• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.123-131
• /
• 2002

ASC(Avionics System Computer) was developed to control weapon delivery and navigation sensors, and to perform man-machine interface with pilots for XKO-1 aircraft. The data communications between ASC and UFC(Up Front Controller), DC(Data Concentrator) were implemented by RS422 serial data bus. Also, SCIL(Standard Computer Interface Library) was designed to facilitate control and management of the computer hardware resources and is embedded in the ASC. These structures have a merit of noise immunity and a reduction of wire harness for signal lines, and enable OFP(Operational Flight Program) programmers to use the SCIL easily without knowing hardware details. Manufactured system was on installed on XKO-1, and peformed for BIT(Built In Test) and interface test with UFC and DC. The test results show that it meets the system requirements.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.677-679
• /
• 1998

멀티미디어 통신이 원활히 이루어지기 위해서는 큰 대역폭과 일정한 전송능력을 보장해 줄 수 있는 통신 네트웍이 필요하다. 최근 표준화된 1394직렬버스는 일정 대역폭을 보장해주는 등시성 전송모드가 있어 멀티미디어 통신수단으로 각광받고 있다. 본 논문에서는1394직렬버스가 가지는 비동기 전송 모드와 등시성 전송모드, 그리고 주조 체계등 몇가지 특성에 대하여 알아보고, 이와같은 특성을 활용하여 고성능 화상전화시스템을 구현하고, 그 유용성을 살펴보도록 한다.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.199-201
• /
• 2005

USB has arguably become the most successful PC peripheral interconnect ever defined. As appearing UWB, wireless USB (WUSB) emerges very popular technology. However, the distributed Medium Access Control (MAC) does not harmonize with the topology of WUSB. In this paper, we address a novel MAC protocol for conformity with WUSB. The protocol is to handle negotiation on Distributed Reservation Protocol (DRP) including the channel time slot of WUSB.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.472-474
• /
• 2005

In WDM/SCM-PON system more than thousand signals must be gathered to monitor for operation. We have implemented IEEE STD 1149.1 JTAG serial interface bus to gather and monitor analog signals. Required area is just $5{\times}5mm^2$. Gathering time per one signal is $1.75{\mu}$ second. Performance to gather is better than that defined in SFF-8472.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.1
• /
• pp.61-66
• /
• 2015

Force feedback control is investigated for improving the quality of the haptic feedback in virtual reality applications. We proposed method for control of the haptic device using universal serial bus. and evaluated the characteristics with experimental set.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2665-2667
• /
• 2002

Force feedback control is investigated for improving the quality of the haptic feedback in virtual reality applications. We proposed method for control of the haptic device using universal serial bus(USB), and evaluated the characteristics with experimental set.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.600-603
• /
• 2000

In this paper, we propose the design method of distributed control system using Controller Area Network (CAN). CAN is an advanced serial communication protocol for distributed real-time control systems. It is a contention-based multi-master network whose timeliness properties come from its collision resolution algorithm which gives a high schedulable utilization and guaranteed bus access latency. With proposed method using CAN, we apply to robot controller. The effectiveness of proposed method is demonstrated by the simulation and experiment.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.295-300
• /
• 2007

The Linux-based embedded systems such as mobile telephones. PDAs and MP3 players are widely in use. USB(Universal Serial Bus) is the interface for data communication between the computers and these peripheral devices. Some embedded systems like intelligent home networking and multimedia streaming require guaranteed QoS(Quality of Service), which is needed for real time transmission of UDP/IP messages through USB. Although USB Ethernet driver is supported by USB Gadget API in Linux, it is unable to provide the desirable QoS required by each type or small embedded systems due to the unpredictability or TCP/IP Stack in Linux. This paper proposes IP-Over-USB to improve QoS of UDP/IP message transmission in the embedded systems using USB in Linux system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1330-1335
• /
• 2013

In recent years, the need to simultaneously transmit a variety of signals, such as DVI(Digital Visual Interface), audio, video, USB(Universal Serial Bus), LAN from the computer is required. So the cable complexity and scalability issues have been raised. In this paper, this signal can be distributed using a single USB cable, computer, video, audio, USB, LAN, one USB multi-signal transmission system was designed and implemented. USB multi-signal transmission was implemented in order to convert a single DVI, audio, and multiple USB, LAN, USB signal converter modules. This USB DVI port supports up to 1920 * 1080 resolution. USB multi-signal transmission system by sending multiple signals into a single cable installation costs of the various cable and using the replication feature of the screen, will provide schools and institutes, etc., providing the convenience of the river, and the scalability of computer peripheral ports.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1102-1110
• /
• 2007

In this paper, we design the FPGA (Field-Programmable Gate Array) of the CAMB (Constant-Amplitude Multi-code Biorthogonal) modulation, and implement the SoC (System on Chip). The ASIC (Application Specific Integrated Circuit) chip is be implemented through targeting and board test. This 12Mbps modem SoC includes the ARM (Advanced RISC Machine)7TDMI, 64Kbyte SRAM(Static Random Access Memory) and ADC (Analog to Digital Converter)/DAC (Digital to Analog Converter) for flexible applications. Additionally, the modem SoC can support the variable communication interfaces such as the 16-bits PCMCIA (Personal Computer Memory Card International Association), USB (Universal Serial Bus) 1.1, and 16C550 Compatible UART (Universal Asynchronous Receiver/Transmitter).