• 제목/요약/키워드: Separation Kernel

검색결과 32건 처리시간 0.028초

곡물(穀物)의 공기선별(空氣選別)에 관(關)한 공기동력학적(空氣動力學的) 연구(硏究)(II) -수직풍동(垂直風銅)을 이용(利用)한 곡물(穀物)의 종말속도(終末速度) 측정(測定)- (Aerodynamic Study on Pneumatic Separation of Grains(II) -The Measurement of the Terminal Velocities of Grains-)

  • 이종호;조용진;김만수
    • Journal of Biosystems Engineering
    • /
    • 제15권1호
    • /
    • pp.1-13
    • /
    • 1990
  • Aerodynamic property is the most important factor in designing the pneumatic separator and handling equipment for grains and seeds. Particularly the correct information about the terminal velocities of the corresponding grains and seeds is indispensible. However, a few studies with relation to the terminal velocities of grains and seeds were conducted in this country, even though the terminal velocities of the domestic grains and seeds are required to design those equiments which can be used for the domestic grains and seeds having specific aerodynamic properties. In this study, the terminal velocities for four varieties of varley and six varieties of paddy were investigated by means of two different methods, the suspension method and the drop method in an upward current of air. For measuring the terminal velocities, the vertical wind tunnel which had been examined about the uniform air flow in the previous study was used. In addition, the effect of the size of grains and the moisture content of grain kernel on the terminal velocity was examined. The following conclusions were derived from the study : 1. The different terminal velocities of grains are resulted from the different measuring methods. The terminal velocity measured by the drop method is smaller than that by the suspension method. It is considered that the difference in the terminal velocities is caused by the difference in the projection area of grain which is faced to the air stream. 2. The terminal velocity of grain increases as the size and the moisture content of the kernel increase. 3. The linear regression equations for the terminal velocities of grains were derived in terms of the moisture content of grains by the variety of grains and the measuring method. Also, the linear regression equations for the terminal velocity, based on the weighted size of grains, were derived in terms of the moisture contents of granis.

  • PDF

도정효율 증진을 위한 벼 품종특성별 현미선별체 적정크기 (Optimum Sieve-slit width for Effective Removal of Immature Kernels based on Varietal Characteristics of Rice to Improve Milling Efficiency)

  • 이춘기;김정태;최윤희;이재은;서종호;김미정;정응기;김정곤
    • 한국작물학회지
    • /
    • 제54권4호
    • /
    • pp.357-365
    • /
    • 2009
  • 본 연구는 립선별기에서 미숙립 선별능력을 높임으로써 도정효율 증진과 완전미율 향상을 꾀하고자 품종특성을 고려한 립선별기 선별체 최적 조건 구명 시험이 수행되었고, 다음과 같은 결과가 얻어졌다. 1. 립선별기의 선별능력은 현미립 두께에 절대적으로 의존되었는데, 조사된 시험재료의 현미 평균 두께는 1.79(농안)-2.16 mm(대립벼1호)의 분포를 보였다. 2. 품종별 차이는 있었으나, 대체적으로 현미의 평균 립두께가 2.08 mm이상일 경우 1.9 mm 선별체, 2.00-2.08 mm 범위일 경우 1.8 mm 선별체, 1.90-2.00 mm 범위일 경우 1.7mm 선별체, 그 이하일 경우 1.7 mm 이하의 선별체가 정립 손실을 최소화하면서(0.1%이내) 완전미율을 향상시킬 수 있는 조건인 것으로 판단되었다. 3. 백미 품위에 미치는 선별체 분리효과는 미숙립 비율이 높은 품종일수록 크게 발휘되었다. 4. 현미선별 체 눈 크기를 0.1 mm씩 증가시킬 경우 품종별로 현미선벌체 통과물중에 정상립이 포함되어 발생되는 정상립 손실율이 0.5% 수준까지는 현미선별체 눈금크기 증가에 따라 미미하게 증가하였으나, 이 눈금 수준이상에서는 선별체 눈금 0.1 mm 증가에 따라 정상립의 손실율이 급격히 증가하는 것으로 보아 정상립 손실율 0.5% 수준의 눈금이나 그 보다 0.05~0.10 mm 아래 눈금의 선별체가 적당할 것으로 생각되었다.

Empirical analysis of strategy selection for the technology leading and technology catch-up in the IT industry

  • Byung-Sun Cho;Sang-Sup Cho;Sung-Sik Shin;Gang-hoon Kim
    • ETRI Journal
    • /
    • 제45권2호
    • /
    • pp.267-276
    • /
    • 2023
  • R&D strategies of companies with low and high technological levels are discussed based on the concept of technology convergence and divergence. However, empirically detecting enterprise technology convergence in the distribution of enterprise technology (total productivity increase) over time and identifying key change factors are challenging. This study used a novel statistical indicator that captures the internal technology distribution change with a single number to clearly measure the technology distribution peak as a change in critical bandwidth for enterprise technology convergence and presented it as evidence of each technology convergence or divergence. Furthermore, this study applied the quantitative technology convergence identification method. Technology convergence appeared from the separation of total corporate productivity distribution of 69 IT companies in Korea in 2019-2020 rather than in 2015-2016. Results indicated that when the total technological level was separated from the technology leading and technology catch-up, IT companies were found to be pursuing R&D strategies for technology catch-up.

RGB-csb를 활용한 제한된 CNN에서의 정확도 분석 및 비교 (Accuracy Analysis and Comparison in Limited CNN using RGB-csb)

  • 공준배;장민석;남광우;이연식
    • 한국전자통신학회논문지
    • /
    • 제15권1호
    • /
    • pp.133-138
    • /
    • 2020
  • 본 논문은 대부분의 변형된 CNN(: Convolution Neural Networks)에서 사용하지 않는 첫 번째 컨볼루션 층(convolution layer)을 사용해 정확도 향상을 노리는 방법을 소개한다. GoogLeNet, DenseNet과 같은 CNN에서 첫 번째 컨볼루션 층에서는 기존방식(3×3 컨볼루션연산 및 배규정규화, 활성화함수)만을 사용하는데 이 부분을 RGB-csb(: RGB channel separation block)로 대체한다. 이를 통해 RGB값을 특징 맵에 적용시켜 정확성을 향상시킬 수 있는 선행연구 결과에 추가적으로, 기존 CNN과 제한된 영상 개수를 사용하여 정확도를 비교한다. 본 논문에서 제안한 방법은 영상의 개수가 적을수록 학습 정확도 편차가 커 불안정하지만 기존 CNN에 비해 정확도가 평균적으로 높음을 알 수 있다. 영상의 개수가 적을수록 평균적으로 약 2.3% 높은 정확도를 보였으나 정확도 편차는 5% 정도로 크게 나타났다. 반대로 영상의 개수가 많아질수록 기존 CNN과의 평균 정확도의 차이는 약 1%로 줄어들고, 각 학습 결과의 정확도 편차 또한 줄어든다.

유기장업 관리체제 : 게임법제의 태동기 연구 (Regulation System of Amusement Place Business : The Quickening Period of the Game Legislation)

  • 황승흠
    • 한국게임학회 논문지
    • /
    • 제9권1호
    • /
    • pp.43-54
    • /
    • 2009
  • 이 논문은 한국 게임법제의 변천과정을 분석하려는 목적으로 작성되었다. 이 논문에서 논의 되고 있는 유기장업 관리체제는 1973년 유기장법 시행규칙에서 시작하여 1999년에 까지 이르는 시기로 현행 게임법제의 태동기에 해당한다. 이 시기의 법적 규율은 유기장법, 유기장업법, 공중위생법을 거치면서 이루어졌다. 유기장업은 현행 법제의 체육시설업, 유원시설업, 게임제공업으로 분화되었는데, 유기장업 관리체제의 핵심은 현행 게임법제의 게임제공업이 이어받았다. 따라서 유기장업 관리체제 시기는 현행 게임법제의 근간이 형성된 시기라고 할 수 있다. 유기장업 관리체제의 두 핵심요소인 유기기구와 사행성의 분리 문제와 영업장소 규제의 문제는 현행 게임법제에서도 여전히 중요한 문제이다.

  • PDF

위성영상 및 지구물리 영상자료의 호모몰픽 필터링 적용 (Application of Homomorphic Filtering to Satellite Imagery and Geophysical Image Data)

  • 류희영;이기원;권병두
    • 한국지구과학회지
    • /
    • 제26권1호
    • /
    • pp.58-65
    • /
    • 2005
  • 호모몰픽 필터링은 푸리에 변환에 기초를 둔 기법으로 주파수 영역에서 저주파 신호는 약화시키고 고주파 신호는 강화하여 영상의 대비 차를 강화시키는 처리기법이다. 호모몰픽 필터링을 위한 응용 프로그램을 개발하여 인공위성영상과 지구물리 자력탐사 자료를 이미지화한 영상에 시험적으로 적용하여 그 결과를 분석하였다. 영상평활화 기법이나 커널 마스크 처리 등과 같은 영상강화 기법에서는 추출 가능한 경계부의 위치를 변화시키거나 영상의 화소값이 전체 영상을 대상으로 변화시키는 반면에 호모몰픽 필터링은 세부적인 영상 정보의 내용을 선택적으로 강조할 수 있다. 호모몰픽 필터링은 인공위성 영상에서 복잡한 지형지물의 특성을 추출하거나 분리하는 데 효과적인 방법으로 나타났으며 지구물리 영상자료에서 이상대를 조사하는 경우에도 유용하게 적용될 수 있을 것으로 생각된다.

다중 클래스 SVM기반의 침입탐지 시스템 (Intrusion Detection System Based on Multi-Class SVM)

  • 이한성;송지영;김은영;이철호;박대희
    • 한국지능시스템학회논문지
    • /
    • 제15권3호
    • /
    • pp.282-288
    • /
    • 2005
  • 본 논문에서는 기존의 침입탐지 모델인 오용탐지 모델과 비정상 탐지 모델의 장점은 유지하되 단점은 보완하는 견지에서 새로운 침입탐지 모델을 제안한다. MMIDS로 명명된 새로운 침입탐지시스템은 다음의 평가 기준들을 모두 만족하는 차원에서 설계되었다: 1) 시스템에서 학습되지 않은 새로운 공격 유형의 신속한 발견; 2) 탐지된 공격 유형에 대한 세부적 정보의 제공; 3) 빠르고 효율적인 학습 및 갱신으로 인한 경제적인 시스템의 유지/보수; 4) 시스템의 점증성(incrementality) 및 확장성. MMIDS의 핵심 구성요소로 새롭게 제안된 다중 클래스 SVM은 빠르고 효율적인 학습 및 갱신이 가능하여 침입탐지 시스템의 유지보수 비용을 절감할 수 있다. 실험을 통해 유사한 공격 패턴에 대한 분류성능 및 각 공격 유형별 세분화 능력이 우수함을 보인다.

파티션 기반 보안 실시간 운영체제의 구현 및 성능 분석 (Implementation and Performance Analysis of Partition-based Secure Real-Time Operating System)

  • 서경덕;이우진;채병민;김훈규;이상훈
    • 융합보안논문지
    • /
    • 제22권1호
    • /
    • pp.99-111
    • /
    • 2022
  • 네트워크 중심전(NCW)으로 전장환경이 변하면서 무기체계는 IT 기술을 융합한 신개념의 무기체계로 진화하고 있고, 이러한 핵심 기능은 대부분 임베디드 소프트웨어로 구현됨에 따라 임베디드 소프트웨어는 무기체계 성능을 좌우하는 핵심 요소로 중요성이 증가하고 있다. IoT 기술이 발전하고 임베디드 소프트웨어의 활용 범위가 확대됨에 따라 점차 고도화되고 다양해지는 사이버 위협은 임베디드 소프트웨어를 운용하는 무기체계로 확대되고 있고, 무기체계는 단일체계로부터 네트워크에 의한 연동까지 다양한 형태로 운영되기 때문에 어플리케이션 수준에서의 보안보다는 시스템 수준인 운영체제 커널 수준에서의 강력한 사이버 보안이 필요한 실정이다. 본 논문에서는 무기체계 임베디드 소프트웨어를 사이버 공격으로부터 보호하기 위하여 운영체제 수준에서 임베디드 소프트웨어를 보호하는 무기체계용 보안 실시간 운영체제의 설계 및 구현과 그 성능 측정 결과에 대하여 설명하였다.

벼 품종별 입형분리기 최적 가동조건 (The Optimum Operating Conditions of Indented-Cylinder Length Grader to Remove Broken Rice based on Varietal Characteristics)

  • 이춘기;송진;윤종탁;서종호;이재은;김정태;정건호;김정곤
    • 한국작물학회지
    • /
    • 제54권4호
    • /
    • pp.366-374
    • /
    • 2009
  • 벼 품종특성을 고려한 입형분리 최적조건을 설정하기 위하여 다양한 입형 특성을 갖는 41품종의 쌀을 입형분리의 체눈 직경 3.5, 3.8 및 4.2 mm, 싸라기 수거함의 각도 5, 15, $30^{\circ}$ 조건에서 싸라기 분리능을 비교시험 하였고 다음과 같은 결과를 얻었다. 1. 싸라기 제거율은 기기적 측면에서 체눈의 직경과 깊이 및 싸라기 수거함의 각도, 품종적 측면에서 쌀알의 폭, 길이 및 천립중에 의해 주 영향을 받았다. 2. 싸라기 수거함의 각도는 지면과의 수평한 입형분리체 원통직경을 0도로 할 때 +5도와 +15사이에서 분리능이 좋았으며, +5도 이하에서는 완전미손실율 증가하고 각도가 높아질수록 완전미 손실율은 감소하나 분리된 싸라기 량도 감소되었다. 3. 기존 벼 품종에서 쌀알 기준으로 폭과 길이가 각각 2.9와 5.2 mm이상이고, 천립중이 22g 이상일 경우 4.2 mm이상, 폭이 작고 소립인 경우 3.8 mm, 그 밖의 중소립종은 3.8~4.2 mm의 체눈 직경이 적합할 것으로 판단되었다. 4. 립장이 작고, 립폭은 상대적으로 크면서 두께가 얇은 품종은 그렇지 않은 품종보다 싸라기 분리능이 떨어지는 경향이었으며, 품종에 따라 입형분리기 체눈의 직경은 크고 깊이는 얕은 체 눈 규격이 필요한 것으로 생각되었다. 5. 싸라기 비율이 상대적으로 지나치게 높을 경우에는 다소 완전미율의 소실이 있더라도 권장 체눈 크기보다 큰 쪽을 택하는 것이 싸라기 제거량을 높일 수 있었다.

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.