• 자원리싸이클링
• /
• 제14권2호
• /
• pp.33-42
• /
• 2005

Nd와 Sm이 혼합된 염산용액에서 PC88A에 의한 두 금속의 분리에 대한 실험을 수행하였다. 또한 PC88A의 비누화가 두 금속의 추출 및 분리에 미치는 영향을 조사하였다. 본 연구에서 수행한 실험조건에서 Sm의 분배계수가 Nd의 분배계수보다 크며, 분리인자는 수상의 pH에 따라 증가하였다. 비누화 PC88A로 추출하는 경우 PC88A로 추출하는 경우에 비해 분배계수와 분리인자 모두 증가하였다. PC88A와 비누화 PC88A에 의한 추출시 초기추출조건으로부터 Nd와 Sm의 분배계수와 분리인자를 예측할 수 잇는 모델을 개발하였다. 본 연구에서 개발된 모델을 초기추출조건에 적용하여 예측한 Nd와 Sm의 분배계수는 실험으로 측정한 값과 서로 잘 일치하였다.

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.307-313
• /
• 2010

용매추출과 ICP-AES를 이용하여 구리와 탄소가 주성분인 탄소소재에 함유된 납 및 카드뮴을 정량하기 위한 조건을 연구하였다. 구리성분은 납 및 카드뮴 정량에 방해를 하므로 potassium cyanide로 masking한 다음 dithizone을 가하여 납 및 카드뮴을 Pb- 또는 Cd-dithizone 착물을 형성한 다음 chloroform으로 추출하여 측정하였다. 납 및 카드뮴에 대한 측정 회수율이 우수하였고, 방해를 일으키는 매질원소를 효율적으로 제거할 수 있었다. 납 및 카드뮴 화합물이 첨가된 시험기준 물질에 대한 용매추출시험에서 matrix의 영향을 받지 않고 정량하였다.

• 분석과학
• /
• 제6권1호
• /
• pp.21-27
• /
• 1993

54% 순도의 공업용 n-헥산을 HPLC급으로 분리, 정제하였다. 분별증류법으로 분리하기 어려운 methylcyclopentane, 2-methylpentane, 그리고 3-methylpentane 등은 molecular aieve 5A를 이용한 액체-고체 크로마토그래피법으로 분리하였다. HPLC 용매로서 엄격히 규제받는 UV와 형광불순물은 알루미나와 실리카겔을 이용한 흡착법으로 정제하였다. 이와 같은 방법으로 n-헥산을 정제함으로써 수분, 색도(APHA), 산도, 증발잔류물, 황 및 thiophene 등의 불순물 항목을 모두 HPLC급의 규격까지 낮출 수 있었다.

• 산업기술연구
• /
• 제19권
• /
• pp.189-195
• /
• 1999

A study on the separation Cu, Ni, and Co was carried out using LIX 84 leachate, chelate extractant. For this test, artificial test solution was prepared by varing concentrations of Cu, Ni, Co, $(NH_4)_2CO_3$ and $(NH_4)_2SO_4$. It found that pH of the solution was very important factor for the separation of nickel from copper. The results showed that nickel was effectively extracted from copper by using LIX 84 at pH 1.0 to 1.2. The volume ration or organic to aqueous phases was 1.0. According to the McCabe-Thiele diagram, the extraction rate of copper was 99 percents at the equal ratio of organic to aqueous phase in three stages.

• Environmental Analysis Health and Toxicology
• /
• 제12권3_4호
• /
• pp.75-84
• /
• 1997

Chromatographic retention behavior and separation of various phenol derivatives on a Partisil 10 ODS 3 column-with mobile phase containing $\alpha$-cyclodextrin-were systematically studied. The decrease in k' values caused by the addition of cyclodextrins in the mobile phase was based on the formation of an inclusion complex, resulting in weakening of the hydrophobic interaction between solutes and the stationary phase. The content of the organic solvent in the mobile phase also influenced k' values of the solutes, and k' values increased with a decrease of the content of organic solvent in the mobile phase. A simple equation has been derived that reveals the hyperbolic dependence of the capacity factor on the total concentration of cyclodextrin. A plot of the reciprocal of the capacity factor against (CD)$_T$ gives a straight line and the dissociation constant, K$_D$, of the inclusion complex can be calculated from the slope. The capacity factor decreased with increasing temperature. The enthalpy was calculated from the slope of van't Hoff plots. Under optimum conditions, some mixtures of phenol derivatives were able to separated successfully.

• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.43-50
• /
• 2017

Synthetic resins were combined 1-aza-12-crown-4 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 8%, and 16% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on metal ion adsorption for resin adsorbent, the metal ions showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in ethanol solvent was the order of uranium ($UO_2{^{2+}}$) > cobalt ($Co^{2+}$) > dysprosium ($Dy^{3+}$) ion, adsorbability of the metal ion was the crosslink in order of 1%, 2%, 8%, and 16% and it was increased with the lower dielectric constant. In addition, theses metal ions could be separated in the column with 1% crosslink resin by using nitric acid (pH 2.0) as an eluent.

• 청정기술
• /
• 제24권1호
• /
• pp.15-20
• /
• 2018

Hexafluoropropyleneoxide ($C_3F_6O$, HFPO) is highly expensive and it may be used as a raw material for the synthesis of various fluorine based compounds. Currently, extractive distillation method has gained considerable attention to collect the HFPO from a mixture of HFPO / hexafluoropropylene ($C_3F_6$, HFP). Optimized operating conditions are studied using a theoretical method for the extraction process. Among available solvents for the purification process, the use of 1,1-dichloro-1-fluoroethane exhibits a high purity of HFPO as a top product and minimize the required heat duty. Since the boiling point of the solvent increases as the pressure in the column increases, the enhanced extractive capability of the solvent led to the high purity of HFPO at the high pressure.

• 대한금속재료학회지
• /
• 제47권6호
• /
• pp.349-355
• /
• 2009

In the solvent extraction of Ru(IV) with Alamine336, it was found that Ru took part in the reaction as $RuCl_{6}_^{2-}$ in the HCl concentration range of 1 to 5 M. Interaction parameter between hydrogen ion and $RuCl_{6}_^{2-}$ was estimated by applying Bromley equation to the extraction data. From the mixed solutions of Pd(II) and Ru(IV), the distribution coefficients of Pd were found to be higher than those of Ru in the experimental ranges. Separation factor between Pd and Ru rapidly increased with the decrease of Alamine336 concentration. About 60% of the Ru from the mixed solutions was extracted by TBP at 8.3 M HCl, while Pd was not extracted in the HCl concentration range of 1.6 to 8.3 M.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.391-407
• /
• 2023

This article provides a survey of wet (aqueous) methods for recovery, separation, and purification of uranium from fission products in carbonate solutions during the reprocessing of spent nuclear fuel and methods for removal of radionuclides from alkaline radioactive waste. The main methods such as selective direct precipitation, ion exchange, and solvent extraction are considered. These methods were compared and evaluated for reprocessing of spent nuclear fuel in carbonate media according to novel alternative non-acidic methods and for treatment processes of alkaline radioactive waste.

• 공업화학
• /
• 제28권4호
• /
• pp.420-426
• /
• 2017

최근 특정 용매에 대한 저항성이 있고 특정 분획분자량을 가지는 고분자 분리막을 통해 용매 또는 용질의 분리가 이루어지는 용매저항성 나노여과막에 대한 연구가 많이 이루어지고 있다. 이러한 분리막의 필수조건은 우수한 물성과 용매저항성을 가지는 것인데 현존하는 상업용 고분자 중 가장 내열성이 좋다고 알려진 폴리벤즈이미다졸은 고유의 용매저항성 역시 뛰어나지만 가교되었을 때 강한 유기용매에도 녹지 않는 특성을 가진다. 따라서 본 연구에서는 이러한 폴리벤즈이미다졸의 용매저항성을 이용한 나노여과막의 적용 가능성에 대하여 논의하고자 하였다. 분리막의 제조는 비용매유도상전이법을 통해 실시하였고 전계방출형 주사전자현미경을 통해 나노여과막으로서 적절한 복합막을 형성하는 것을 확인하였다. 또한, 가교유무에 따른 용매의 투과성능을 확인하였고 장시간 운전을 통하여 용매에 대한 내구성에 따른 안정성 또한 확인하였다. 투과도 실험은 물, 에탄올, 벤젠, N, N-dimethylacetamide (DMAc), n-methyl-2-pyrrolidone (NMP) 다섯 가지 용매에 의해 실시되었으며 각각의 초기 플럭스는 $6500L/m^2h$ (Water, 2 bar), $720L/m^2h$ (DMAc, 5 bar), $185L/m^2h$ (Benzene, 5 bar), $132L/m^2h$ (NMP, 5 bar), $65L/m^2h$ (Ethanol, 5 bar)를 나타내었고 분리막의 종류에 따라 2-5 bar의 압력을 적용하였다.