• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.102-112
• /
• 1997

This paper describes the method that can construct kinematically admissible velocity fields for forging of gear-like components which have tooth shape around the cylinder. The kinematically admissible velo- city fields for the various gear-like components, involute spur gear, trapezoidal spline, square spline, ser- ration and trochoidal gear, were constructed by pilling up the velocity components according to the shape of tooth and billet. The billets, of hollow and solid, were Al 2218 and 2024. To verify the method, the analyses and experiments were carried out and compared with each other. For analyses, the half pitches of com- ponents were divided into several deformation regions based on their tooth profile. A neutral surface was used to represent the inner flow of material during forging. Its location varied with the energy optimazation and its contour varied with the number of teeth. In experiment, the contour of material filling up the tooth zone is hyperbolic curve caused by the frictional drag on the interface of die-wall/workpiece but, in the analysis, it is an arc which retains the same contour during all forging operation.

• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.9-25
• /
• 1977

As a successive work of the variation studies of natural Pinus densiflora stands, some characteristics of individual trees of the three natural populations selected from the Kwang-won Province, the middle-east part of Korean peninsula, as shown in the location map, were investigated. And the statiscal differences between individuals within population, and between populations were analysed. Twenty trees from each population were selected for this study purpose. Doing this, those trees lagged in growth, usually showing poorer form, were eliminated. The results obtained are summarized as follows: 1. Though the average population ages had the ranage between 50 and 63, the growth of height or diameter was similar. Population No.9 is, however, considered to have better tree forms at glance. Population No.8 showed the heighest value not only in the clear-stem-length ratio. 0.53 but also in the crown-index 0.91. The higher value can be result from those trees having long lateral branches and relatively short crown height, meaning undesirable crown shape. In regard to the fine branchedness and the acuteness of branching angle, the population No.9. is considered to be a better one, whereas there was almost no difference in crown height among populations. 2. Checking the frequency distributions of the ratio of the clear-stem-height to the total height and the crown-indices, some difference between populations are considered. These might be attributed to the previous way of stand mangement which alters the density. 3. In the serration density, the average number of 54 per 1cm needle length, the significant differences exist between individual trees within population but not between populations. A few trees which extremly high serration density were observed. As in serration, so tendencies were in the number of stomata row and resin duct. 4. The population 8 had the resin duct index value of 0.074 as the highest which was twice or triple of the other ones. 5. The patterns of increasing process of the average 10-year-ring-segment were not similar till the 30 years of age, but beyond this, the tendency lines were aggregated. 6. Regading the average summer wood ratio, no diffrence between populations, but in the ranges, i.e. 23 to 30 in population No.8. and 16 to 36 in population No.9., with regad to the specific gravity of wood, there were hardly observed any difference between populations even in the ranges values. As the increase of tree ages, the increase of specific gravity was followed but the increasing patterns were not similar between populations. 7. No significant differences between populations in the average tracheid length and the range were detected. However, the length was increased according to the age increase. The increasing pattern was same between populations.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.3
• /
• pp.1125-1131
• /
• 2014

Background: Schistosomiasis is a parasitic disease causing chronic ill health in humans with a serious consequences for socio-economic development in tropical and subtropical regions. There is also evidence linking Schistosoma mansoni to colonic carcinoma occurrence. The aim of this study was to evaluate some inflammatory and oxidative stress biomarkers, as well as L-fucose as linkers between intestinal schistosomiasis and colonic dysplasia development in mice. Materials and Methods: This study was conducted upon 80 mice that were divided the control group (10 non infected mice) and infected group which was subdivided into 7 sub-groups (10 mice each) according to the time of sacrifaction in the post infection (p.i.) period, 10 mice being sacrificed every two weeks from 6 weeks p.i. to 18 weeks p.i. Tumor necrosis factor alpha (TNF-${\alpha}$), inducible nitric oxide synthase (iNOS), and pentraxin 3 (PTX3) levels were estimated by immunoassay. The L-fucose level, and thioredoxin reductase (TrxR) and lactate dehydrogenase (LDH) activities were also evaluated in colonic tissue. Results: The current study revealed statistically significant elevation in the studied biochemical markers especially at 16 and 18 weeks p.i. The results were confirmed by histopathological examination that revealed atypical architectural and cytological changes in the form of epithelial surface serration and nuclear hyper-chromatizia at 14, 16 and 18 weeks p.i. Conclusions: inflammation, oxidative stress and L-fucose together may form an important link between Schistosomal mansoni infection and colonic dysplasia and they can be new tools for prediction of colonic dysplasia development in experimental schistosomiasis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.847-864
• /
• 1988

The main purpose of this study is to investigate the local velocity acceleration in a boundary layer diffusion flame over a flat plate. In order to know the effect of separation on the local velocity acceleration, two typical cases, flows with and without separation, are considered. For these cases, flow visualization using paraffine smoke tracers has been made. Mean velocity and r.m.s. value of fluctuating velocity are measured by using a laser Doppler velocimeter. In addition, measurements of time-mean concentration and time-mean temperature have been made. Time-mean density profiles have been obtained from the data of concentration and temperature. The obtained results are summarized as follows : (1) In the case without separation, the local velocity acceleration is clearly observed near the visible flame zone for all flow conditions. On the while, in the case with serration, the local velocity acceleration is observed only at low free stream velocity and high fuel injection velocity. As increasing the free stream velocity or decreasing the fuel injection velocity, it is not distinctly observed in the mean velocity profile. (2) The r.m.s. value of fluctuating velocity is significantly decreased by combustion in the case with separation. But in the case without separation, the r.m.s. value is increased near the visible flame zone in comparison with cold flow. In both cases, the peak value of r.m.s. appeared just at the visible flame zone, where the mean velocity gradient is not too high.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.257-262
• /
• 2017

As the size of electric products such as mobile phones and smart watches decrease, the bolts used to assemble these products should also be miniaturized. A miniature-sized bolt has to provide sufficient joining torque and anti-releasing torque to keep the components together. We studied a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-releasing torque. In a serrated bolt, a serrated shape is formed on the bottom surface of the bolt head to create an obstacle to releasing. In this study, finite element analyses for the joining and releasing of bolts were carried out, and the anti-releasing performance was predicted. Based on the results of analyses using various numbers of serrations and fastening depths, the effects of the number of serrations and fastening depth on the anti-releasing performance were investigated.

• Microbiology and Biotechnology Letters
• /
• v.13 no.4
• /
• pp.321-327
• /
• 1985

Cultivation conditions for the production of extracellular alkaline protease by a nonpiamentation Serratia sp. and purification of the enzyme were studied. The maximum enzyme level was obtained at the beginning of stationary phase when the organism was cultured on brain heart infusion medium at $25^{\circ}C$ under aeration (gyratory shaking, 180 cycles/min). The enzyme was purified about 100 fold with 16.5％ yield by ammonium sulfate precipitation, ammonium sulfate fractionation followed by DEAE-cellulose chromatography (1st and 2nd). The purified enzyme moved as a single symmetrical peak in the analytical ultracentrifuge. The enzyme demonstrated its maximum activity at pH 8.5-9.0 and 4$0^{\circ}C$ when vitamin-free casein was used as a substrate.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.121-127
• /
• 2011

The mechanical properties of the various heat treatment conditions on Ti-15Mo-3Nb-3Al-0.2Si alloy plates were examined. XRD patterns from the surface of Ti-15Mo-3Nb-3Al-0.2Si were analyzed as a solution-treated Ti alloy has the single-phase ${\beta}$ structure whereas the aged Ti alloys have the ${\beta}$ matrix embedded with ${\alpha}$ needles. High strength (~1500 MPa) with decent ductility (7%) was obtained by the Ti alloy double aged at $300^{\circ}C$ and $520^{\circ}C$ for 8 hours each. The double-aged alloy exhibits the finer structure than the single-aged alloy at $300^{\circ}C$ for 8 hours because of the higher nucleation rate of ${\alpha}$ needles at an initial low aging temperature ($320^{\circ}C$). TEM observation revealed that the fine nanostructure with ${\alpha}$ needles in the ${\beta}$ matrix ensured the excellent mechanical properties in the double aged Ti-15Mo-3Nb-3Al-0.2Si alloy. In the solution treated alloy, the yield drop, stress-serrations and the ductility minimum typically associated with dynamic strain aging can be attributed to the dynamic interaction between dislocations and oxygen atoms. The yield drop and the stress serration were not observed in aged samples because the geometrically introduced dislocations due to phase precipitates suppressed the dynamic strain aging.

• Wind and Structures
• /
• v.33 no.6
• /
• pp.463-470
• /
• 2021

This study investigates the aerodynamic characteristics of NACA series airfoil by altering the trailing edge in the form of extended and serrated sections. This contemporary advent examined NACA 0020 airfoil experimentally at the angle of attack ranging from 0° to 45° and for the Reynolds number of 2.46 × 105. To figure out the flow behaviour, the standard average pressure distribution over the airfoil surface is estimated with 50 pressure taps. The time series surface pressure is recorded for 700 Hz of sampling frequency. The extended trailing edge of 0.1 c, 0.2 c and 0.3 c are attached to the base airfoil. Further, the triangular serration is introduced with the base length of 2 cm, 4 cm and 6 cm. Each base length with three different amplitudes of 0.1 c, 0.2 c and 0.3 c were designed and equipped with the baseline case at the trailing edge and tested. The aerodynamic force coefficient, as well as pressure coefficient are presented. The obtained data advises that modification in the trailing edge will reflect the aerodynamic characteristics and the flow behaviour over the section of a wing. Resultantly, the extended trailing edge as a thin elongated surface attached to a base airfoil without revising the main airfoil favors good lift increment. The serrated trailing edge acts as a flow control device by altering the flow pattern results to delay the stall phenomenon. Besides it, improves lift co-efficient with less amount of additional drag. This extended and serrated trailing edge approach can support for designing the future smart airfoil.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.446-452
• /
• 2005

In order to examine the natural distribution variations between groups of the Stewartia koreana, the leaf form characteristics of the investigation sites were analyzed by each group. As a result, the Mt. Kumsan group showed a smaller value in leaf length, width, area, and the number of veins, but not in the petiole length and serration number. Among each character, the coefficient of variation(CV) of the characters excluding petiole length and leaf area was in a comparatively narrow range, from 11.6~17.4%. On the other hand, the CV of petiole length and leaf area between the groups was 34.9% and 28.4% respectively. The CV of these characters within the group was also extraordinary- petiole length showed 29.5~42% and leaf area showed 27.7~40.7%. Also, the simple correlation analysis between 12 leaf characteristics showed that the correlation between leaf width and leaf area was high (r=0.975). The correlations between leaf length and leaf area, between leaf length and leaf width were 0.971 and 0.969, respectively. A negative correlation between angle of leaf base and ratio of leaf length to leaf width was discovered (r= -0.843), meaning that the ratio of leaf length to leaf width decreases as angle of leaf base increases. A cluster analysis was enforced among leaf characteristics of the selected group as a standard on the similarity of quantitative, qualitative measurements. The results showed that at a 0.4 distance level, the subjects could be classified into 4 groups. Group 1 was the Mt. Jogyesan and Mt. Kayasan group, group 2 was Mt. Paegunsan, group 3 was Mt. Unmunsan and Mt. Mudungsan, and group 4 was Mt. Kumsan. At a distance level of 0.6, the subjects were classified into two groups. Group 1 was the Mt. Ktimsan group and group 2 was Mt. Mudungsan, Unmunsan, Paegunsan, Kayasan, and Cogyesan. Especially the Mt. Kumsan group had the smallest value in the leaf characteristics of leaf length, width, area, and the number of veins, showing an obvious difference from the other five groups. There were five principal components that had a meaningful eigenvalue over 1.0 among the 12 extracted components. The explanatory power of the top two main components (leaf length and width) on the total variation was 52.7%. The explanatory power was 91.3% when all 5 main components were included.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.40-49
• /
• 2010

This study was conducted to examine genetic variation on leaf characteristics of Zelkova serrata populations. Leaf samples were obtained from eighteen populations and fourteen leaf characteristics such as leaf blade length, leaf width, leaf area and etc. were measured. In all leaf characteristics, there were significant differences among populations and among individuals within population. Most variance of leaf characteristics was contributed to among individuals within population except for length from leaf base to maximum width (x3) and the ratio of x3 to leaf blade length (x10). The relatively high variations of leaf characteristics were found at Gurye, Jungeup and Gyungju populations while Youngwol, Cheongsong, Youngchun populations showed the lower variation. There was high correlation among leaf characteristics related to leaf size, but not among the variables of ratio between leaf characteristics. Length from leaf base to maximum width(x3) and the ratio of x3 to x10 showed significant positive correlation with latitude and altitude of populations, which reflect the differences of mean annual temperature among populations. Mean annual rainfall of populations showed negative correlation with leaf blade length, leaf width, length from apex to first serration and leaf area. Four principal components (PC) were deduced from principal component analysis, which explain the 88.5% of total variance of leaf characteristics. Leaf area, length from leaf base to maximum width, serration number and petiole length showed the highest contribution to PC1, PC2, PC3, PC4, respectively. According to cluster analysis, the populations of Z. serrata were divided into two groups, which reflect the difference of mean annual temperature between groups. Within group, however, specific tendency of clustering was not observed among populattions.