• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2007

Since the Intelligent Building was first introduced in early 1980s, It has been studied and designed by related technical experts as it was called by the name of intelligent Building, High-tech Intelligence Building, High-capacity Building, Intellectual Building, etc. Despite the need for new concept as the relation between global environment and architecture has become an issue on a full scale since 1990s and with the development of high technology, former concept is maintained without modification or complement. Especially, attempt to combine industrial technology with architecture is essential to Intelligent Building, therefore frequent opportunity of self-innovation according to the development of technology is necessary. Due to the rarity of the high-technology and its high cost, it was adopted to large-scale construction, however, nowadays, almost all kinds of buildings are getting designed with intelligent-technology. Therefore we can expect that this trend will be accelerated by evolution of technology and will position as a major stream of future architecture along with environment-friendly architecture. Through this process, we should fully be aware of the importance of the several intelligent skin technology to protect global environment and to set future direction in architecture.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.474-481
• /
• 2013

Objectives: This study was conducted to investigate the application of microbial fuel cells (MFCs) to the wastewater treatment systems employed in the Living Building Challenge. Methods: I reviewed a range of information on decentralized wastewater treatment technologies such as composting toilets, constructed wetlands, recirculating biofilters, membrane bioreactors, and MFCs. Results: The Living Building Challenge is a set of standards to make buildings more eco-friendly using renewable resources and self-treating water systems. Although there are various decentralized wastewater treatment technologies available, MFCs have been considered an attractive future option for a decentralized system as used in the Living Building Challenge. MFCs can directly convert substrate energy to electricity with high conversion efficiency at ambient and even at low temperatures. MFCs do not require energy input for aeration if using open-air cathodes. Moreover, MFCs have the potential for widespread application in locations lacking water and electrical infrastructure Conclusions: This paper demonstrated the feasibility of MFCs as a novel decentralized wastewater treatment system employed in the Living Building Challenge.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.37-43
• /
• 2015

Purpose : The study applied control strategy to reduce through optimal control and operation of pump by applying control on variable speed to the circulation pump of HVAC system in the office building. The study has the purpose to review validity of control on variable speed as ESMs(Energy Saving Measures) and establish the control technology on variable speed pump. The study performed reduction analysis of building energy and economic evaluation of pump through energy effectiveness control strategy of HVAC system. Method: The study sought possible reduction through energy control strategy which can provide proper flow fitting to building load by applying control on variable speed pump. The study applied control strategy to reduce through pressure differential set-point control and operation of pump by applying control on variable speed to the circulation pump of HVAC system in the office building. Result : The results showed that about 16-35% of pump energy could be saved by using these optimal control strategies. In the result of analysis on 10 years life cycle cost of analysis on payback period of initial investment pump, variable speed pump control showed 5.1 years.

• Plant Journal
• /
• v.7 no.4
• /
• pp.67-76
• /
• 2011

Two main features of the recent building project are the enlargement of the size and the technological complexity. Due to these features, the number or the size of organizations participating in building project is also increasing and the relationships between the organizations are becoming more interdependent than ever. Owing to these features, some delays or errors in the decision-making process in the phase of planning of a building project may influence many subjects related to the project. The most important factor for a successful project is to arbitrate confrontations and build cooperative relationships between parties who have different interests with one another in the project. Efforts were made to find out general features of building project and the features in the phase of planning in order to set a direction of this research. To solve problems in the phase of planning, the concept of 'cooperative design', which means that different features and interests of various organizations should be reflected from the phase of planning, was introduced. By introducing cooperative design in building projects, more rapid and objective decision-makings are possible.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.352-357
• /
• 2007

The objective of this study is to find the optimal set-point of a hybrid Plant, which is combined by renewable energy plant of the GSHP(Ground Source Heat Pump) and the conventional plant(chiller, boiler). The work presented in this study was carried out by using the EnergyPlus(Version 2.0). In order to validate the simulation model, field data were measured from a building. The GSHP was used as a base plant and the conventional plant as the assistant plant. Various temperatures were controlled (zone summer set-point, zone winter set-point, chilled water temperature, hot water temperature) to find the optimal set-point temperature of the system. The influence of the various set-points were analyzed seasonally.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.203-206
• /
• 2007

In urban flood model, the features like roads, buildings, and river's banks have great effect on flow dynamics and flood propagation and it must be accounted for model set-up. Two-dimensional hydraulic models in high-density building areas are at the forefront of current research into flood inundation mechanisms, but they are however constrained by inadequate parameters of topography and friction due to insufficient and inaccurate data. This paper describes the development of urban flooding with the extraction of building areas and estimates the its influence on flood inundation extent, and present initial results of flood simulation varying grid size.

• Journal of Korean Society for Quality Management
• /
• v.31 no.2
• /
• pp.51-68
• /
• 2003

This research addresses familiarity and degree of using Internet site and trust building to affect service quality in e-commerce. We assume that the familiarity and frequency of using Internet site affect perceived service quality of customer. Also it assumes that customer's trust building intermediates their relationships. Several hypotheses are set to test these assumptions empirically. Consequently, the results show that familiarity of using Internet site affects customer's perceived service quality significantly except for tangible. Also it is found that degree of customer's trust building intermediates the relationship between familiarity of using Internet site and customer's perceived service quality significantly. For gaining good trust of customer in Internet site, we suggest that familiarity should fit into customer's needs.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.187-192
• /
• 2009

Nowadays, global warming and high oil prices were a threat to the survival of the whole human race. One of a solution to respond to these problems is to reduce energy consumption of building. By adopting energy-saving design, the dissemination of low energy building is required. Therefore, to improve energy efficiency while reducing the usage of the design method is necessary to study actively. BIM-based systems applied to buildings, scheduled to be built by reducing the amount of energy reduction technologies can be analyzed. Depending on various design and equipment to set energy savings goals, you can select an alternative. If it is possible to predict the energy efficiency from the initial stage of design and support designing low energy building, we would be able to expect improvement in the economics of housing due to the reduction of energy consumption.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1945-1950
• /
• 2000

When one build a building that posses Precison production process to be sensitive to vibration and SMD to procuce a large dynamic force, how do one predict & answer vibration control problem at building structure design at first stage, That is a question. It has tried to predict dynamic response and establish answering about global or local dynamic problem in building using experimental and analysis method. One of such a try, it be proposed Semi-Empirial Method that reduce error element of input information about dynamic analysis using dynamic experimental study and measurement data in the basis of real-structure. In this paper, the dynamic response problem about RC-structure building that will be set-up SMD produce large transient dynamic force using Semi-Empirical Method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.11
• /
• pp.812-819
• /
• 2010

Recently residential buildings are characterized with high-rise and high density. Under this circumstance, achieving comfortable and healthy indoor environment with minimized energy consumption becomes a very challenging engineering and societal issue. Along this the increased size and transparency of window as well as light surface caused by high stories lowers the heat shield efficiency of building. Since glass that constitutes building surface has low heat efficiency, it aggravates heat loss of all building considerably, thereby resulting in extreme heating load and cooling load in the country where temperature varies much in summer and winter. The research will check whether experiment can be effectively done by overcoming the limit of existing artificial solar laboratory constructed in the country and properly adjusting controlled variables with simplified function through construction of this experimental set.