• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.153-156
• /
• 2004

This Paper deals with speed control of DC servo motor using a Fuzzy-Sliding observer. Speed sensor detect a speed of rotor continuously. But It have a limit as a driving speed to detect speed precisely. So it is problem to improve the performance of the driving system To solve the problem, it is studied to detect a speed of DC motor without sensor In particular, study on the method to estimate the speed using the observer is performed a lot. In this parer, the gain of the observer is properly set up using the fuzzy control and sliding observer that have a superior transient characteristic and is easy to implement compared the exist ing method is designed. It estimate the derivative of the armature current directly using the armature current measured in the DC motor. It estimate the speed of the rotor using the differentiation. It is Proposed speed sensor less control method using the estimated speed. Optimal gain of Luenberger observer is set up using the fuzzy control and adapted speed control of DC servo motor. It is proved excellence and feasibility of the presented observer from the comparison tested a case with a speed sensor and a case without a speed sensor which used a highly efficient drive and 200W DC servo motor start ing system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.252-252
• /
• 2000

The Resistance Spot Welding (RSW) has been considered as an inherently safe and reliable method far joining metals, and has been widely employed, especially in automobile body assembly shops, as a manufacturing process. In recent years, the requirement for more sophisticated quality control procedures has considerably grown in the mass production industries. The object of the application of servo control to spot welding gun is the improvement of quality control in the spot welding, one of conventional industrial areas. The important factors affecting welding qualities (shear strength, nuggest size, indentation depth) are welding current, welding time, and gun press force. Welding current and welding time are controlled by welding timer. But, the conventional welding guns using compressed air are out of control in changing gun press forces in welding process. In this paper, a servo gun welding system having a AC servo motor and a PC control system is presented. The main object of this paper is to estimate the influence of gun press force changes in the welding process (press time -> welding time -> hold time) to welding qualities, and to evaluate welding qualities in real time, by recognizing the patterns of gun press forces changed in the welding process and comparing with the standard patterns.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.39-46
• /
• 1999

Disturbances acting on the track-following servo system of an optical disk drive inherently contain significant periodic components that cause tracking errors of a periodic nature. Such disturbances can be effectively rejected by employing a repetitive controller, which must be implemented carefully in consideration of system stability. Plant uncertainty makes it difficult to design a repetitive controller that will improve tracking performance yet preserve system stability. In this paper, we examine the problem of designing a repetitive controller for an optical disk drive track-following servo system with uncertain plant coefficients. We propose a graphical design technique based on the frequency domain analysis of linear interval systems. This design method results in a repetitive controller that will maintain system stability against all admissible plant uncertainties. We show simulation and experimental results to verify the validity of the proposed design method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.56-62
• /
• 1999

We make a study of pricisioning apparatus that is used in the various industrial machine. The study was carried out to develope a pricision positioning apparatus, consisting of servo motor and piezoelectric actuator. This system is composed of fine and coarse apparatus, measurement system and control system. Piezoelectric actuator is designed for fine positioning. Coarse positioning using lead screw is drived by servo motor. Control system output a signal from laser interferometer and microsense to amplifier of servo motor and piezoelectric actuator after digital signal processing(DSP). Resolution of this apparatus measure with laser interferometor and microsense so, we can controlled positioning of one output by the coarse positioning in the system. Also we obtain the positioning resolution of 9nm in the system.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.111-116
• /
• 1998

산업 자동화의 고정밀도에 따라 직류서보 전동기는 강인제어가 요구되고 있다. 하지만 PID 제어기를 갖는 전동기 제어 시스템이 부하 외란의 영향을 받게되면 제어 시스템의 강인제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로 본 논문에서는 전동기 제어시스템을 위한 PID-신경망 복합형 제어기법을 제시하였다. 신경망 제어기의 출력은 부하 외란 인가시에 발생되는 오차와 오차 변환율에 의해서 결정된다. 신경망 제어기를 이용한 직류서보 전동기의 강인제어는 시abf레이션에 의하여 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1113-1115
• /
• 1996

The servo system requires faster and more accurate dynamic responses. A new technique for the position control of DC servo motors is presented in this paper. The proposed technique employs a Self Tuning Regulator Proportional Integral Derivative(STR PID) position control systems in order to improve the dynamic performance of a DC servo motor. Recursive -least -squares (RLS) method is used in order to estimate the STR PID coefficients, $K_P$, $K_I$, and $K_D$. In order to consider dynamics such as voltage, angular velocity, and rotor angle, the above method was applied position control system.

• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.453-456
• /
• 2005

본 논문에서는 리얼게인사의 DSP를 사용하는 고속설계시스템에 의한 AC 서보 시스템의 속도관측기 및 속도제어기의 설계에 대하여 소개한다. CEMTool/SIMTool 소프트웨어 프로그램과 RG-DSPIO 제어보드, AC 서보 드라이버와 AUTOTool 프로그램으로 구성되어 있는 "AC Servo-Designer" 시스템이 본 연구에서 사용되었다. "AC Servo-Designer" 시스템은 SIMTool 블록들을 사용함으로써 짧은 시간동안에 다양한 형태의 제어기를 설계 및 구현할 수 있도록 해 주는 장점이 있기 때문에 AC 서보 시스템의 속도 관측기 및 속도제어기를 제어 목적에 따라서 쉽게 설계하고 구현할 수 있다.

• Journal of Welding and Joining
• /
• 제24권6호
• /
• pp.13-20
• /
• 2006

Resistance spot welding is widely used for joining sheet metals in the automotive manufacturing process. Recently, servo-gun is used to increase the productivity and precise control the acting force. However, force control mechanisms have not been investigated with servo-guns until now. In this paper, it is proved that servo-motor current is proportional to torque and by experiment, experimental equation between servo-motor current and electrode force was derived. Algorithm for feedback control of electrode force was suggested using current measurement. In addition, applying soft touch method to this system the impact between electrode and specimen, which is the problem of air gun, could be reduced. Indentation made the force decrease in holding time of resistance spot welding. In order to overcome this problem, force compensation using the servo gun was used and it improved weld strength in good welding current range.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.442-447
• /
• 2003

This paper demonstrates that a modified hybrid neural-genetic multimodel parameter estimation algorithm can be applied to structured system identification of an electro-hydraulic servo system. This algorithm is consists of a recurrent incremental credit assignment(ICRA) neural network and a genetic algorithm. The ICRA neural network evaluates each member of a generation of model and genetic algorithm produces new generation of model. The modified hybrid neural-genetic multimodel parameter estimation algorithm is applied to an electro-hydraulic servo system the task to find the parameter values such as mass, damping coefficient, bulk modulus, spring coefficient and disturbance, which minimizes the total square error.

• 수산해양기술연구
• /
• 제26권1호
• /
• pp.81-87
• /
• 1990

본 논문에서는, 문헌[1]에서 보였던 적분형 서어보계의 구성문제를 목표입력이 선형자유계의 출력으로 얻어지는 경우로 일반화하여 확대계수를 얻고 쌍선형변환법에 의해 폐류우프계를 구성하는 설계법을 제안했다. 본 설계법의 유효성을 확인하기 위해, 전기 서어보기구의 각도 제어에 관한 응용 예를 보였다. 실제적인 서어보 시스템의 설계문제에 있어, 그 폐루우프계의 특성근을 정확한 위치에 배치하기보다는 오히려 어떤 요구하는 과도응답이 얻어질 수 있게 하는 영역내에 배치하면 된다는 의미에서 보면, 본 서어보계 구성법은 그 실제적인 의미가 크다고 할 수 있다.