• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1299-1305
• /
• 2002

Tx/Rx dual microstrip array antennas for satellite communications are designed, fabricated, and measured in this paper. They have a Right Handed Circular Polarization (RHCP) for Tx and Left Handed Circular Polarization (LHCP) for Rx. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 2${\times}$1 sequential rotation mays are applied. From the measured results, 8${\times}$1 microstrip may antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to satellite communication antennas, active phased may antennas, and radiators in other antennas.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.97-104
• /
• 2005

Previous studies of kinematic analysis of golf swing usually dealt with variations vertically. The purpose of the study was to examine the horizontal hip joints motion of the fifteen male professional golfers during driver swinging. Kinematic variables were calculated by the Kwon3D motion analysis program. Paired t-tests and one-way ANOVA were used to compare the hip height, distance, displacement, and position differences. Results showed that there were no hip height changes and no hip height differences between left and right hip from address to impact. The axis of the backswing was braced right hip, the axis of the downswing was moving left hip. Hips position at the top of the backswing showed that hips move to target prior to hands, which means the sequential motion of the chain linked body segments. From address to impact, left hip moving distance was longer than right hip(p<.001), but during the whole swing, right hip moving distance was longer than left hip(p<.001). Hip rotation angle to target line was $-48.14{\pm}9.32^{\circ}$ at top of the backswing, $40.88{\pm}8.44^{\circ}$ at impact, and $104.70{\pm}8.14^{\circ}$ at finish.

• Journal of Pharmacopuncture
• /
• v.3 no.2
• /
• pp.213-232
• /
• 2000

Hemiplegic shoulder pain(HSP) is one of the most frequent and difficult problems affecting poststroke hemiplegic patients. Honeybee venom acupuncture therapy(BVAT) is known for its pain relieving effects in arthralgia. To evaluate the effectiveness of BVAT on HSP, 24 patients were sequential1y allocated into BVA T treatment group and control group and monitored for 4 weeks at time interval of initial(T0), 1 week(T1), 2 weeks(T2) and 4 weeks(T4). In treatment group, 1:10000 honeybee venom solution 0.2㎖ was injected into acupoint(s) following Deqi three times a week. Kyonu(LI15) was used in the first week. Thereafter Kyonu(LI15) and Nosu(SI10) were used. Visual analogue scale of pain severity showed significant decrease in treatment group compared to control group at T2 and T4 evaluation. Painless passive range of motion of shoulder external rotation showed significant increase in treatment group compared to control group at T4 evaluation. Fugl-Meyer Motor Assessment of upper limb motor function and Modified Ashworth scale of the spasticity of upper limb showed no difference between two groups. BVAT showed as an effective therapy in HSP and further extensive clinical studies are expected.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.776-781
• /
• 2004

We report the performance of a four-element, 11.67 GHz, $high-{T}_c$ superconducting (HTS) microstrip antenna array with corporate feed network. The HTS antenna array used in this work had a circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from ${YBa}_2{Cu}_3{O}_7-x(YBCO)$ superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at cryogenic temperature and room temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.782-788
• /
• 2018

This paper proposes a novel method for the omnidirectional camera-based image rendering synchronization system using head mounted display. There are two main processes in the proposed system. The first one is rendering 360-degree images which are remotely photographed to head mounted display. This method is based on transmission control protocol/internet protocol(TCP/IP), and the sequential images are rapidly captured and transmitted to the server using TCP/IP protocol with the byte array data format. Then, the server collects the byte array data, and make them into images. Finally, the observer can see them while wearing head mounted display. The second process is displaying the specific region by detecting the user's head rotation. After extracting the user's head Euler angles from head mounted display's inertial measurement units sensor, the proposed system display the region based on these angles. In the experimental results, rendering the original image at the same resolution in a given network environment causes loss of frame rate, and rendering at the same frame rate results in loss of resolution. Therefore, it is necessary to select optimal parameters considering environmental requirements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.393-400
• /
• 2002

In this paper, a novel series feeding cross-aperture coupled microstrip antenna with the effect of hybrid feeding is proposed and demonstrated experimentally to improve narrow axial ratio bandwidth of cross-aperture coupled antenna with single feeding among the various methods for generating circular polarization. The validity of a proposed series feeding cross-aperture coupled microstrip antenna is shown by comparing experimental results between the reported and the proposed microstrip antenna, and 2${\times}$2 array microstrip antenna based on the proposed single microstrip antenna used sequential rotation technique to accomplish broader axial ratio bandwidth. In the proposed single and 2${\times}$2 array microstrip antenna, the measured axial ratio bandwidths are 110 ㎒(4.6%) and 420 ㎒(17.5%), maximum gains are 8.2 ㏈i and 12.5 ㏈i, 3 dB gain bandwidths are above 400 ㎒(16.7%), and impedance bandwidths for the VSWR<1.5 are 240 ㎒(10%) and 500 ㎒(20.8%), respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.297-302
• /
• 2007

Vibrating test of vehicle component can be possible in lab-based simulators instead of field testing owing to the development of technology in control algorithm as well as computational process. Currently, Multi-Axial Simulation Table(MAST) is recommended as a vibrating equipment, which excites a target component for 3-directional translation and rotation motion simultaneously and hence, vibrational condition can be fully approximated to that of real road test. But, the vibration-free performance of target component is not guaranteed with MAST system, which is only simulator subjective to the operator. Rather, the reliability of multi-axial vibration test is dependent on the quality of input profile which should cover the required severity of vibrating condition on target component. In this paper, multi-axial vibration testing methodology of vehicle component is presented here, from data acquisition of vehicle accelerations to the obtaining the input profile of MAST using severe data at proving ground. To compare the severity of vibration condition, between real road test and proving ground one, energy principle of equivalent damage is proposed to calculate energy matrices of acceleration data and then, it is determined the optimal combination of special events on proving ground which is equivalent to real road test at the aspects of vibration fatigue using sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.748-754
• /
• 2015

This paper proposes a sequential state estimation model consisting of continuous and discrete variables, as a way of generalizing all discrete-state factorial HMM, and gives a design of gait motion model based on the idea. The discrete state variable implements a Markov chain that models the gait dynamics, and for each state of the Markov chain, we created a Gaussian process over the space of the continuous variable. The Markov chain controls the switching among Gaussian processes, each of which models the rotation or various views of a gait state. Then a particle filter-based algorithm is presented to give an approximate filtering solution. Given an input vector sequence presented over time, this finds a trajectory that follows a Gaussian process and occasionally switches to another dynamically. Experimental results show that the proposed model can provide a very intuitive interpretation of video-based gait into a sequence of poses and a sequence of posture states.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.2
• /
• pp.1-11
• /
• 2002

The purpose of this study is to investigate landscape image and define elements of difference in visual preference of bridges on the Han River. To do this end, video was used as a media for the evaluation of the landscape image of 16 bridges on the Han River using a Semantic Differential scale. Data is collected by 50 students from Woosuk University, majoring landscape architecture. Final analysis utilized a total of 704 samples of data. Data is analyzed through descriptive statistics, and spatial image is analyzed by factor analysis algorithm Principle component analysis using Varimax method is applied far extraction and factor rotation. T-test is used to find the difference between the bridge type of preference with the data of factor score. Logistic regression is used to select the factors that influences the visual preference among the image factors. The results of this study can be summarized as follows; The image of whole bridges on the Han River is somewhat orderly, sequential and open. The degree of visual preference of unique bridge type is higher than normal but there are some differences in visual preference within the same type of structure. This suggests that the surrounding landscape is one of the important factor for visual preference. Factors covering the image of bridge are found to be 'aesthetic',　'structure','spatial factor', and 'shape'. Total variance is obtained as 60.4%. The aesthetic variables are the most important factor for visual preference and the structural factor presents no significant difference in visual preference between more preferred and less preferred bridges. Since the collapse of Songsu Bridge, we thought the structural factor is very important but the results of this study suggest that it is more important to consider the aesthetic and spatial factors of the bridge to increase the visual preference when planning and designing bridges. Simulations with more detailed data about surroundings should be utilized practical design.

• Journal of Labour Economics
• /
• v.26 no.3
• /
• pp.49-75
• /
• 2003

This paper empirically examines multiskill formation as a critical mechanism of human capital accumulation within the firm. We investigate various factors that foster multiskill formation of the employees at the workplace. We also investigate whether and how multiskill formation of the employees, in tum, affect the labor productivity. Our empirical results are summarized as the following. First, skills of the employees are developed along the sequential path rather than the parallel path. They evolve from the simple-skill to the single-skill, and then to the multi-skill state. Second, multi skilling is stimulated by uncertainty factors of the environment and various human resource management practices such as mutual learning among workers, workers' participation in decision making, and job rotation. Third, the increase in the ratio of multiskilled workers in the firm has a positive impact on the growth of the firm's labor productivity. Our analyses show that the labor productivity growth increases by 0.019 with the increase in multi skilling ratio by 0.1. Fourth, uncertainty and human resource management practices had an indirect impact on labor productivity growth only through multiskilling. These results strongly indicate that multiskilling is a result of human capital accumulation fostered by various human resource management practices.