• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1114-1118
• /
• 1992

This paper deals with the analysis of the electronic ballast which is based on half-bridge type series inverters. First, design basis was described for the determination of the values, L and C. Next, the operation of the electronic ballast was analyzed theoritically. Finally. the digital simulations and experiments were carried out to prove the obtained theoritical results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.71-75
• /
• 1993

The Modeling analysis and design of a high frequency LC-type series and LLCC-type parallel resonant converter oprating in the continous conduction is presented. The state-plane diagram representation of the converter response gives and good insight into the converter operation. A set of characterisric frequency are plotted which design parameters can be obtained.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.366-373
• /
• 2012

In this paper, serious changes in the electromagnetic environment with increasing power and energy capabilities for electric driving and military mission are discussed. Design and control strategies on the Electro-Magnetic Compatibility(EMC) for the series hybrid electric vehicle are proposed to minimize the effects of electromagnetic interferences.

• Communications for Statistical Applications and Methods
• /
• v.15 no.3
• /
• pp.379-386
• /
• 2008

In this paper, the choice of a primary resolution and wavelet basis functions are introduced under random or irregular design points of which the sample size is free of a power of two. Most wavelet methods have used the number of the points as the primary resolution. However, it turns out that a proper primary resolution is much affected by the shape of an unknown function. The proposed methods are illustrated by some simulations.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.129-135
• /
• 2005

At present, fatigue design of welded structures is primarily based on a nominal stress or hot spot stress approach with a series of classified weld S-N curves. Although well accepted by major industries, the nominal stress based fatigue design approach is cumbersome in terms of securing a series of S-N curves corresponding to each class of joint types and loading modes. The hot spot stress based fatigue design has a difficulty of finding a proper stress through the global model, the midium size model, and the detail model of ship structure. Also, it is difficult to link proper displacements within three different mesh size models. Recently, the structural stress is proposed as a mesh-size insensitive structural stress definition that gives a stress state at weld toe with relatively large mesh size. However, this method requires an experimental validation in obtaining the fatigue strength of weldments. Therefore, in this study, a series of experiment is performed for various sizes of weldments.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.38-41
• /
• 2001

To reduce the wasted power with using an OP-AMP, 3 circuit supplying the same amount of power to load through overall voltage range can able proposed. With this type of design, the power that induced to the devices in the circuit will be reduced, we can also develope a small size power supply with the OP-AMP developed using this design. If we need a OP-AMP needed to handle higher power than usual, another design technique can be proposed. With substituting one device with the devices connected in series, the power loaded to each devices in the series devices can be reduced. This thesis contents the design of an OP-AMP to use in high power fields with small thermal dissipation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.1
• /
• pp.7-14
• /
• 2017

This study carried out a numerical analysis of the effects of hot waste water supply on the performance of a Type II absorption heat pump. There are two types of hot waste water supply, regular series flow and reverse series flow. Also it investigated the interaction between each type of flow and heat exchange solutions. As the effectiveness of heat exchange solutions increase, the steam generation and (COP) increase as well. If the effectiveness of a heat exchange solution is lower than 0.566, the steam generation rate of the reverse flow is lower than that of the regular series flow. A high effectiveness of heat exchange solution is therefore required to make a larger amount of steam in reverse series flow than with ordinary series flow. The COP difference between the two types of flow decreases with the increasing effectiveness of the heat exchange solution. Thus, a reverse flow type absorption heat pump can match the high steam generation rate and COP of the ordinary flow type when a highly effective heat exchange solution is applied.

• IE interfaces
• /
• v.7 no.2
• /
• pp.25-30
• /
• 1994

ISO 9000 is a series of several standards(ISO 8402, 9000, 9001, 9002, 9003, 9004,...). ISO 9000 is a standard explaining fundamental concepts, defining important terms, and providing guidance for selecting among the other standards. ISO 9001, the most comprehensive standard to ensure quality in design, development, production, installation, and servicing. ISO 9002 is used to assure conformance to specification, installation and servicing. ISO 9003 has the least requirement among three standards and applies to inspection and final testing. ISO 9004 is a standard developed for internal use only and not applicabe to contractual arrangements. In this paper, quality system requirements for ISO 9000 series are also specified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.801-809
• /
• 2000

Until recently as a method of repairing leaking problem, generally urethane series were used for many structures as subway, box culvert etc. However the lacking of sufficient penetration capacity have made it difficult to repair such structures completely. Now, we could achieve enhanced quality of repairing work by using new material which was compounded of urethane series and cement series properly. This material can penetrate concrete structure efficiently and move interactively with the structure in case of the thermal expansion. Besides of this, we could prevent expecting leakage through several improvements on the aspects of design, materials and site implementation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.172-176
• /
• 1989

In this paper, a simple method for designing iterative learning control scheme is proposed. The proposed learning algorithm is designed based on series expansion of inverse plant model. The proposed scheme has simple structure and fast convergency so that it is suitable for implementing it on conventional micro processor based controllers. The effectiveness of the proposed algorithm is investigated through a series of computer simulations.