• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.534-540
• /
• 2003

This study was conducted to investigate the effect of supplementation of galacto-oligosaccharides (GOS) on methane emission, nutrient digestibility, energy utilization and blood metabolites by Holstein cows fed silages. In two sequential digestion and respiratory trials, two non-lactating Holstein cows were arranged to a balanced incomplete block design. Experimental diets consisted of two silage types; orchardgrass (Dactylis glomerata L.) based silage (OS), mixed silage (orchardgrass based silage and alfalfa (Medicago sativa L.) silage) (MS), while two GOS levels were without supplementation (0) and 2% of dry matter intake supplementation (2). Four combination diets were OS-0, OS-2, MS-0 and MS-2. Significant effects of silage types and GOS supplementation levels were not observed for DM and OM intake. Whereas the digestibility of OM, NDF and ADF was significantly (p<0.05) higher in cows fed OS with and without GOS compared cows fed MS diets. As percentage of GE intake, fecal energy loss for OS diets was significantly (p<0.05) declined than for MS diets. In contrast, cows fed MS diets had lower (p<0.05) urine energy loss as a proportion of GE intake compared to OS diets. Energy loss as CH4 and heat production was numerically increased when cows fed both OS and MS with GOS supplementation. Compared to OS, CH4 emission in cows fed MS was numerically decreased by 10.8 %. Methane conversion ratio (energy loss as CH4 per unit of GE intake) for OS-0, OS-2, MS-0 and MS-2 were 7.1, 7.2, 6.8 and 7.0, respectively. Plasma of glucose and urea-N concentration were significantly (p<0.05) elevated from 1 h to 6 h after feeding, otherwise total protein in plasma was declined (p<0.01) at 6 after feeding.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.81-90
• /
• 2004

The state assignment for a finite state machine greatly affects the delay, area, power dissipation, and testabilities of the sequential circuits. In order to improve the testabilities and power consumption, a new state assignment technique . based on m-block partition is introduced in this paper. By the m-block partition algorithm, the dependencies among groups of state variables are minimized and switching activity is further reduced by assigning the codes of the states in the same group considering the state transition probability among the states. In the sequel the length and number of feedback cycles are reduced with minimal switching activity on state variables. It is inherently contradictory problem to optimize the testability and power consumption simultaneously, however our new state assignment technique is able to achieve high fault coverage with less number of scan nfp flops by reducing the number of feedback cycles while the power consumption is kept low upon the low switching activities among state variables. Experiment shows drastic improvement in testabilities and power dissipation for benchmark circuits.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.217-223
• /
• 2012

This paper presents design and operational characteristics of 150 MW pulse power system for high current pulse forming network to control trigger time. The system is composed of two capacitor bank modules. Each capacitor bank module consist of a trigger vacuum switch, 9k 33kJ capacitor, an energy dump circuit, a crowbar circuit and a pulse shaping inductor and is connected in parallel. It is controlled by trigger controller to select operational module and determine triggering time. Pspice simulation was conducted about determining parameters of components such as crowbar circuit, capacitor, pulse forming inductor, trigger vacuum switch and predicting results of experiment circuit. The result of the experiment was in good agreement with the result of the simulation. The various current shapes with 300~650 us pulse width is formed by sequential firing time control of capacitor bank module. The maximum current is about 40 kA during simultaneous triggering of two capacitor bank modules. The developed 150 MW pulse power system can be applied to high current pulse power system such as rock fragmentation power sources, Rail gun, Coil gun, nano-powers, high power microwave.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2004

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. Here was carried out an experiment to observe the heat transfer in the cable penetration fire stop system made of DOW CORNING products. The dynamic heat transfer occurring in the fire stop system is formulated in a parabolic partial differential equation subjected to a set of initial and boundary conditions. And it was modeled, simulated, and analyzed. The simulation results were illustrated in three-dimensional graphics and were compared with experimental data. Through the simulations, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable streams. It also was found that the dynamic heat transfer through the cable streams was one of the most dominant factors, and the feature of heat conduction could be understood as an unsteady-state process. It is certain that these numerical results are useful for making a performance-based design for the cable penetration fire stop system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.103-112
• /
• 1994

This study was a sequential experiment consisting if feeding trial and in vitro culture studies. Feeding was conducted by $2{\times}2{\times}2$ factorial design with two cimaterol levels (0, 0.25 mg/kg), two energy levels (3,200, 2,900 ME kcal/kg) and two sexes. In starting period (0-21 days) broilers were fed diets containing two energy level without dietary supplementation of cimaterol. During finishing period (21-42 days) cimaterol groups were fed cimaterol supplemented diets. In vitro cultures were carried out to study the cellular metabolism of protein and fat in liver and adipose tissues prepared from chicks used in feeding trials. Body weight gain was significantly improved by the administration of cimaterol to experimental diets by 2.4% (p < 0.05). Feed intake was reduced by cimaterol administration at the high energy level, but this trend was reversed at low energy level. Feed efficiency was improved by cimaterol administration and at high energy level the difference (5.7%) was significant(p < 0.05). The administration of cimaterol had no effects on percentage of abdominal fat content, giblet and neck. There was little difference in carcass yield between control and cimaterol treated group. The administration of cimaterol had no effects on nutrient metabolizability or carcass composition. The results of in vitro studies with liver tissues showed that cimaterol increased the lipolytic activities (p < 0.05) and decreased lipogenic activities (p < 0.05). In in vitro studies with acinar cell of liver tissues. cimaterol increased the amount of retained protein and decreased secreted protein at high energy level. but the trend was opposite at low energy level.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.735-744
• /
• 2012

In order to quantify the flow distribution characteristics of APR+ reactor, a test was performed on a test facility, ACOP ($\underline{A}$PR+ $\underline{C}$ore Flow & $\underline{P}$ressure Test Facility), having a length scale of 1/5 referring to the prototype plant. The major parameters are core inlet flow and outlet pressure distribution and sectional pressure drops along the major flow path inside reactor vessel. To preserve the flow characteristics of prototype plant, the test facility was designed based on a preservation of major flow path geometry. An Euler number is considered as primary dimensionless parameter, which is conserved with a 1/40.9 of Reynolds number scaling ratio. ACOP simplifies each fuel assembly into a hydraulic simulator having the same axial flow resistance and lateral cross flow characteristics. In order to supply boundary condition to estimate thermal margins of the reactor, the distribution of inlet core flow and core exit pressure were measured in each of 257 fuel assembly simulators. In total, 584 points of static pressure and differential pressures were measured with a limited number of differential pressure transmitters by developing a sequential operation system of valves. In the current study, reactor flow characteristics under the balanced four-cold leg flow conditions at each of the cold legs were quantified, which is a part of the test matrix composing the APR+ flow distribution test program. The final identification of the reactor flow distribution was obtained by ensemble averaging 15 independent test data. The details of the design of the test facility, experiment, and data analysis are included in the current paper.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.1-8
• /
• 2022

In this paper, we design and implement a GPU-based parallel algorithm to effectively solve the traveling salesman problem through an ant color system. The repetition process of generating hundreds or thousands of tours simultaneously in TSP utilizes GPU's task-level parallelism, and the update process of pheromone trails data actively exploits data parallelism by 32x32 thread blocks. In particular, through simultaneous memory access of multiple threads, the coalesced accesses on continuous memory addresses and concurrent accesses on shared memory are supported. This experiment used 127 to 1002 city data provided by TSPLIB, and compared the performance of sequential and parallel algorithms by using Intel Core i9-9900K CPU and Nvidia Titan RTX system. Performance improvement by GPU parallelization shows speedup of about 10.13 to 11.37 times.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.268-278
• /
• 2004

In this paper, we describe our experience in the design and implementation of the SMART file system to handle multimedia workload. Our work has three design objectives: (ⅰ) efficient support for sequential workload, (ⅱ) avoiding disk fragmentation, (ⅲ) logical unit based file access. To achieve these three objectives, we develop a file system where a file consists of linked list of Data Unit Group. Instead of tree like structure of the legacy Unix file system, we use single level file structure. Our file system can also access the file based upon the logical unit which can be video frame or audio samples. Data Unit Group is a group of logical data units which is allocated continuous disk blocks. At the beginning of each Data Unit Group, there exists an index array. Each index points to the beginning of logical data units, e.g. frames in the Data Unit Group. This index array enables the random access and sequencial access of semantic data units. SMART file system is elaborately tailored to effectively support multimedia workload. We perform physical experiments and compare the performance of SMART file system with EXT2 file system and SGI XFS file system. In this experiment, SMART file system exhibits superior performance under streaming workload.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.429-440
• /
• 2008

As embedded system becomes more complex, software development becomes more important in the entire design process. Most embedded applications consist of multi -tasks, that are executed in parallel. So, dataflow model that expresses concurrency naturally is preferred than sequential programming language to develop multitask software. For the execution of multitasking codes, operating system is essential to schedule multi-tasks and to deal with the communication between tasks. But, it is needed to execute multitasking code without as when the target hardware platform cannot execute as or target platforms are candidates of design space exploration, because it is very costly to port as for all candidate platforms of DSE. For this reason, we propose the serialized multitasking code generation technique from dataflow specification. In the proposed technique, a task is specified with dataflow model, and generated as a C code. Code generation consists of two steps: First, a block in a task is generated as a separate function. Second, generated functions are scheduled by a multitasking scheduler that is also generated automatically. To make it easy to write customized scheduler manually, the data structure and information of each task are defined. With the preliminary experiment of DivX player, it is confirmed that the generated code from the proposed framework is efficiently and correctly executed on the target system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.717-722
• /
• 2016

In this paper, in order to support the peak current limiting function depending on the intensity of the fault current at the early stage of failure, a two magnetically coupled type superconducting fault current limiter (SFCL) is proposed, which includes high-Tc superconducting (HTSC) element 1, where the existing primary and secondary coils are connected to one iron core in parallel, and HTSC element 2, which is connected to the tertiary winding using an additional iron core. The results of the experiments in this study confirmed that the two magnetic coupling type SFCL having coil 1 and coil 2 connected in parallel using dual iron cores is capable of having only HTSC element 1 support the burden of the peak current when a failure occurs. The reason for this is that although HTSC element 1 was quenched and malfunctioned because the instantaneous factor of the initial fault current was large, the current flowing to coil 3 did not exceed the critical current, which would otherwise cause HTSC element 2 to be quenched and not function. In order to limit the peak current upon fault through the sequential HTSC elements, the design should allow it to have the same value as the low value of coil 1 while having coil 3 possess a higher self-inductance value than coil 2. In addition, a short-circuit simulation experiment was conducted to examine and validate the current limiting and recovery characteristics of the SFCL when the winding ratio between coil 1 and coil 2 was 0.25. Through the analysis of the short-circuit tests, the current limiting and recovery characteristics in the case of the additive polarity winding was confirmed to be superior to that of the subtractive polarity winding.