• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.333-338
• /
• 2014

Zigbee is a wireless communication technology optimized for WSN (Wireless Sensor Network) environment. A WSN gateway is used for node control and data transmission. However, a fixed-type gateway can restrict the flexibility of the WSN environment. A smartphone-mounted high-performance processor and Android OS can be easily used in a mobile WSN gateway. In this paper, we proposed a mobile WSN gateway based on Android smartphones. In the proposed system, a Zigbee sensor module is connected with a smartphone via USB (Universal Serial Bus) port. We also implemented an Android application for the mobile WSN gateway.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.657-659
• /
• 2004

CAN is a serial communication bus for real-time controls and automations in distributed control systems. In distributed control systems, occasionally a sensor module and a controller are not in the same node and physically separated. In order for the signal from a sensor node to reach the controller node, the signal must travel through network. CAN has a certain capabilities to deal with real-time data. However, when many nodes on the networks try to send data on the same network, the arbitration mechanism to solve the data collision problem is necessary. This situation causes the time delay which has detrimental effects on the performance of the control systems. This paper proposes a method to solve the problem due to the time delay in distributed control system using CAN. Time delay is approximated to an element with a rational transfer function using Pade approximation and Mu~synthesis method is applied. Since time delay in the network is not constant, the time delay element is considered to be an uncertainty block with a bound. The proposed method is applied to the experimental system with CAN and proved to be effective.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.328-336
• /
• 2003

Bluetooth is a specification for short-range wireless communication using the 2.4 GHz ISM band. It emphasizes low complexity, low power, and low cost. This paper describes an area-efficient digital baseband module for wireless technology. For area-efficiency, we carefully consider hardware and software partitioning. We implement complex control tasks of the Bluetooth baseband layer protocols in software running on an embedded microcontroller. Hardware-efficient functions, such as low-level bitstream link control; host controller interfaces (HCIs), such as universal asynchronous receiver transmitter (UART) and universal serial bus (USB)interfaces; and audio Codec are performed by dedicated hardware blocks. Furthermore, we eliminate FIFOs for data buffering between hardware functional units. The design is done using fully synthesizable Verilog HDL to enhance the portability between process technologies so that our module can be easily integrated as an intellectual property core no system-on-a-chip (SoC) ASICs. A field programmable gate array (FPGA) prototype of this module was tested for functional verification and realtime operation of file and bitstream transfers between PCs. The module was fabricated in a $0.25-{\mu}m$ CMOS technology, the core size of which was only 2.79 $mm{\times}2.80mm$.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.760-772
• /
• 1999

The CAN is a serial communication protocol for distributed real-time control and automation systems. Data generated from field devices in the distributed control of power plant are classified into three categories: real-time event data, real-time control data, non-real-time data. These data share a CAN medium. If the traffic of the CAN protocol is not efficiently controlled, performance requirements of the power plant system could not be satisfied. This paper proposes a bandwidth allocation algorithm that can be applicable to the CAN protocol. The bandwidth allocation algorithm not only satisfies the performance requirements of the real-time systems in the power plant but also fully utilizes the bandwidth of CAN. The bandwidth allocation algorithm introduced in this paper is validated using the integrated discrete-event/continuous-time simulation model which comprises the CAN network and distributed control system of power plant.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.941-946
• /
• 2006

It followed in system development and SMRT(Seoul Metropolitan Rapid Transit Co)System reached to an automatic train operation(ATO) and driverless operation(DLM) from the manual operation due to the train driver. The train like the general bus or the car vehicle was not serial riding in a car and the Parallel concept which the numerous passenger rides in a car simultaneously occur frequently the charge of the train driver unmanned bitterly from existing manual handling was a possibility of doing, train open door control(ODM) which bites also ATO, it handles it minimized. Like this ATO/DLM, the control system which bites being a Wayside to Train communication for immediacy, it is a system of the Vital concept the immediacy of the citizen Data evil the radio information transmission and the train of the interface which is accurate from unmanned operation and, will decipher, will accomplish it will guarantee. It respects the passenger accident prevention and an air question environment improvement from subway platform and phul leys the screen door of Platform(PSD) with the fire tube frost it refers and part it treats and to sleep it does, ODM which bites is accuracy and immediacy of altitude and when seeing from the viewpoint which demands the trust of altitude, ODM system the trust of car incest interface in the equipment construction which is safe and the comparative analysis back of the system analysis against the control which bites and case study and other subway system it leads from the research which it sees and signal - train in base grudge to sleep it contributes it does.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2013

Wearable computer systems use the wireless universal serial bus (WUSB), which refers to USB technology that is merged with WiMedia physical layer and medium access control layer (PHY/MAC) technical specifications. WUSB can be applied to wireless personal area network (WPAN) applications as well as wired USB applications such as PAN. WUSB specifications have defined high-speed connections between a WUSB host and WUSB devices for compatibility with USB 2.0 specifications. In this paper, we focus on an integrated system with a WUSB over an IEEE 802.15.6 wireless body area network (WBAN) for wireless wearable computer systems. Due to the portable and wearable nature of wearable computer systems, the WUSB over IEEE 802.15.6 hierarchical medium access control (MAC) protocol has to support power saving operations and integrate WUSB transactions with WBAN traffic efficiently. In this paper, we propose a low-power hibernation technique (LHT) for WUSB over IEEE 802.15.6 hierarchical MAC to improve its energy efficiency. Simulation results show that the LHT also integrates WUSB transactions and WBAN traffic efficiently while it achieves high energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.585-594
• /
• 2017

Wireless Docking system can provide enhanced convenience to user experience of handheld device such as smart phone by using previously deployed peripheral devises such as monitor and keyboard. In this environment, user can easily use the handheld device with variable peripheral devices at any docking system place. This system would be composed of peripherals except host computing device contrarily to previous desktop and laptop environment. For this system, Wi-Fi Alliance has been developing standard technology based on Wi-Fi Direct(Wi-Fi Peer-to-Peer Technical Specifications v1.2, 2010) technology. However, this system can make a problem which may lead to complex connectivity on handheld device due to non-compatible communication interface. To address given problem, we designed a new method of Bluetooth tunneling technology via previous Wi-Fi Direct communication, and evaluated it with experiment results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.371-374
• /
• 2004

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Preventive maintenance of induction motors has been a topic great interest to industry because of their wide range application of industry. Since the use of mechanical sensors, such as vibration probes, strain gauges, and accelerometers is often impractical, the motor current signature analysis (MACA) techniques have gained murk popularity as diagnostic tool. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is independent of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module is checking stator current, voltage, temperatures, vibration and speed of the motor. The DSPs share information from each sensor or DSP through DPRAM with hardware implemented semaphore. And it communicates the motor status through field bus (CAN, RS485). From the designed system, we get primitive sensors data for the case of normal condition and two abnormal conditions of 3 phase induction motor control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using CAN protocol.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.42-47
• /
• 2002

Measuring magnetic fields with a SQUID sensor always requires preliminary adjustments such as optimum bas current determination and flux-locking point search. A conventional magnetoencephalography (MEG) system consists of several dozens of sensors and we should condition each sensor one by one for an experiment. This timeconsuming job is not only cumbersome but also impractical for the common use in hospital. We had developed a serial port communication protocol between SQUID sensor controllers and a personal computer in order to control the sensors. However, theserial-bus-based control is too slow for adjusting all the sensors with a sufficient accuracy in a reasonable time. In this work, we introduce programmatic control sequence that saves the number of the control pulse arrays. The sequence separates into two stages. The first stage is a function for searching flux-locking points of the sensors and the other stage is for determining the optimum bias current that operates a sensor in a minimum noise level Generally, the optimum bias current for a SQUID sensor depends on the manufactured structure, so that it will not easily change about. Therefore, we can reduce the time for the optimum bias current determination by using the saved values that have been measured once by the second stage sequence. Applying the first stage sequence to a practical use, it has taken about 2-3 minutes to perform the flux-locking for our 37-channel SQUID magnetometer system.