• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.250-259
• /
• 2011

Objectives: Intimate partner violence (IPV) is a significant global public health concern, affecting 5.3 million US individuals annually. An estimated 1 in 3 women globally are abused by an intimate partner in their lifetime, and the effects carry over into the workplace. This article examines employers' perceptions of IPV in the workplace, targeting supervisors of Latina employees. Methods: Fourteen employers and supervisors of small service-sector companies in Oregon were interviewed using semi-structured interviews. Interpretive description was used to identify themes. These qualitative interviews preceded and helped to formulate a larger workplace intervention study. Results: The following themes were found and are detailed: (1) factors associated with recognizing IPV in the workplace, (2) effects of IPV on the work environment and (3) supervisors' responses to IPV-active vs. passive involvement. Also, supervisors' suggestions for addressing IPV in the workplace are summarized. Conclusion: These findings demonstrate the need for more IPV-related resources in the workplace to be available to supervisors as well as survivors and their coworkers. The needs of supervisors and workplaces vary by site, demonstrating the need for tailored interventions, and culturally appropriate workplace interventions are needed for Latinas and other racially and ethnically diverse populations.

• Journal of the Korean Society of Safety
• /
• v.15 no.1
• /
• pp.28-35
• /
• 2000

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. So determination of the integrity of the metallic structure is required either to en4sure that failure will not occur during the service life of the components or to evaluate the lifetime extension of the structure. An automated ball indentation(ABI) method was developed as a non-destructive technique for evaluating the integrity of such metallic components. In this paper, we would like to present the aging evaluation technique by the ABI method. The five classes of the thermally aged CF8M specimens were prepared using an artificially accelerated aging method. After holding 100, 300, 900, 1800 and 3600 hours at 43$0^{\circ}C$, the specimens were cooled down using water to room temperature respectively. The tensile test, hardness test, charpy impact test, ABI test were performed. The results of the fracture test were compared with those of ABI test and the new evaluation technique of the integrity of metallic structures was developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.852-857
• /
• 2010

In this paper, we proposed and demonstrated an indoor visible-light communication system using an array of light-emitting diodes (LEDs). The main idea is based on that the LEDs can be used not only for lighting but also for free-space optical communications. Because LEDs offer advantageous properties such as high brightness, reliability, lower power consumption and long lifetime, the indoor visible-light communication systems are going to provide high quality of service by the high radiation power of the LED lighting. Prototype of simplex channel for audio and the full-duplex channel for text message were developed. Results indicates the viability of creating inexpensive free-space optical communication transceivers that might be embedded in commercial light products to supports indoor wireless networking.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.2
• /
• pp.211-220
• /
• 2013

Objectives : This study intended to figure out illegal treatment by unlicensed person in dental area and factors, which were considered as user's position on the basis of the local community investigation of health conditions in chungbuk provinces in 2008. Methods : This study used chi-square test and complex sample design of multi-variate logistic regression analysis to question 12,443 peoples who have experience on illegal dental treatment. Results : Multi-variate logistic regression analysis results showed that factors having related to illegal dental treatment are sex, age, education standards, subjective awareness of oral health condition, drinking experience of lifetime, unmet need of dental treatment, chewing difficulty, use of dentures, experience of scaling and the use of interdental care instrument. Conclusions : As a result of this study, in order to root out illegal dental treatment, we need to expand the breadth of health insurance coverage so that it can reduce the burden of dental expenses. Moreover, we need to set out health service of public oral health to inform the importances of maintaining good oral health and the problems of illegal dental treatment by unlicensed person.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.82-87
• /
• 1999

The basic remote sleeve repair-welding technology by the pulsed Nd:YAG laser for increasing the lifetime of the steam generator tube in a nuclear power plant has been developed. The relationship between the connection width and welding parameters have been investigated for the fundamental research to apply the sleeve-repair-welding technique to the nuclear industry. The Inconel 600 tube and Inconel 690 sleeve used for high temperature and high pressure service were welded as round lap welding by Nd:YAG laser. It was observed that the tensile shear strength, 340MPa of the welded specimen is equivalent to about 60% of that of the base metal (Inconel 600), 550MPa. The difference between the hardness of the base metal and that of the laser welds was about 10%. Ductile fracture was partly occurred in the weld but the cracking has not been observed. In spite of absence of the crack, the strength of welds was not sufficient in terms of the tensile shear strength.

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.566-584
• /
• 2001

In this paper, the progressive deformation and the creep-fatigue damage for the conceptually designed reactor internals of KALIMER(Korea Advanced Liquid MEtal Reactor) are carried out by using the elastic analysis method in the RCC-MR code for normal operating conditions including the thermal load, seismic load (OBE) and dead weight. The maximum operating temperature of this reactor is 53$0^{\circ}C$ and the total service lifetime is 30 years. Thus, the time- dependent creep and stress-rupture effects become quite important in the structural design. The effects of the thermal induced membrane stress on the creep-fatigue damage are investigated with the risk of the elastic follow-up. To calculate the thermal stress, detailed thermal analyses considering conduction, convection and radiation heat transfer mechanisms are carried out with the ANSYS program. Using the results of the elastic analysis, the progressive deformation and creep-fatigue damages are calculated step by step using the RCC-MR in detail. This paper ill be a very useful guide for an actual application of the high temperature structural design of the nuclear power plant accounting for the time-dependent creep and stress-rupture effects.

• Nuclear Engineering and Technology
• /
• v.7 no.4
• /
• pp.295-310
• /
• 1975

A system of model price data for the fuel cost estimation of the Go-ri plant is developed. With the application of MITCOST-II computer code the levelized unit fuel costs over the entire lifetime of the plant are evaluated. It is found that the overall levelized unit fuel cost is 7.332 mills/Kwhe and that the uranium ore and enrichment service represent more than 85% of the unit cost, assuming a simple once-through fuel cycle process with no reprocessing of the spent fuel. The effects of the cost fluctuations in these fuel cycle elements and the capacity factor changes are also evaluated. The results indicate that the fuel costs are most sensitive to the variation of uranium ore price. Efforts must, therefore, be employed for the arrangement of cheap and timely supply of uranium ore in order to achieve the economic generation of nuclear power.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.71-81
• /
• 2002

Today's environment of enterprise is changing. They have to face customer' demands with the right product, the right service and supply them at the right time. And also cut down logistics and inventory cost and bring up the profit as much as they can. This means the change of putting enterprise first in importance to putting customer first importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management. In the Supply chain, The ATP function doesn't only give customers to conformation of delivery. It can be used by the core function with ATP rule that can reconcile supplies and demands on the supply chain. Therefore We can be acquire the conformation about on the due date of supplier by using the ATP function of management about real and concurrent access on the supply chain, also decide the affect about product availability due to forecasting or customer's orders through the ATP. In this paper, It consolidates the necessity on a CTP and analyzes data which is concerned of ATP. Under the these environments, defines the ATP rule that can improve the customer value and data flow related the LTV(Life Time Value) and builds on a algorithm.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.1
• /
• pp.37-42
• /
• 2004

In the reinforced retaining wall system, non-woven geotextiles are placed at the face of reinforced earth until the facing blocks are built up. And when this system is used as temporary structure, geotextiles facings are exposed to sunlight during service lifetime. During these periods, degradation of nonwoven geotextiles are occurred by UV light. So the UV-resistance of nonwoven geotextiles must be assessed correctly, in considering of the site conditions. In this study, laboratory test and the field test have been performed to evaluate the UV resistance of non-woven geotextiles used in KOESWall system and the results are expressed in terms of tensile characteristics & SEM photographs.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.53-56
• /
• 2014

In the satellite system design, the design processes from the initial design to launch take about 5 years and the broadcasting satellite lifetime goes over 15 years. Furthermore, global warming phenomenon causes rainfall rate to increase more and more in some regions on the earth. Consequently, at the stage of the satellite link design, we need to consider the future rain attenuation over 20 years. In this paper, we investigated a time-series system model for forecasting to consider the future rainfall rate for the satellite broadcasting service. We found that rainfall rate of the future 20 years is increasing continuously.