• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.739-747
• /
• 2011

Objective: The present study evaluated information presentation methods applicable to a wearable Braille display in terms of performance and satisfaction measures. Background: A Braille display wearable at a finger can improve accessibility of information for the blind by presenting information in real time. Method: A Braille display with six pins operated by DC servomotors was developed to simulate four information presentation methods(active, stationary, simultaneous, and sequential methods). An evaluation experiment was conducted with 16 participants(8 normal and 8 blind participants) by using three objective measures(reaction time, RT, unit: sec; recognition time, CT, unit: sec; correct response percentage, CP) and two subjective measures(overall satisfaction, OS; perception easiness, PE) with a 7-point scale. Results: The average RTs and CTs of the active and stationary methods were significantly shorter than those of the simultaneous and sequential methods for the blind participants. Also, the average CPs, OSs, and PEs of the active and sequential methods were significantly higher than those of the stationary and simultaneous methods. Conclusion: The active and sequential methods were preferred to the other methods for the blind. Application: The performance characteristics identified in the present study for the four braille display methods can be utilized to develop an effective wearable Braille display system.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2351-2356
• /
• 2010

Various dienamide derivatives were synthesized in reasonable yields from benzonitriles having an amide moiety at the ortho-position, via the sequential (i) In-mediated allylation of nitrile moiety to form an imine intermediate, (ii) intramolecular quenching of an acyl group by the imine intermediate, and (iii) a proton transfer to dienamide.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.929-934
• /
• 1999

2-( β-Alkoxyvinyl)-4-(1-hydroxyalkyl)pyrroles (14) were synthesized from 4-acylpyrrole-2-carboxylates (8) by sequential reduction of their acyl and alkoxycarbonyl groups to give 4-(1-hydroxyalkyl)pyrrole-2-carbalde-hydes (13) followed by Wittig reaction of the aldehydes with the ylide of alkoxymethylphosphonium chloride. Diels-Alder reaction of 2-(β-alkoxyvinyl)-4-(1-hydroxyalkyl)pyrroles with trans-methyl β-nitroacrylate gave 6-alkoxy-3-(1-hydroxyalkyl)-5-nitro-4,5,6,7-tetrahydroindole-4-carboxylates (3).

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.10a
• /
• pp.164-165
• /
• 1995

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.369-374
• /
• 2006

$Rh-Pt/Al_{2}O_{3}$ catalysts were used for the first time to study its reaction characteristics in the asymmetric hydrogenation of ethyl pyruvate. The catalysts were prepared either by impregnation of Rh on a commercial $Pt/Al_{2}O_{3}$ or by sequential impregnation of Rh followed by impregnation of Pt on $Al_{2}O_{3}$. Reaction rate and enantiomeric excess (ee%) were compared according to the preparation method, Rh contents, and the reduction temperature of the catalyst. The physical characteristics of the catalysts were analyzed using XRD and TEM. Bimetallic $Rh-Pt/Al_{2}O_{3}$ catalysts showed an improved reaction rate and optical purity (63.6 ee%) with increasing the reduction temperature. The variation of the Rh contents as well as the preparation method elicited a big difference on the reaction rate, while enantiomeric excess (ee%) was lower (56~60%) with all bimetallic catalysts than with monometallic $Pt/Al_{2}O_{3}$ catalyst.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2006

In this paper, an optimum design technology is developed to find an optimal position of the shock absorber using ADAMS and VisualDOC. A vehicle with a torsion-beam rear suspension is modeled by using ADAMS. Design variables for the optimal positioning of the shock absorber are defined considering the hard points of the chassis structure and design positioning are specified through the sensitivity analysis using a bump-crossing simulation. The objective function is defined as the joint reaction forces of the shock absorber connecting joints of the chassis structure. Sequential Quadratic Programming and Genetic Algorithms are used for this study. To validate the optimized design variables, pothole simulations are performed. GA showed better results than SQP algorithms for this design purpose.

• The Journal of Korean Physical Therapy
• /
• v.23 no.3
• /
• pp.65-70
• /
• 2011

Purpose: We investigated the changes in the stop-signal reaction time (SSRT) and the no-signal reaction time (NSRT) following motor sequential learning in the stop-signal task (SST). This study also determined which of the reduction0s of spatial processing time was better between blocked- and random-SST. Methods: Thirty right-handed healthy subjects without a history of neurological dysfunction were recruited. In all subjects, both the SSRT and the NSRT were measured for the SST. Tasks were classified into two categories based on the stop-signal patterns, the blocked-SST practice group and random-SST practice group. All subjects gave written informed consent. Results: In the blocked-SST group, both the SSRT and the NSRT was significantly decreased (p<0.05) but not significantly changed in the random-SST group. In the SSRT and the NSRT, the blocked-SST group was faster than the random-SST group (p<0.05). In the post-test SST after practice of each group, the SSRT was significantly decreased in the random-SST group (p<0.05), but the NSRT showed no significant changes in either group. Conclusion: These findings demonstrate that random-SST practice resulted in a decrease in internal processing times needed for a rapid stop to visual signals, indicating motor skill learning is acquired through improved response selection and inhibition.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.231-237
• /
• 2008

Biodegradable poly($\varepsilon$-caprolactone-co-L-lactide)-b-poly(ethylene glycol) (PCLA-b-PEG) copolymers were synthesized via solution polymerization by varying the feed composition of $\varepsilon$-caprolactone ($\varepsilon$-CL) and L-lactide (LLA) ($\varepsilon$-CL: LLA= 10:0, 7:3, 5:5, 3:7, 0: 10). The feed ratio based on weight is in accordance with the copolymer composition except for the case of $\varepsilon$-CL: LLA=3:7 (C3L7), which was verified by $^1H$-NMR. Two different approaches were used for the exceptional case, which is an extension of the reaction time or the sequential introduction of the monomer. A copolymer composition of $\varepsilon$-CL: LLA=3:7 could be obtained in either case. The chemical microstructure of PCLA-b-PEG was determined using the $^{13}C$-NMR spectra and the effect of the sequential structure on the thermal properties and crystallinity were examined. Despite the same composition ratio of the copolymer, the microstructure can differ according to the reaction conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.185-191
• /
• 2017

Cadmium compounds with one dimension (1D) nanostructures have attracted attention for their excellent electrical and optical properties. In this study, vertically aligned CdTe-Si nanostructures with high density were synthesized by several simple chemical reactions. First, l D Te nanostructures were synthesized by silver assisted chemical Si wafer etching followed by a galvanic displacement reaction of the etched Si nanowires. Nanowire length was controlled from 1 to $25{\mu}m$ by adjusting etching time. The Si nanowire galvanic displacement reaction in $HTeO_2{^+}$ electrolyte created hybrid 1D Te-branched Si nanostructures. The sequential topochemical reaction resulted in $Ag_2Te-Si$ nanostructures, and the cation exchange reaction with the hybrid 1D Te-branched Si nanostructures resulted in CdTe-Si nanostructures. Wet chemical processes including metal assisted etching, galvanic displacement, topochemical and cation exchange reactions are proposed as simple routes to fabricate large scale, vertically aligned CdTe-Si hybrid nanostructures with high density.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.68-77
• /
• 2009

For the reservoir sediment highly contaminated with total Cr, Pb, and Cd, the applicability of electrokinetic remediation method was evaluated. Also, BCR sequential extraction method was adopted to compare the heavy metal speciation in between before and after electrokinetic reaction that is operated under constant current condition for the sediment. After reaction, total Cr and Pb moved toward the direction of anode, while Cd tended to cathode and stayed highest in the midst of sediment specimen. From the BCR sequential extraction analysis, it was known that for total Cr and Pb the residual fraction that showed high fraction before reaction decreased and changed to the oxidation fraction. On the other hand, for Cd the fraction of exchangeable/carbonate that dominated most fractions before reaction changed to the residual and oxidation fractions.