• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.201-204
• /
• 2002

Kansei design knowledge acquisition stage is a crucial stage in kansei designing process and kansei engineering (KE) methodology. In kansei engineering methodology, it is essential to extract design knowledge or rules on relationships between customer's kansei and product design element. We attempt to construct a more powerful melted for extracting the design rules from kansei expremental data. We constucted a kansei experiment concerning color kansei evaluation, and analyzed the sane data by both conventional quantification theory type I and rough set theory. Finally, we compared the effectiveness of both methods for extracting rules and examined the extensions of rough set theory in kansei engineering.

• Structural Engineering and Mechanics
• /
• v.41 no.2
• /
• pp.243-262
• /
• 2012

Nonlinear static analysis as an essential part of performance based design is now widely used especially at design offices because of its simplicity and ability to predict seismic demands on inelastic response of buildings. Since the accuracy of nonlinear static procedures (NSP) to predict seismic demands of buildings affects directly on the entire performance based design procedure, therefore lots of research has been performed on the area of evaluation of these procedures. In this paper, one of the popular NSP, FEMA356, is evaluated and compared with modal pushover analysis. The ability of these procedures to simulate seismic demands in a set of reinforced concrete (RC) buildings is explored with two level of base acceleration through a comparison with benchmark results determined from a set of nonlinear time history analyses. According to the results of this study, the modal pushover analysis procedure estimates seismic demands of buildings like inter story drifts and hinges plastic rotations more accurate than FEMA356 procedure.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.557-565
• /
• 1991

The activated sludge process is a commonly used method for terating sewage and waste waters. The process is chatacterized by a lack of measurement instrumentations and control goals that are not always clear and not well understood. In such process, fuzzy control concept may be able to be adapted, do this paper presents a design method for fuzzy controller based on a selected sub-rule set from the total rule set and a multivariable fuzzy reasoning algorithms. In order to achievesystematic and efficient control of the activated sludge process under a great deal of disiutbances and a variety of perfotmance characteristics, a top-level rule-based fuzzy controller os proposed which provises lower-controllers with the suitable set-points according tothe onput-output states of the process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.88-97
• /
• 1999

In this study, a systematic approach for roll pass design in bar rolling was studied. To minimize the trial and errors in the process design, a roll CAD system and a FE analysis system were combined. Based on the system, a methodology for roll pass design by FEM was studied. At first, designed process was compared with the FE analysis results and process redesign based on the FEM results was performed to obtain the specified final geometry. Then, empirical formula for roll speed set-up was compared with the FE analysis results. Further study on various simulations for bar rolling will help in making up for the inaccuracy in the currently used empirical roll speed rules. In addition, verification of the accuracy of the FE analysis system must be performed using experimental data in the industry.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.272-278
• /
• 2004

Recently, Pepe et al. (2003) employed the receiver operating characteristic (ROC) approach to rank candidate genes from a microarray experiment that can be used for the biomarker development with the ultimate purpose of the population screening of a cancer, In the cancer microarray experiment based on n patients the researcher often wants to compare the tumor tissue with the normal tissue within the same individual using a common reference RNA. This design is referred to as a reference design or an indirect design. Ideally, this experiment produces n pairs of microarray data, where each pair consists of two sets of microarray data resulting from reference versus normal tissue and reference versus tumor tissue hybridizations. However, for certain individuals either normal tissue or tumor tissue is not large enough for the experimenter to extract enough RNA for conducting the microarray experiment, hence there are missing values either in the normal or tumor tissue data. Practically, we have $n_1$ pairs of complete observations, $n_2$ 'normal only' and $n_3$ 'tumor only' data for the microarray experiment with n patients, where n=$n_1$+$n_2$+$n_3$. We refer to this data set as a mixed data set, as it contains a mix of fully observed and partially observed pair data. This mixed data set was actually observed in the microarray experiment based on human tissues, where human tissues were obtained during the surgical operations of cancer patients. Pepe et al. (2003) provide the rationale of using ROC approach based on two independent samples for ranking candidate gene instead of using t or Mann -Whitney statistics. We first modify ROC approach of ranking genes to a paired data set and further extend it to a mixed data set by taking a weighted average of two ROC values obtained by the paired data set and two independent data sets.

• Korean Institute of Interior Design Journal
• /
• no.22
• /
• pp.16-22
• /
• 2000

The purpose of this study is to analyze characteristics of set-booth in beauty salon as well as to suggest the basic design data for franchise beauty salon. The method of this research was based on field observation of the franchise beauty salon in Seoul. The results of this research are as follows. 1) In set-booth type analysis, set-mirror wall type and set-mirror partition type are mainly used, but set-mirror table type is not showed in this research. 2) In terms of scale, wall type and partition type are classified as large scale, wall type and partition type are used as meduim scale. In shop front analysis, the result is shown in two things. If it is type, they used partition type and if it is close type, they used wall type. 3) Set-mirror is consisted of mirror and drawer and it is classified by 4 types with combination method. In a result, most of them used separated mirror type because they want to emphasize the separation between set booth and its layout. 4) Lighting method has 4 types; corniced type, bracket type, pendant type and downlight type. Among them, downlight is showed as the most-used.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.1-9
• /
• 2009

This paper proposes an effective method on the DFILS(Design for Integrated Logistics Support) in ammunition development applying QFD(Quality Function Deployment) method. The goal of this research is to define the Design for ILS approach at the start of the ammunition development and to yield a set of reusable requirements. Based on 000mm High-Explosive(Warship ammunition) development work, a QFD software tool, CUPID, was used to analyze and define the field force's requirements. Additionally, a set of reusable requirements are identified and defined for use during the Design for ILS development phase in the next-generation ammunition development process. These set of requirements that consider both the priority and importance of the VOC(Voice of Customer) will contribute to the early phase of the ammunition development to implement the Design for ILS specialty engineering effort.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.4
• /
• pp.72-78
• /
• 1995

The diffusion of fuzzy logic techniques into real applications requires specific software supports which save development time and reduce the programming effort. But we has been lack of a tool devoted to support the design of fuzzy controllers. In this paper, on the basis of the general fuzzy set and .alpha.-cut set decomposition of fuzzy sets, a set of fuzzy reasoning tool(FRT) devoted to support the design of fuzzy dontroller for servo systems is developed. The major features of this tool are: 1) It supports users to analyze fuzzy ingerence status based on input deta and expected results by three-D graphic display. 2) It supports users to prepare input data and expected result. 3) It supports users to tuned scaling factor of membership functions, rules and fuzzy inference. The paper shows how the suggested design tools are suitable to give a consistent answer to the tuning of fuzzy control system. This FRT is expected to exert good performance and devoted to support which the design of fuzzy controller is illustrated in the servo systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.921-924
• /
• 2005

Diesel generator sets with resilient mounts often experience resonances by major excitations which come from diesel engine and their foundation with rigid body modes. Because their natural frequency is determined by moment of inertia and stiffness of resilient mount vibration problems are resolved by changing location and stiffness of resilient mounts. But the calculated natural frequencies are inaccurate due to uncertainty of the inertia and mount stiffness. So this result can be useless on the design stage. In this paper, the stiffness of mount is evaluated on result from mount stiffness test in laboratory and generator set vibration test and a simple calculation method for moment of inertia is proposed. Based on these data, the procedure to select optimized mount stiffness and location on the design stage is set up.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.157-162
• /
• 2012

A structural modification of baseframe is an effective method to avoid resonance in marine diesel generator (D/G) set which consists of diesel engine, generator and baseframe. However the reinforcement with thick plates or additional parts to increase the natural frequency can be less effective because of increased weight. Especially fine control of target mode based on the experience is difficult because the weight and interference of system have to be considered. In this paper, the design optimization of baseframe was performed to reduce the resonant vibration using a gradient descent method. The design parameters such as thickness, shape and location of baseframe parts are optimized to increase the torsional natural frequency of D/G set. From the actual test, the new designed baseframe reduced the vibration level in resonance by 55% without any increase of weight and interference. interference.