• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.417-422
• /
• 2001

Every ship might be exposed to collision, grounding and/or various accidents. They may make some underwater holes on the hull. An underwater damage would cause her loss of buoyancy, trim, and inclination. Although a ship has some provisions against these accidents, if the circumstance is serious, she would be sunk or upsetted. Because of varieties of type of accidents, one could not prepare all of them. Many subdivision could prevent them, but it is difficult to realize it due to rising costs. This paper deals with physical phenomena of sinkage and an application on box type ship, and some results are earned as follows； 1. sinkage speed up to the level of the damage hole is increased proportionally, and is decreased proportionally after filling the level. 2. the curve of draft shows cup type of second order polynomial up to the damage hole level, and shows cap type of second order polynomial after filling the level. 3. if damage occurs beneath half of the draft, changes of head and displacement, and sinking speed follow almost straight lines. 4. by careful observation, sinkage speed could be predicted.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.47-56
• /
• 2015

Recently, the domestic air construction site is shortened rapidly, Ltd. is inevitable for reasons such as reduced air according to client's demands have been made. Accidents that occur during rapid construction is a situation that occurs accordingly indispensable. In the rapid construction and a study about the impact on safety and prevention measures and to contribute to accident prevention.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.13-25
• /
• 2005

As there are more accidents which are more serious in construction site than other industries, it needs the safety management system to be SLIM on the same time, There are still lots of difficulties to prevent those accidents exactly, so it also needs a safety supervision team to prevent the accident, unsafe operation and condition before happening, which is also called as a Man-to-Man safety management method. The range of the job site in one personnel's management is very big and large, so it needs the personnel to keep watch the safety operation and prevent any unsafe/fire accidents. Also the personnel also should find out the unsafe points in the job site, and carefully supervise the dead angle site, then support the totally safety management POINT and realize the ZERO accident.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.150-157
• /
• 1999

Developed in the study is the analysis of human factors involved in accidents of Korean Construction Projects. The 556 cases are sampled from a survey material 'Serious Accident Cases in the Construction Projects' edited by Korea Industrial Safety Corporation in 1995 through 1997. The analysis of these cases shows that existing classification system is not good for practical applications in real spots since they are difficult for engineers to understand. In this paper, human factors are classified into three groups by extracting the analysis and arrangement of the cases. Futhermore, We'll propose here a new type of accident which is subdivided. If engineers use this type of accident, they will be probably able to analyze efficiently human factors which are involved in accidents and relatied with how it happen. In the case of fall and upset accidents, personal factors seem to be critical when workers are horizontally moving in an unstable manner, and vertically moving without boarding facilities. Futhermore work environmental factors are important when workers release some materials and are performing building and dismantling tasks.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1412-1414
• /
• 2004

Railway takes an important role of transporting massive passenger and freight. Accidents which occur related to trains have a risk of serious loss of lives, so those accidents need to be controlled urgently. Therefore moving picture transmission system is required which transmits exact information of moving picture of accident status to CTC and also communication line is also required with it. By using WTB line as a wayside transmission line, railway telephones, fax and train service information are provided to local offices. As transmission line improving project, optical cabling work is being processed by phases. Therefore optical fiber line is more effective way for a communicating way between stations than coaxial transmission line. This paper consider's connecting method when optical fibers is used for moving picture data transmission of train accidents and its problems.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.890-896
• /
• 2009

In past projects, the main goal has been to enhance efficiency by reducing cost and time. However, considering the current condition of safety management in many construction companies, it can be confirmed that safety management has not been a top priority for a long time. Current safety management, which is based on safety standards and rules, is very ineffective and only emphasizes management after an incident. As well, although fewer accidents occur compared to the past, because construction projects are increasingly large in scale and complex, these accidents tend to be more serious and involve greater monetary loss. Furthermore, as the severity of these accidents increases, so does the possibility of fatalities. Therefore, improving safety management is essential. This study proposes an effective program for safety management, focusing on the processes to connect studies and systems, and the basic techniques required for program development. To realize this program, technical tools are suggested, including systems such as BIM (Building Information Modeling); additionally, the coordination of other systems such as an RTLS, a server, and an alarm system is proposed.

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.2
• /
• pp.67-86
• /
• 2007

This study is about the drunken drivers' accident patterns and behavior and aims at providing basic data for developing measures to secure safety against accidents by drunken drivers and programs to cultivate good drinking habits. For this purpose, this study conducted a questionnaire of 800 persons over 20 years of age in the selected 20 companies with more than 30 employees in the 4 regions(Daegu, Masan, Changwon, and Jinhae) and analysed the 653 sheets except invalid ones among the returned 673 survey sheets in total(return rate 84.13%), and the researcher conducted a man-to-man interview with each subject from June 20th to July 31st 2006. The result are as the following. As the experience of causing an accident by drinking, the 79.1% of them had the experience, and in case of the subjects with excessive drinking over 4 times a year, the rate of the accident by drinking showed as high as 90.5%. As the patterns of accidents, in male subjects, violence(38.5%) and traffic accidents(37.1%) showed high, while in the female, hurts from falls and fall accidents(40.2%) were found be high. In case of the traffic accidents among the accidents by drinking, the rate of causing serious damage to the life was found to be 89.3%, so it showed that the traffic accidents caused by drinking were influencing on the life much. In conclusion, the drinking problem may be controlled by each individual's will, but without change of social environment and system around people, the problem can not be eradicated. Therefore there should be social infrastructure which can help people to actively live their life with exercises and hobbies, and in order to prevent the reoccurrence of a drink accident, and social structure in which there are education programs for drink accident causers and one can change the perception about drinking culture, should be formed.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.811-816
• /
• 2022

Even though continuous management and supervision of reinforcement of policies to safeguard accidents at workplace and work sites were implemented. Accident prevention activities such as inspection and diagnosis are urgently required to induce a preliminary investigation to identify the risk factors for each type of work, before the work task to eliminate risks at the worksites. Since safety inspections at work sites were generally conducted through visual inspections, the results of safety inspections may vary depending on the findings and proficiency of the safety officers. The results of those inspections may have loopholes to prevent potential accidents at work. Therefore, the purpose of this study was to develop a risk identification checklist that can effectively perform safety inspections to prevent accidents at work sites. This study initially analyzed the previously developed accident checklist to identify current complications and issues in safety checklists. Based on the findings of major industrial accidents over the past three years, the relationship between accident, workplace, and work type were analyzed refereeing the safety inspection standards. A risk recognition-checklist was developed to provide basic data on identifying risk factors, and inspection guidance at work sites. To prepare for potential accidents by identifying and taking countermeasures to mitigate the high risk and serious accidents at sites by the guidelines of the checklist. The developed inspection checklist has been practically used by experts at work sites to perform safety inspections, and it has been verified its suitability, and feasibility, to prevent or mitigate workplace accidents, including securing the safety and health of field workers. The role of the developed safety checklist has been considered effective at worksites.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.164-174
• /
• 2008

As buildings become larger, higher and more complex in most construction sites, construction projects have to deal with transportation of more materials, labor and equipment, necessitating more use of construction equipment. Notably, in the high-rise building and plant construction projects mobile cranes are adopted more frequently among different types of construction machinery, which also results in serious industrial accidents relating to the use of crane. To reduce serious industrial accidents involving cranes, researches on its stability is in need. The research herein aims to study how to select sling and lug of mobile crane and review its stability. The research outcomes herein will make considerable contributions to selecting mobile cranes efficiently and ensuring their stability.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.2
• /
• pp.51-59
• /
• 2017

Steam jets ejected from a rupture zone of high energy pipes may cause damage to adjacent structures. This event could lead to more serious accidents in nuclear power plants. Therefore, to prevent serious accidents, high energy pipes of nuclear power plants are designed according to the ANSI / ANS 58.2 technical standard. However, the US Nuclear Regulatory Commission (USNRC) has recently pointed out non-conservatism in existing high energy pipe fracture evaluation methods, and required the assessment of the unsteady load of the jet caused by a potential feedback mechanism as well as the impact range of steam jet, the jet impact loads and the blast wave effects at the initial breakage stage. The potential feedback mechanism refers to a phenomenon in which a vortex formed by impingement jets amplifies vortex itself and induces jet vibration in a shear layer. In this study, CFD methodology using the LES turbulence model is established and numerical analysis is carried out to evaluate the dynamic behavior of impingement jets and the potential feedback mechanism during jet impingement. Obtained results have been compared with an empirical correlation and experiment.