• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

AC impedance measurements on poly-p-phenylenevinylene (PPV) LEDs in the frequency range between 10 Hz and 10$\^$6/ Hz were carried out. The complex-plane impedance spectra indicate that PPV devices can be represented by equivalent circuits that corresponds to the bulk and interfacial regions at high and low frequencies, respectively. As a result of complex impedance analysis through the separation of bulk and interfacial region impedances, increase of forward bias in Al/PPV/ITO devices gave rise to relative decrease of the interfacial region impedance. Above the electric field of 10$\^$6/ V/cm the PPV device showed a space charge limited current (SCLC) conduction. The dependence of the transport mechanism and dielectric properties on the applied bias voltage is discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.117-120
• /
• 2008

The bridge bearings are devices absorbing the displacements of the superstructure. KS F 4420 relative to the design of elastomeric bearings in Korea allows shear deformation up to 70% of total rubber height. For the elastomeric bearings to fulfill their shear function required in the design, the stability of allowable shear strain of elastomeric bearings relative to the shear failure should be guaranteed. Moreover considering the possibility that elastomeric bearings are applied to the seismic design together with isolation devices, elastomeric bearings is supposed to display higher shear performance. In this paper ultimate shear performance tests were performed. The measured ultimate shear strains were over 200%. Therefore an allowable shear strain provision becomes safe. But elastomeric bearings expected to show their performance in one united body reveled the separation of components near 200% shear strain. These separation in elastomeric bearing can cause unexpected impact or concentrated stress to bridge system considering to application of seismic design. Therefore provision relevant to separation problem is necessary.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.250-256
• /
• 2017

A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.431-442
• /
• 2012

The purpose of this study, is to separate magnetic separation devices using permanent magnets by using magnetization characteristics remaining in treated water after adsorption and synthesizing phosphorus adsorbent capable of magnetic separation for efficient removal of phosphorus. The synthesis of the adsorbent which set Zirconium(Zr) having high friendly features for phosphorus as an element, and by synthesizing Iron Oxide($Fe_3O_4$, another name of $Fe_3O_4$ is magnetite) being able to grant magnetism to Zirconium Sulfate($Zr(SO_4)_2$), zirconium magnetic adsorbent(ZM) were manufactured. In order to consider the phosphorus adsorption characteristics of adsorbent ZM, batch adsorption experiment was performed, and based on the results, pH effect, adsorption isotherm, adsorption kinetics, and magnetic separation have been explore. As the experiment result, adsorbent ZM showed a tendency that the adsorption number was decreased rapidly at pH 13; however, it was showed a high amount of phosphorus removal in other range and it showed the highest amount of phosphorus removal in pH 6 of neutral range. In addtion, the Langmuir adsorption isotherm model is matched well, and D-R adsorption isotherm model is ranged 14.43kJ/mol indicating ion exchange mechanism. The result shown adsorption kinetics match well to the Pseudo-second-order kinetic model. The adsorbent ZM's capablility of regenerating NaOH and $H_2SO_4$, was high selectivity on the phosphorus without impacts on the other anions. The results of applying the treated water after adsorption of phosphorus to the magnetic separation device by using permanent magnets, shows that capture of the adsorbent by the magnetization filter was perfect. And they show the possibility of utilization on the phosphorus removal in water.

• Journal of Yeungnam Medical Science
• /
• v.17 no.1
• /
• pp.93-98
• /
• 2000

Symphysis pubis Reparation is an uncommon but not rare complication of delivery. Characteristic symptoms of symphyseal separation include suprapubic pain and tenderness which radiale to the back or legs, difficult ambulation, and bladder dysfunction. Clinical history, presenting symptoms, and response to therapy are sufficient to make the diagnosis, although radiographic documentation of symphyseal separation by x-ray or ultrasound are frequently used to confirm the diagnosis. The underlying etiology of symptomatic symphyseal separation has not been fully elucidated. Associations with macrosomia, pathological joint loosening. and increased force placed on the pelvic ring have been suggested as possible etiologies. Conservative therapy, including bed rest, pelvic binders, ambulation devices, and mild analgesics usually result in complete recovery within 4-16 weeks. Our experience of three cases of peripartum symphysis pubis separation delivered from 1998 to 1999 were reviewed with related articles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.767-773
• /
• 2010

This paper describes development of a non-explosive separation device which can be equipped on small satellites. The spur geared micro DC motor, which has high reliability and advantage of price, is adopted as an actuator. The proposed separation device has resettability and it does not need extra jig to reload. In addition, the simple structure makes it easy to fabricate and assemble. To verify the performance of the proposed device, the response time tests, maximum preload tests and maximum shock level tests were performed. Also, through the vibration tests and thermal vacuum tests, feasibility of the proposed separation device was shown in launching and space environments. Therefore, we expect that the proposed separation device can replace the imported separation devices in near future.

• Journal of the Daesoon Academy of Sciences
• /
• v.40
• /
• pp.77-114
• /
• 2022

The purpose of this study is to analyze the ideological background, legal composition, and separation of powers contained within the institutional devices of The Dao Constitution based on the basic principles of the legal system, which would be embodied in The Constitution of the Republic of Korea. The ideological background of The Dao Constitution is that of the religion, Daesoon Jinrihoe. In Daesoon Jinrihoe, it is held that the Supreme God, Sangje, determined that Mutual Contention, the ruling pattern of the Former World, ran contrary to His divine will and this endangered the world as nature and humans had also fallen into Mutual Contention. As an act of divine intervention, Sangje established Mutual Beneficence so that nature and humanity could follow Mutual Beneficence as a paradigm shift culminating in a Great Opening of the universe. Sangje, the agent behind the paradigm shift, revealed His divine will that humans transform into mutually beneficent humans. Therefore, The Dao Constitution was written to be a set of fundamental norms based on the 'rights and obligations of the members of Daesoon Jinrihoe' to accept and implement the will of Sangje as it applies to each member's mission. The legal composition of The Dao Constitution consists of the body and supplementary provisions. The text consists of general rules, moral rights and obligations, origins, and institutional devices. Institutional devices include the Central Council, the Institute of Propagation and Edition, the Institute of Religious Services, Works, Financial Management, and the Institute of Audit and Inspection. The legal composition of The Dao Constitution is similar to that of the Constitution. The difference is that while the Constitution applies a 'principle of maximum rights and minimum obligations,' The Dao Constitution stipulates more obligations than rights in order to complete the mission of the members. The principle of separation of powers is applied to the institutional devices in The Dao Constitution. In The Dao Constitution, the organizational form of the central headquarters has been divided into a 'before and after' scheme surrounding the death of Dojeon. The organizational form of the central headquarters prior to Dojeon's death was similar to a Constitutional Monarchy. After the death of Dojeon, the central headquarters' organizational form became similar to a parliamentary cabinet system. The separation of powers at central headquarters is divided among a legislative power (the Central Council), an executive power (the Institute of Religious Services), and a judicial power (the Institute of Audit and Inspection). The separation of powers within the functions of the central government first occurs between the Central Council and its employees, then between the Central Council and the Institute of Auditing and Inspection, and also between the Legislative Government and the Institute of Religious Services. Furthermore, the principle of a vertical separation of powers exists between the central headquarters and the local organization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.842-846
• /
• 2016

It's possible for a human to breathe under water, but the amount of dissolved oxygen in the water is small and a large amount of water is necessary to obtain sufficient dissolved oxygen from water. So, large separation system with large water pumps, having large surface areas, and large battery sources are needed. Exhalation gases are used to solve this problem. Theses gases contain some oxygen, nitrogen, and carbon dioxide; they contain less oxygen and more carbon dioxide compared to air. Therefore, reduction of the amount of carbon dioxide is necessary. If exhalation gases are employed appropriately, the separation device can be made more compact. Inlet water mixed with exhalation gases is supplied into the separation device, and dissolved gases are separated from the mixed water as it passes through the device. The inlet part of a typical separation system with a water delivery pump before the membrane module has more than one atmosphere. Hence, a compressor is used to mix the exhalation gases. In this study, the pressure at the inlet due to the use of a suction pump after the membrane module was less than one atmosphere; hence, compressors were not required. Separation characteristics were studied using a separation device without a compressor. The use of exhalation gases led to an increase in the amount of dissolved gases being separated. As the amount of inlet exhalation gases was increased, the separation of dissolved gases was increased as well.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.506-511
• /
• 2015

IOV is a technology that supports one or more virtual desktops, and can share a single physical device. In general, the virtual desktop uses the virtual IO devices which are provided by virtualization SW, using SW emulation technology. Virtual desktops that use the IO devices based on SW emulation have a problem in which service quality and performance are declining. Also, they cannot support the high-end application operations such as 3D-based CAD and game applications. In this paper, we propose a physical network separation system using Virtual Desktop Service based on HW direct assignments to overcome these problems. The proposed system provides independent desktops that are used to access the intranet or internet using server virtualization technology in a physical desktop computer for the user. In addition, this system can also support a network separation without network performance degradation caused by inspection of the network packet for logical network separations and additional installations of the desktop for physical network separations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.589-590
• /
• 2013

The fast development of electronic devices towards wireless, portable and multi-functionality desperately needs the self-powered and low maintenance power sources. The possibility to coupling the nanogenerator to wearable and portable electronic device facilitates the self powered device with independent and self sustained power source. Nanogenerator has ability to convert the low frequency mechanical vibration to electrical energy which is utilized to drive the electronic device [1]. The self powered power source has the ability to generate the power from environment and human activity has attracted much interest because of place and time independent. The human body motion based energy harvesting has created huge impact for future self powered electronics device applications. The power generated from the human body motion is enough to operate the future electronic devices. The energy harvesting from human body motion based on triboelectric effect has simple, cost-effective method [2, 3] and meet the required power density of devices. However, its output is still insufficient to driving electronic devices in continues manner so new technology and new device architecture required to meet required power. In the present work, we have fabricated the triboelectric nanogenerator using PDMS polymer. We have studied detail about the power output of the device with respect to different polymer thickness and varied separation distance.