• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.77-84
• /
• 2021

To control hot spot in a plug flow reactor (PFR) is important for the yield and purity of products and safety. In this paper, coolant temperature is set as a state variable, and radial distributions of heat and mass are considered to model the PFR more realistic than without considering radial distributions. The model consists of three state variables, reactant concentration, reactant temperature, and the coolant temperature. The flow rate of the isothermal coolant is a manipulated variable. This paper shows that the controller considering the radial distributions of heat and mass is more effective than the controller without them. Assuming that u3,0 is 0.7, the suggested control equation was robust when St is bigger than 1.3, and Ac/A is smaller than 2.0. Under this condition, the hot spot temperature changed within the relative error of one percent when the temperature of input altered within the range of five percent.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.109-120
• /
• 2003

Though the airborne laser scanning (ALS) technique is becoming more popular in many applications, horizontal accuracy of points scanned by the ALS is not yet satisfactory when compared with the accuracy achieved for vertical positions. One of the major reasons is the drift that occurs in the inertial measurement unit (IMU) during the scanning. This paper presents an algorithm that adjusts for the error that is introduced mainly by the drift of the IMU that renders systematic differences between strips on the same area. For this, we set up an observation equation for strip-wise adjustments and completed it with tie point and control point coordinates derived from the scanned strips and information from aerial photos. To effectively capture the tie points, we developed a set of procedures that constructs a digital surface model (DSM) with breaklines and then performed feature-based matching on strips resulting in a set of reliable tie points. Solving the observation equations by the least squares method produced a set of affine transformation equations with 6 parameters that we used to transform the strips for adjusting the horizontal error. Experimental results after evaluation of the accuracy showed a root mean squared error (RMSE) of the adjusted strip points of 0.27 m, which is significant considering the RMSE before adjustment was 0.77 m.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.73-78
• /
• 2004

This paper proposes a framework for determining the minimum load shedding for restoring solvability. The framework includes a continuation power flow (CPF) and an optimal power flow (OPF). The CPF parameterizes a specified outage from a set of multiple contingencies causing unsolvable cases, and it traces the path of solutions with respect to the parameter variation. At the nose point of the path, sensitivity analysis is performed in order to achieve the most effective control location for load shedding. Using the control location information, the OPF for locating the minimum load shedding is executed in order to restore power flow solvability. It is highlighted that the framework systematically determines control locations and the proper amount of load shedding. In a numerical simulation, an illustrative example of the proposed framework is shown by applying it to the New England 39 bus system.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.229-232
• /
• 2005

In this paper, an image-based "approach-align -grasp" visual servo control design is proposed for the problem of object grasping, which is based on the binocular stand-alone system. The basic idea consists of considering a vision system as a specific sensor dedicated a task and included in a control servo loop, and we perform automatic grasping follows the classical approach of splitting the task into preparation and execution stages. During the execution stage, once the image-based control modeling is established, the control task can be performed automatically. The proposed visual servoing control scheme ensures the convergence of the image-features to desired trajectories by using the Jacobian matrix, which is proved by the Lyapunov stability theory. And we also stress the importance of projective invariant object/gripper alignment. The alignment between two solids in 3-D projective space can be represented with view-invariant, more precisely; it can be easily mapped into an image set-point without any knowledge about the camera parameters. The main feature of this method is that the accuracy associated with the task to be performed is not affected by discrepancies between the Euclidean setups at preparation and at task execution stages. Then according to the projective alignment, the set point can be computed. The robot gripper will move to the desired position with the image-based control law. In this paper we adopt a constant Jacobian online. Such method describe herein integrate vision system, robotics and automatic control to achieve its goal, it overcomes disadvantages of discrepancies between the different Euclidean setups and proposes control law in binocular-stand vision case. The experimental simulation shows that such image-based approach is effective in performing the precise alignment between the robot end-effector and the object.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1137-1143
• /
• 2009

This paper presents the FPGA implementation of efficient algorithms for approximating exponential function based on floating point format data. The Taylor-Maclaurin expansion as a conventional approximation method becomes inefficient since high order expansion is required for the large number to satisfy the approximation error. A format converter is designed to convert fixed data format to floating data format, and then the real number is separated into two fields, an integer field and an exponent field to separately perform mathematic operations. A new assembly command is designed and added to previously developed command set to refer the math table. To test the proposed algorithm, assembly program has been developed. The program is downloaded into the Altera DSP KIT W/STRATIX II EP2S180N Board. Performances of the proposed method are compared with those of the Taylor-Maclaurin expansion.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.93-96
• /
• 1999

Solar cell generate DC power from sunlight whose power is different at any instance according to condition of variables : insolation and temperature. In order to improve the system utility factor and efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under different condition. In this paper, Boost chopper is controlled it output voltage with a new discrete control algorithm for MPPT. PWM signal of DC-DC converter are generated with a 89C51 microcontroller. Switching frequency of DC-DC converter is set at 10KHz. Simulation and experimental results show that the PV system studied in this paper is always operated at maximum power point under different maximum power point of solar cells having stabilized output voltage waveform with relatively small ripple component

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.21-22
• /
• 2014

본 논문은 5-레벨 NPC/H-브릿지 (Neutral Point Clamped/H-bridge) 인버터의 최적 제어 세트 (finite-control-set) 모델 예측 제어 (MPC: Model Predictive Control) 방법을 제안한다. NPC/H-브릿지 인버터의 출력 전류 제어 및 DC-link 커패시터 전압 균형을 유지하기 위해 출력 전류와 DC-link 커패시터 전압을 예측하고, 하나의 비용 함수 (cost function)을 통해 최적의 스위칭 상태를 출력한다. PSIM 시뮬레이션을 통해 제안된 제어 알고리즘의 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.459-462
• /
• 1986

The liquid level in a spherical tank was controlled with a micro-computer and the dynamic behavior of this non-linear system due to the variation of set point was studied. The adaptive control theory was used and the real values of controlled variables were compared with the theoretical values from a mathematical model.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.12
• /
• pp.879-883
• /
• 1988

In this paper, self tuning control of interconnected systems are dealt in view point of large scale system control. The plant model is given in MIMO ARMA procss. This process is simlified as independent SISO ARMA processes having offset terma, which are considered as effects of interconnections. In each decentralized system, self tuning controller with instrumental variable method is adopted. As a result, this algorithm enables the paramter estimation to be unbiased and non-drift. This controller contains a new implicit offset rejection technique. Simulation results consider well with the analysis in case of linear interconnection.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.118-121
• /
• 2002

본 논문에서는 힘을 측정하여 도립진자를 제어하는 방법을 제안하였다 기존의 각도를 측정하여 도립진자를 0도로 보내는 Set Point Control보다 힘을 제어하여 도립진자를 수직한 영역(Boundary Control)으로 보내는 제어를 하면 제어입력이 감소하고, 외란과 자중이 평형이 되는 위치에서 제어입력은 0이 됨을 보였다.