• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.361-368
• /
• 2010

In this paper, the parallel algorithm using MPI(Message-Passing Interface) library is introduced in order to improve numerical efficiency for the staggered method for nearly incompressible and impermeable porous media which was introduced by Park and Tak(2010). The porous media theory and the staggered method are also briefly introduced in this paper. Moreover, we account for MPI library for blocking, non-blocking, and collective communication, and propose combined the staggered method with the blocking and nonblocking MPI library. And then, we present how to allocate CPUs on the staggered method and the MPI library, which is related with the numerical efficiency in order to solve unknown variables on nearly incompressible and impermeable porous media. Finally, the results comparing serial solution with parallel solution are verified by 2 dimensional saturated porous model according to the number of FEM meshes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.101-110
• /
• 2004

Flight and Qualification Models of Single Board Computer (SBC), called On-Board Computer (OBC), for HAUSAT-l picosatellite, which is scheduled to launch on September, 2004 by Russian "Dnepr" launch vehicle, have been developed. The OBC of HAUSAT-1 has been designed with some improved features compared to other picosatellites. A multifunctional controller and up-to-date SPI (Serial Peripheral Interface) and 1-Wire interface are implemented to simplify the harness routing and to minimize the mass and size of OBC. The improved fault-tolerant architecture design methodology is incorporated in the HAUSAT-1 OBC to protect against space radiation environment. The functions of the OBC were fully tested and verified by the Electrical Test Bed (ETB) model. This paper is also addressing the environmental test results, such as random vibration and thermal vacuum tests.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.279-283
• /
• 2012

In is paper, we design and implement the low power, high speed touch screen controller that calculates and outputs the coordinate of touch point on the touch screen of mobile devices. The system clock is 10HMz, the number of input channels is 21, standby current is $20{\mu}A$, dynamic range of input is 140pF~400pF and the response time is 0.1ms/frame. It contains the power management unit for low power, automatic impedance calibration unit in order to adapt to humidity, temperature and evaluation board, adjacent key and pattern interference suppression unit, serial interface unit of I2C and SPI. The function and performance is verified by using FPGA and $0.18{\mu}m$ CMOS standard process. The implemented touch screen is designed for using in the double layer ITO(Indium Thin Oxide) module with diamond pattern and single layer ITO module for cost-effective which are applied to mobile phone or smart remote controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.630-640
• /
• 2009

The thesis suggests hand-held equipment to overhaul for mobile TFT LCD/OLED module of high-performance. The established module equipment to overhaul could distinguish outputting video data to module for distinguishing flicker, but it is impossible with low system. In this thesis, supporting system could check the various supplement functions from bringing equipment to overhaul without changing design of FPGA or H/W the module various size for equipment to overhaul for module of high-performance coincidently. The system includes hand-held equipment to overhaul, test software embedded and software a base personal computer and have designed to output, save, and certify all contents of module test of hand-held equipment to overhaul to interface universal serial bus. Setting up 9 items that represent for efficient verification of the proposed system have been possible confirmation with TFT LCD/OLED module of high-performance, establishment scan time, creation gamma, changing register, supporting interface, and multi inch modules.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.231-254
• /
• 1994

Fracture of cusp, on posterior teeth, especially those carious or restored, is major cause of tooth loss. Inappropriate treatments, such as unnecessarily wide cavity preparations, increase the potential of further trauma and possible fracture of the remaining tooth structures. Fracture potential may be directly related to the stresses exerted upon the tooth during masticatory function. The purpose of this study is to evaluate the fracture resistance of tooth, restored with composite resin inlay. In this study, MOD inlay cavity prepared on maxillary first premolar and restored with composite resin inlay. Three dimensional finite element models with eight nodes isoparametric solid element, developed by serial grinding-photographing technique. These models have various occlusal isthmus and depth of cavity, 1/2, 1/3 and 1/4 of isthmus width and 0.7, 0.85 and 1.0 of depth of cavity. The magnitude of load was 474 N and 172 N as presented to maximal biting force and normal chewing force. These loads applied onto ridges of buccal and lingual cusp. These models analyzed with three dimensional finite element method. The results of this study were as follows : 1. There is no difference of displacement between width of occlusal isthmus and depth of cavity. 2. The stress concentrated at bucco-mesial comer, bucco-disal comer, pulpal line angle and the interface area between internal slopes of cusp and resin inlay. 3. The vector of stress direct to buccal and lingual side from center of cavity, to tooth surface going on to enamel. The magnitude of vector increase from occlusal surface to cervix. 4. The crack of tooth start interface area, between internal slop of buccal cusp and resin inlay. It progresses through buccopulpal line angle to cervix at buccomesial and buccodistal comer. 5. The influence with depth of cavity to fracture of tooth was more than width of isthmus. 6. It would be favorable to make the isthmus width narrower than a third of the intercuspal distance and depth of cavity is below 1 : 0.7.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.103-110
• /
• 2012

With a theoretical focus on the emotional experiences created via the interface, and the relationship between human beings and space, this study aims to corroborate and clarify the formation and verification of emotional interactions between human beings and space using body movements. It follows the method of Coining "Movement Phrases" through the analysis of body movements in the experimental space, thereby developing them into a complete scenario to produce the story of emotional expression. This study has hereby generated the following outcomes: First, the "pocket-type" exhibition displays a higher frequency of body movements than the "general" exhibition. It has close connections with emotional vocabularies: "Curious," "interesting," "warm," and "fun." The "general" exhibition records a relatively high frequency of emotional vocabularies like "natural," "efficient," and "free." Second, it is possible to analyze the story of space using a scenario, just like drama, based upon attributes and serial relationships. The "exposition" section reveals a high degree of "curiosity" and a large number of body movements, while the "development" section indicates high degree of "surprise" plus slight body movements. The "transition" sections manifest high "interest" and many body movements, and the "climax" section shows a high frequency of "surprise" and many changes in body movements. The "conclusion" section finally invokes images together with body movements.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.60-65
• /
• 2017

This paper describes the low noise and low power IC using the opamp sharing technique for the capacitive micro-sensor sensing platform. The proposed IC reduces noise using correlated double sampling (CDS) and reduces power consumption using the opamp sharing technique. The IC is designed to be fully programmable, and can be digitally controlled by serial peripheral interface (SPI). The power consumption and the integrated input referred noise are 1.02 mW from a 3.3 V supply voltage and $0.164aF_{RMS}$ with a bandwidth of 400 Hz. The capacitive sensitivity, the input-output linearity and the figure of merits (FoM) are 2.5 mV/fF, 2.46 %FSO, and 8.4, respectively.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.336-339
• /
• 2003

A digital data logging system has been developed for the purpose of a compact offline Ocean Bottom Seismometer(OBS). The Digital Data Logger(DDL) consists of A/D system, Micom with storage memory and firmware managing data files. The A/D system acquires data of 16bit/4ch with sampling rate of 250Hz per channel. The Micom, a micro controller board with T33521 processor of 8051 class, was equipped with 8 flash memories of 128MB for data storage capacity of 1GB. The firmware stores the acquiring data in form of binary files. The DDL was designated to be compact and light and to consume low energy as possible. The DDL is to interface with PC through USB(Universal Serial Bus). The performance of the DDL has been validated through tests with respect to a 3-axis seismometer.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.258-259
• /
• 2016

일반적으로 UHD 방송 편집 시스템에서 UHD 영상의 데이터양이 막대하기 때문에 실시간 전송을 위해 코덱과 함께 압축하여 편집 서버로 혹은 편집 서버로부터 스트림 형태로 전송한다. BT.1120 형태로 전송 송출된 SDI (Serial Digital Interface) 내장 음향 데이터는 영상과 달리 보조 데이터 영역에 다른 메타 데이터들과 함께 합성되어 전송 송출되기 때문에 추출 및 합성이 상대적으로 어렵다. 특히 재생을 위해서는 영상 코덱으로부터의 출력 영상과의 동기를 고려해야 하고 음향 데이터를 BT.1120 표준에 맞춰 보조 데이터 영역에 합성해야하기 때문에 개발에 어려움이 있다. 이에 본 논문은 UHD 영상/음향 데이터의 실시간 획득/재생 시스템에서의 SDI 내장 음향 데이터의 추출 및 합성을 위한 FPGA (Field Programmable Gate Array) 기반 하드웨어 플랫폼을 제안하였다. 또한, 이를 위한 음향 데이터 추출 로직과 합성 로직을 HDL(Hardware Design Language) 설계하여 FPGA 내에 탑재하고 카메라/디스플레이/편집 서버와 통합하였다. 시험 결과 4K 60fps 데이터에서 정상적으로 영상과 음향을 분리/획득 및 합성/재생하였다.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.103-106
• /
• 2003

In this paper, we present a hybrid inertial and vision-based tracking system for VR applications. One of the most important aspects of VR (Virtual Reality) is providing a correspondence between the physical and virtual world. As a result, accurate and real-time tracking of an object's position and orientation is a prerequisite for many applications in the Virtual Environments. Pure vision-based tracking has low jitter and high accuracy but cannot guarantee real-time pose recovery under all circumstances. Pure inertial tracking has high update rates and full 6DOF recovery but lacks long-term stability due to sensor noise. In order to overcome the individual drawbacks and to build better tracking system, we introduce the fusion of vision-based and inertial tracking. Sensor fusion makes the proposal tracking system robust, fast, accurate, and low jitter and noise. Hybrid tracking is implemented with Kalman Filter that operates in a predictor-corrector manner. Combining bluetooth serial communication module gives the system a full mobility and makes the system affordable, lightweight energy-efficient. and practical. Full 6DOF recovery and the full mobility of proposal system enable the user to interact with mobile device like PDA and provide the user with natural interface.