• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.358-362
• /
• 2006

Pyro-shock generally refers to the severe mechanical transients caused by the detonation of an ordnance device on a structure. Such device on a structure, including linear explosive, and point explosive are widely used to accomplish in-flight separation of structural elements on aerospace vehicle. And they are a significant cause of launch vehicle failures. The launch vehicle being developed in Korea also uses the explosive for separation events. In this paper, the isolator equipped to small satellite launch vehicle made of PTFE(Teflon) is developed to reduce the separation shock. The test to measure dynamic stiffness of PTFE isolator is performed. This test enables us to find the frequency range of PTFE isolator. And,, pyre-shock test using explosive to evaluate the performance of PTFE isolator is executed. from this study, the isolator conformed to frequency range and load requirement is developed using PTFE instead of rubber.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.346-354
• /
• 2006

This study shows that the system performance of a positioning system composed of a piezoelectric actuator-driven flexure guide depends largely on the preload applied on the flexure guide and the driving input amplitude. We used a flexure guided system that had an original resonant frequency of 54 Hz. Our experiment showed that we could increase the driving bandwidth above the original resonant frequency, for a case involving a large preload and a small input amplitude. Results show that there is a specific 'separation frequency' where the response of the moving mass of the flexure system decouples from the response of the piezoelectric actuator, and this specific separation frequency can be selected by a proper choice of the preload and the input amplitude. To find the separation frequency, sine sweep tests were performed. To confirm the increased system bandwidth frequency, open-loop sine tracking experiments were performed. Test results show that the system responds very well up to 130 Hz frequency higher than the original natural frequency (54 Hz).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.72-73
• /
• 2010

In this paper, the main noise sources and its radiated noise levels of upwind horizontal-axis wind turbines are experimentally and theoretically investigated. Theoretical predictions for indentifying the dominant source locations are made by using the empirical noise prediction model of Brooks et al. (1989) for the airfoil self noise. Through the comparison of theoretical results with the experimental results, turbulence-boundary-layer-trailing-edge (TBL-TE) noise is revealed to be the dominant source over all frequency range and separation and stall (S-S) noise is possibly important in the relative lower frequency range compared with TBL-TE noise.

• 대한전자공학회논문지SP
• /
• 제49권4호
• /
• pp.105-110
• /
• 2012

정준상관분석 (canonical correlation analysis, CCA)은 두 변수집단 사이의 선형 관계를 측정하는 확률적 분석 기법으로 이를 이용하여 다수의 신호가 혼재되어 수신된 신호로부터 각각의 신호원을 분리하는 것이 가능하다. 기존에 CCA와 자기회귀(auto regressive) 기법을 이용하여 혼재된 신호를 분리하는 기법이 제안되었으나 신호원 분리를 효과적으로 수행하기 위해서는 높은 신호 대 잡음비 (signal-to-noise ratio)가 요구되는 문제가 있다. 본 논문에서는 자기회귀 기법의 파라미터 계산시 잡음성분이 포함되어있는 자기공분산 행렬의 주대각 원소를 제거하여 잡음의 영향을 최소화하고 이를 통하여 신호원 분리 성능을 개선하는 방안을 제안한다. 제안하는 기법은 기존에 제안된 CCA와 자기회귀을 이용한 신호 분리 기법에 비하여 더 우수한 신호 분리 성능을 보일 뿐 만 아니라 신호원 분리 과정에서 요구되는 계산량을 줄일 수 있다.

• Molecules and Cells
• /
• 제45권1호
• /
• pp.6-15
• /
• 2022

Phase separation is a thermodynamic process leading to the formation of compositionally distinct phases. For the past few years, numerous works have shown that biomolecular phase separation serves as biogenesis mechanisms of diverse intracellular condensates, and aberrant phase transitions are associated with disease states such as neurodegenerative diseases and cancers. Condensates exhibit rich phase behaviors including multiphase internal structuring, noise buffering, and compositional tunability. Recent studies have begun to uncover how a network of intermolecular interactions can give rise to various biophysical features of condensates. Here, we review phase behaviors of biomolecules, particularly with regard to regular solution models of binary and ternary mixtures. We discuss how these theoretical frameworks explain many aspects of the assembly, composition, and miscibility of diverse biomolecular phases, and highlight how a model-based approach can help elucidate the detailed thermodynamic principle for multicomponent intracellular phase separation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.161-166
• /
• 2012

This Study, as part of a study on the application plan of overseas noise prediction models suitable for making domestic noise maps, analyzed the correlation between the differences in predicted noise levels by individual noise prediction model and surveyed data on General roads and Expressways. Separation distances of 5m and 10m, respectively were set from the ends of the general roads and the expressways at the points of measurements and to check the distribution patterns of sound power levels, the levels were measured at the heights of 1.5m and 3m, respectively. The latest revised versions of the five models (CRTN, RLS90, NMPB, Nord2000, ASJ2008) suggested in The Method of making Noise Maps were used as prediction models, and predicted noise levels were calculated by using commercial software SoundPLAN (Ver 7.1).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제26권3호
• /
• pp.156-184
• /
• 2022

In this article, we propose a novel variational model for restoring color images corrupted by mixed multiplicative Gamma noise and additive Gaussian noise. The model involves a data-fidelity term that characterizes the mixed noise as an infimal convolution of two noise distributions and the saturation-value total variation (SVTV) regularization. The data-fidelity term facilitates suitable separation of the multiplicative Gamma and Gaussian noise components, promoting simultaneous elimination of the mixed noise. Furthermore, the SVTV regularization enables adequate denoising of homogeneous regions, while maintaining edges and details and diminishing the color artifacts induced by noise. To solve the proposed nonconvex model, we exploit an alternating minimization approach, and then the alternating direction method of multipliers is adopted for solving subproblems. This contributes to an efficient iterative algorithm. The experimental results demonstrate the superior performance of the proposed model compared to other existing or related models, with regard to visual inspection and image quality measurements.

• 항공우주시스템공학회지
• /
• 제1권1호
• /
• pp.73-78
• /
• 2007

Self-noise from the rotor blade of the UH-1H Helicopter is obtained numerically by using the Brooks' empirical noise model. All of the five noise sources are compared with each other in frequency domain. From the calculated results the bluntness noise reveals dominant noise sources at small angel of attack, whereas the separation noise shows main noise term with gradually increasing angel of attack. From the results of two different tip Mach numbers with the change of angel of attack, the OASPLs at M = 0.8 show about 15dB larger than those at M = 0.4.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.58-63
• /
• 2015

GPS(Global Positioning System는 지구상에서 약 2km 떨어진 위성으로부터 송신한 신호를 수신하므로 그 수신감도가 매우 낮아 재밍과 간섭에 매우 취약하다. 따라서 GPS 수신단에서 항재밍 능력에 대한 필요성은 점점 증가하고 있다. 이러한 GPS의 취약성을 이용하여 전시 상황에서 적군은 재밍 기법을 이용하여 수신단에서 아군의 GPS 신호를 이용한 정확한 측위를 방해한다. 따라서 전시상황에 대비하여 재밍 환경에 대응하고, 측위 정보를 획득할 수 있는 방법이 필요하다. 본 연구에서는 재밍 환경에서의 측위 정확도를 향상시키기 위해 BSS(Blind Source Separation) 기법을 사용하여 GPS 신호와 재밍 신호를 분리하는 방법을 제안한다. 또 재밍신호와 분리된 GPS 신호에는 여전히 잡음(noise)이 존재해 정확한 측위 정보를 획득하기 어렵다. 따라서 잡음을 효과적으로 제거하기 위해 웨이블릿 임계화 기법을 사용한다. 실험 결과는 본 연구실에서 수행한 GPS/QZSS/Wi-Fi 밀결합 측위기법의 테스트 결과를 이용하여 재밍 환경에서의 BSS 와 웨이블릿 임계화 기법을 통한 정확도 향상을 보이며 제안한 시스템 모델의 우수성을 입증한다.

• 전자공학회논문지S
• /
• 제35S권4호
• /
• pp.128-138
• /
• 1998

This paper describes a principle of the conducted noise separator which can separate the conducted noise to the common mode and differential mode(normal mode), and presents the transfer characteristics of the separator designed and manufactured. We separated the conducted noise generated from switched mode converter to the CM and DM conducted noise, and also analyzed the source and path of conducted noise in the converter by the conducted noise separator. Since we could easily get the characteristics of the CM and DM conducted noise by the separator, we could efficiently determine the contermeasures for the reduction of the conducted noise and establish the foundation of the systematic procedure for the design of low pass filter.