• 수산해양기술연구
• /
• 제45권4호
• /
• pp.211-222
• /
• 2009

The fisheries resources by a set net in the coastal waters off Neungpo, Goeje Island from 2003 to 2004 were studied to determine species composition and catch variation. The main fishing period by a set net were from April to December in 2003 and from May to December in 2004. A total weight of 48 species caught through the survey period was 540,688.0kg. Most of them were 44 species of fishes and a few were 4 species of cephalopods. Dominant species was Trachurus japonicus accounting to 57.5% in total catch. Sub-dominant species were Trichiurus lepturus(12.9%), Engraulis japonicus(10.6%), Scomber japonicus(6.9%), Clupea pallasii(4.5%), Todarodes pacificus(2.8%) and Parapristipoma trilineaturm(1.3%). The remnant species showed a low catch, indicating the catch had less than 1% in total, respectively. T. japonicus and T. lepturus were caught throughout the survey period, but C. pallasii, Gadus macrocephalus, Oncorhynchus keta in low temperature season and Thunnus obesus in high temperature season. The fishing ground temperature was 11.7-24.0${^{\circ}C}$ in range and the catch by a set net was higher in autumn than in spring and in summer with the variation of fishing ground temperature. The annual catch by a set net was much higher in 2004 than in 2003 due to high temperature(>17${^{\circ}C}$) and the recruitment of T. japonicus from offshore seas. Therefore we concluded that the catch of Neungpo fishing ground by a set net was highly related to the variation of T. japonicus catch with fishing ground temperature.

• 설비공학논문집
• /
• 제27권3호
• /
• pp.137-145
• /
• 2015

In this study, the actual energy consumption of the secondary side of District Heating System (DHS) with different hot water supply temperature control methods are compared. Three methods are Set-point Control, Outdoor Temperature Reset Control and Outdoor Temperature Prediction Control. While Outdoor Temperature Reset Control has been widely used for energy savings of the secondary side of the system, the results show that Outdoor Temperature Prediction Control method saves more energy. In general, Outdoor Temperature Prediction Control method lowers the supply temperature of hot water, and it reduces standby losses and increases overall heat transfer value of heated spaces due to more flow into the space. During actual energy consumption monitoring, Outdoor Temperature Prediction Control method saves about 7.1% in comparison to Outdoor Temperature Reset Control method and about 15.7% in comparison to Set-point Control method. Also, it is found that at when partial load condition, such as daytime, the fluctuation of hot water supply temperature with Set-point Control is more severe than Outdoor Temperature Prediction Control. Therefore, it proves that Outdoor Temperature Prediction Control is more stable even at the partial load conditions.

• 한국지열·수열에너지학회논문집
• /
• 제7권2호
• /
• pp.30-36
• /
• 2011

In this study, energy saving performance of outdoor temperature reset control strategy for central cooling system is researched by experiments. Outdoor temperature reset control is the control method to change indoor air set temperature according to outdoor air temperature change. The range of indoor air set temperature is represented by the comfort temperature range of indoor air temperature offered from ASHRAE and indoor air set temperature is programmed between $22^{\circ}C$ and $27^{\circ}C$ by outdoor air temperature $20^{\circ}C{\sim}32^{\circ}C$ in summer. As a result of applying outdoor temperature reset control to central cooling system, the suggested control method shows better performances of energy savings than the conventional method which indoor temperature maintains constantly.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.273-274
• /
• 2023

In this study, ultrasonic pulse velocity was analyzed to evaluate the high-temperature mechanical properties of concrete mixed with non-sintered hwangto. The W/B of the specimens was set at 0.41, the percentage of non-sintered hwangto admixture was set at two levels of 15,30%. The target temperature of the specimen is set to 6 levels of 20, 100, 200, 300, 500, 700 ℃, and the heating rate is set to 1℃/min. The result showed that the amount of non-sintered hwangto incorporated into the concrete tends to results in lower compressive strength. Ultrasonic pulse velocity showed similar trends, but differed in some areas.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.352-357
• /
• 2007

The objective of this study is to find the optimal set-point of a hybrid Plant, which is combined by renewable energy plant of the GSHP(Ground Source Heat Pump) and the conventional plant(chiller, boiler). The work presented in this study was carried out by using the EnergyPlus(Version 2.0). In order to validate the simulation model, field data were measured from a building. The GSHP was used as a base plant and the conventional plant as the assistant plant. Various temperatures were controlled (zone summer set-point, zone winter set-point, chilled water temperature, hot water temperature) to find the optimal set-point temperature of the system. The influence of the various set-points were analyzed seasonally.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.41-46
• /
• 2009

천연고무의 일정하중 영구압축률에 온도와 가교시스템이 미치는 영향을 고찰하였다. 다양한 가교시스템과 가교밀도의 고무시편을 만들기 위해 여러 가지 함량의 황과 dicumyl peroxide(DCP)를 사용하여 배합하였으며, 가교된 천연고무의 일정변위 조건에서 측정된 영구압축률과 일정하중에서 측정된 영구압축률의 차이를 비교하였다. 일정하중 영구압축률은 일정변위 영구압축률에 비해 가교밀도의 변화에 따라 상대적으로 큰 차이를 보였으며, 이는 영구압축률 측정 시 공급된 변형에너지가 다르기 때문이다. 또한 일정하중 영구압축률 측정에서 황으로 가교시킨 시편의 경우 하중과 온도증가에 따라 영구압축률이 크게 증가하였고, 이에 반해 DCP로 가교시킨 시편의 경우 하중과 온도증가에 큰 영향을 받지 않았다.

• 소성∙가공
• /
• 제18권4호
• /
• pp.290-295
• /
• 2009

The roll gap set-up in the finishing mill is one of the most important technologies in the hot plate rolling process. As the target thickness can be obtained by the correct set-up of the roll gap, improving the roll gap set-up technology is very critical for plate thickness accuracy. The main cause of thickness variation in hot plate mills is the non-uniform temperature distribution along the length of the slab. The objective of this study is to adjust the roll gap set-up for the thickness accuracy of plate in hot rolling process considering top-end temperature drop. Therefore this study has concentrated on determining the correct amounts of thickness variation according to top-end temperature drop and roll gap to compensate thickness variation. The control method of roll gap set-up which can improve the thickness accuracy was proposed. The off-line simulation of compensated roll gap significantly decreases top-end thickness variation.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.27-34
• /
• 2018

This study compared constant water bath performances of conventional water-cooled refrigerator and electric heater with an air-cooled VRF chiller and electric heater equipped with optimal control algorithm. In heating mode, the air cooled VRF chiller and electric heater combination reduced the set temperature arrival time by an average of 42 minutes, and energy was also reduced by 18%. In cooling mode, the two systems took 70 minutes to reach the set temperature and showed no difference. Energy was reduced by 33.5% with the new system. For constant temperature maintaining experiment, after reaching the set temperature of $15^{\circ}C$, $20^{\circ}C$ and $22^{\circ}C$, temperature deviations were all in the range of $-0.2^{\circ}C$ to $+0.1^{\circ}C$. Energy was reduced by an average of 84.9%. Through this study, possibility of precise temperature control by an air cooled VRF chiller system was confirmed.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.265-265
• /
• 2022

Increased temperature caused by global warming has become a significant problem for the growth and production of crops. A high temperature has a direct or an indirect effect on crops, leading to a significant yield loss. The damage of a high temperature stress to rice depends on its developmental stage. In present study, we performed evaluate the heading date in different location, Yeoju and Miryang, during growth of Korean rice core set. The heading date for the 223 rice accession were evaluated in Yeoju City (37°23' 127°57') and Miryang City (35°50', 128°72') located on middle and southern part of Korea, respectively. The average temperature of a day was higher in Miryang during entire growth stage. Here, total 222 KRICE-Core set was analyzed by GWAS for the high temperature effect. GWAS results revealed the Chr07_26954556, a lead SNPs were significantly associated with delaying heading date of KRICE-Core set. Significance threshold was set with 6.0 > -log10(P), and Cross-Validation (CV) error suggested an optimal K value of 5 for the population based on the lowest cross-validation error K = 5.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.33-40
• /
• 1987

PET FDY was heat set at various temperatures and times and the microstructural changes was investigated through crystallinity, birefringence and melting behavior analyses. Crystallinity of heat set PET increased as the treatment temperature and time increased. Birefringence also increased as temperature and time increased. The melting behavior of heat set PET was as follows: In most cases, PET showed double melting peaks. As temperature and time increased, form II crystal became sharp and increased in size, and form I crystal decreased in size. The slower the heating rate, the higher the programmed heating effect during DSC analysis.