was highest for IS-1 (100%), followed by IS-2 (73%), IS-3 (68%), IS-4 (62%) and control (0%).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.45-52
• /
• 2006

This study was carried out to explore the accuracy of Near Infrared Reflectance Spectroscopy (NIRS) fer the prediction of digestibility and energy value of corn silages. The spectral data were regressed against a range of digestibility and energy parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with first and second order derivatization, with scatter correction procedure(SNV-Detrend) to reduce the effect of extraneous noise. Calibration models for NIRS measurements gave multivariate correlation coefficients of determination$(R^2)$ and standard errors of cross validation of 0.92(SECV 1.73), 0.91(SECV 1.13) and 0.93(SECV 1.74) for in vitro dry matter digestibility(IVDMD), in vitro true digestibility(IVTD), and cellulase dry matter digestibility(CDMD), respectively. The standard error of prediction(SEP) and the multiple correlation coefficient of validation$(R^2v)$ on the validation set(n=39) was used in comparing the prediction accuracy. The SEP value was 0.30(TDN), 0.01(NEL), and 0.01(ME). The relative ability of NIRS to predict digestibility and energy value was very good for CDMD, total digestible nutrients(TDN), net energy fer lactation(NEL) and metabolizable energy(ME). This paper shows the potential of NIRS to predict the digestibility and energy value of con silage as a routine method in feeding programmes and for giving advice to farmers.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.1-16
• /
• 2002

The purposes of this study were to investigate the effects of strength training on the change of ground reaction force for the children with trisomy 21 Down syndrome. The subjects of this study were consisted of eight elementary school students with Down syndrome who participated in the strength training. The strength training was administered by six items such as squat, leg curl, leg extension, toe raise, sit-ups, and hyperextension. For strengthening muscle, each group also was treated by walking for 8 weeks, three times a week, 10-15RM, 3sets, which was based on the principle of progressive overload. For inquiring the effect of strength training, the ground reaction force variables were measured in two phases : before-training and 8 week-after training. The gait of each subject was acquisition using 2 AMTI force platforms set at 100 frequency. The results of this study were as follows: The pattern of vertical, antero-posterior and medio-lateral forces, trajectory of net COP and the timing ratio of reaching the each events were shown variously. So, it is not easy to explain these variables clearly. As the result of strength training, these variables were changed. However, the results of within subjects differ greatly, there was no difference statistically.