• Steel and Composite Structures
• /
• v.15 no.4
• /
• pp.379-397
• /
• 2013

Conoidal shells are doubly curved stiff surfaces which are easy to cast and fabricate due to their singly ruled property. Application of laminated composites in fabrication of conoidal shells reduces gravity forces and mass induced forces compared to the isotropic constructions due to the high strength to weight ratio of the material. These light weight shells are preferred in the industry to cover large column free open spaces. To ensure design reliability under service conditions, detailed knowledge about different behavioral aspects of conoidal shell is necessary. Hence, in this paper, static bending, free and forced vibration responses of composite conoidal shells are studied. Lagrange's equation of motion is used in conjunction with Hamilton's principle to derive governing equations of the shell. A finite element code using eight noded curved quadratic isoparametric elements is developed to get the solutions. Uniformly distributed load for static bending analysis and three different load time histories for solution of forced vibration problems are considered. Eight different stacking sequences of graphite-epoxy composite and two different boundary conditions are taken up in the present study. The study shows that relative performances of different shell combinations in terms of static behaviour cannot provide an idea about how they will relatively behave under dynamic loads and also the fact that the points of occurrence of maximum static and dynamic displacement may not be same on a shell surface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1652-1660
• /
• 1999

One of the most important goals in VOD servers is to provide services to more clients with services which clients request. In order to provide service efficiently and rapidly, though considering a few of policies, efficient placement of data when they are stored is direct cause to improve efficiency of retrievals. In this paper, we propose a efficient placement policy, encoded video data being stored in clustered VOD servers. In the proposed placement policy, partitioning a large disk array into smaller disk groups which consists of a few of disks with similar performances, specially disk I/O bandwidth. In last chapter, we compare proposed placement policy with conventional policies, and show the results of improved performances with proposed policy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.119-127
• /
• 2008

In this paper, the influence of the stamping effect is investigated in the performance analysis of a side structure. The analysis covers the performance evaluation such as the crashworthiness and NVH. Stamping analyses are carried out for the center pillar and the side sill made of high strength steels. Then, numerical simulations are carried out in order to identify the stamping effect on the crashworthiness, the natural frequency and the normal mode. The result shows that the analysis of the side structure considering the forming history leads to a different result from that without considering the forming effect. The variation of the system response fully reveals effects of thinning and hardening of members on the performance prediction of vehicle parts. The analysis results demonstrate that the design of auto-body members should be carried out considering the stamping history for accurate assessment of various performances.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.89-94
• /
• 2015

FMS which has a concept that wireless terminal can replace wire terminal services is a technologies that is can provide service costs same as wire terminal in the special zone. Enterprise type of FMC that is developed making up for the weak point is must have to improve voice quality and FMC performance in the soft phone. This paper measure voice quality based on the one way of the total estimated delay time of FMC to carry out IMS services between IP-PBX and FMC soft-phone to operate it's controller optimally and put forward evidence to be in 120ms and 150ms in the VoIP FMC voice quality. To measure FMC performances in four categories evaluated trials and prove its performances.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.18-29
• /
• 2016

In this paper, we discuss the issues of providing protection for point-to-multipoint connections in both Ethernet and MPLS-TP-based packet transport networks. We introduce two types of per-leaf protection-linear and ring. Neither of the two types requires that modifications to existing standards be made. Their performances can be improved by a collective signal fail mechanism proposed in this paper. In addition, two schemes - tree protection and hybrid protection - are newly proposed to reduce the service recovery time when a single failure leads to multiple signal fail events, which in turn places a significant amount of processing burden upon a root node. The behavior of the tree protection protocol is designed with minimal modifications to existing standards. The hybrid protection scheme is devised to maximize the benefits of per-leaf protection and tree protection. To observe how well each scheme achieves an efficient traffic recovery, we evaluate their performances using a test bed as well as computer simulation based on the formulae found in this paper.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.5
• /
• pp.8-13
• /
• 1997

In multi-server environment there are many servers which are able to process job requests. So we bave to design a mechanism that selects appropriate servers for processing each job request while maximizing server throughput and minimizing average response time of requests. Conventional methods ac~ opt the load of each server as criteria of server selection. that is, they select a server whose load is not bigger than the others. In this work we propose an approach that uses the degree of server performance, server load and the estimated service time of requested job as guidelines of server selection. We incorporate fuzzification techniques and expert knowledge in this approach. Comparing the performances c~f our approach to that of conventional one, experiments show that the proposed approach provides better performances.

• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.585-598
• /
• 2022

The monopile-friction wheel hybrid foundation is an innovative solution for offshore structures which are mainly subjected to large lateral eccentric load induced by winds, waves, and currents during their service life. This paper presents an extensive numerical analysis to investigate the lateral load and moment bearing performances of hybrid foundation, considering various potential influencing factors in sand-overlaying-clay soil deposits, with the complex lateral loads being simplified into a resultant lateral load acting at a certain height above the mudline. Finite element models are generated and validated against experimental data where very good agreements are obtained. The failure mechanisms of hybrid foundations under lateral loading are illustrated to demonstrate the effect of the friction wheel in the hybrid system. Parametric study shows that the load bearing performances of the hybrid foundation is significantly dependent of wheel diameter, pile embedment depth, internal friction angle of sand, loading eccentricity (distance from the load application point to the ground level), and the thickness of upper sandy layer. Simplified empirical formulae is proposed based on the numerical results to predict the corresponding lateral load and moment bearing capacities of the hybrid foundation for design application.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.650-658
• /
• 2021

Flexible risers are usually used as conveying systems to bring ocean resources from sea bed up to onshore. Under ocean environments, risers need to bear complex loads and it is crucial to comprehensively examine riser's configurations and to analyze structural dynamic performances under excitation of bottom vehicle motions, to guarantee structural safe operation and required service lives. In this study, considering a saddle-shaped riser, the influences of some important design parameters, including installation position of buoyancy modules, buoyancy ratio and motion of mining vehicle, on riser's configuration and response are carefully examined. Through our FEM simulations, the spatial distributions of structural tensions and curvatures along of riser length, under different configurations, are compared. Then, the impacts of mining vehicle motion on riser dynamic response are discussed, and structural tolerance performance is assessed. The results show that modules installation position and buoyancy ratio have significant impacts on riser configurations. And, an appropriate riser configuration is obtained through comprehensive analysis on the modules positions and buoyancy ratios. Under this proposed configuration, the structural tension and curvature could moderately change with buoyancy modules and bottom-end conditions, in other words, the proposed saddle-shaped riser has a good tolerance performance to various load excitations.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.197-207
• /
• 2013

The purpose of this study is to analyze the effect of controlling consulting service quality in relation to the factors of success and performances of the social enterprises. In order to achieve the objective of this study, securement of market competitiveness, entrepreneurship and network activity was defined to be the factors of success and the research model and hypothesis was set according to the theoretical basis of the factors of success, performances and the quality of consulting services. The results showed that first, securement of market competitiveness, entrepreneurship and network activities as factors of success all had significant effects on performances pertaining to both profit-making and public interest, having great influence on the securement of market competitiveness of the social enterprises. Secondly, as a result of analyzing the effects of controlling the quality of consulting services in relation to the relationship between the factors of success and management performances of the social enterprises, network activity showed to have significant effect on performances pertaining to both profit-making and public interest. Through this study, the importance and the necessity of the improvement of consulting services and network activities of social enterprises were highlighted and the necessity of a new consulting principle in the consulting industry that can be specialized to social enterprises is proposed.

• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.253-258
• /
• 2015

In South Korea, Pinus pumila (Pall.) Regel (dwarf stone pine) has been designated as a critically endangered species by the Korea Forest Service. We have difficulties in obtaining the seeds of P. pumila because P. pumila grows only in the Daecheongbong area (1550–1700 m above sea level) of Mt. Seorak and almost all of its cones are damaged by birds and rodents. For establishing an ex situ conservation stand of P. pumila, this study was conducted to figure out the effects of wet cold (cold stratification, prechilling) and GA₃ treatment on the germination of P. pumila seeds. After cold stratification (1, 2, 3, 4, 5 months), prechilling (1, 2, 3, 4, 5 months) and GA₃ treatment (0, 100, 500, 1,000, 2,000, 3,000 ㎎/L), seeds were placed on petri-dishes at 25℃ under light condition. The percentage of germination, mean germination time and the germination rate were investigated. The results showed that both of the cold stratification and prechilling were effective in improving germination performances. However, there were no significant differences in performances between the two cold treatments. Within each treatment, the germination performances improved with the period of treatment. However, after three months of treatment, the performances showed no significant improvement. The gibberellin treatment was also effective in improving seed germination of P. pumila. The percentage of germination reached 79.0% in the seeds treated with 100 ㎎/L of GA₃. However, the germination performances decreased at high concentration of GA₃ treatments (over 2000 ㎎/L). In conclusion, cold stratification (over 3 months) or 100 ㎎/L of GA₃ treatment was considered to be the appropriate method for seedling production of P. pumila.